Monster Truck

FEATURES:Scale: 1/32Rear wheel driveProportional speed control2-Speed (Low- und High-Speed) switchable through remote control2.4GHz radio technology2 LED front lightsShock resistant materialWheels with rubber treadsFull-suspension chassisAdjustable straight trackingCharging time approx. 20-30 minutes / Driving time approx. 15 MinutesVehicle size L/W/H: 12 x 8,5 x 5,5 cmSET CONTAINS:1/32 RC car with built-in batteryRemote controlUSB charging cableManual REQUIRES:2x AA batteries for remote control

FEATURES:Scale: 1/32Rear wheel driveProportional speed control2-Speed (Low- und High-Speed) switchable through remote control2.4GHz radio technology2 LED front lightsShock resistant materialWheels with rubber treadsFull-suspension chassisAdjustable straight trackingCharging time approx. 20-30 minutes / Driving time approx. 15 MinutesVehicle size L/W/H: 12 x 8,5 x 5,5 cmSET CONTAINS:1/32 RC car with built-in batteryRemote controlUSB charging cableManual REQUIRES:2x AA batteries for remote control

The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-plug. To fully utilise the potential of the vehicle, we recommend a 2S/7.4V LiPo battery for operation. In addition, a separately available programming box (item no. 2110062) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 6kg servo handles the steering commands. The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle enormously. Handling also becomes almost impossible due to the enormous over-motorisation. We therefore generally advise against 3S operation. 4 adjustable aluminium oil-pressure shock absorbers offer ideal handling, making driving a lot of fun. The spring preload can be adjusted using a knurled screw. This allows the suspension to be perfectly customised to your needs.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that the settings can be easily adjusted using leversHighlights:4WD all-wheel drive2.4 GHz 4-channel remote control system60A brushless speed controller (waterproof; T-plug; programmable)3421KV brushless motor (sensorless; splash-proof)15kg steering servo with metal gears (25T, ball bearings)8 aluminium oil pressure shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish monster truck body with plastic add-on parts"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:Scale 1:10Dimensions (L/W/H): 425x300x200 mmWeight: 2090gWheelbase: 270mmGround clearance: approx. 45mmTrack width: 250mm front/rearWheels front/rear: Durchmesser: 116mm / width: 57mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 100mmEngine gear ratio: Pinion: 21T / main gear: 64T (module 0.6) Scope of delivery:1/10 Brushless Monster Truck "AMT3.4V2BL" RTR2.4GHz "CR4S" remote controlSticker sheetinstruction manualadditionally required:4x AA batteries for remote control7.4V/2S* LiPo drive battery (*recommended)Charger for LiPo batteriesProgramming box for individual settings on the speed controller

Extremly durable composite plastic partsMonocoque suspension arms Fully adjustable chassis conceptHardened steel motor pinionExtremly durable plastic spur gear Adjustable oil-filled 16mm Big Bore shocks3 full-metal geared differentials2-piece sliding motor mount concept for easy adjustment and instalationMassive 5.0mm CVD axles - front & rear4.5mm middle steel drive shafts - front & rearRace compound low profile tires"Saddle-Pack" battery concept for a perfect weight distribution3mm black aluminum chassis plate with ABSIMA laser engravingsAluminum servo armSeperate water- and dust-proof receiver boxCompletely ball bearing mountedChassis sideguards for dirt protectionAll aluminum parts anodized in goldAluminum 17mm wheel hex drivesSteel turnbuckles all-overAdjustable camber, toe angle & ride heightSPEED UP TO 70 KM/HElectrics:ABSIMA "CR2SV2" 2.4GHz A.F.H.D.S. radio system (servo reverse and dual rate function; foam steering wheel) Water-proof 120A HOBBYWING speed controller (BEC: 6V/3A; programmable features: LiPo cut-off, runing mode, brake force, drag brake, punch)Powerfull 2300KV 4-pole sensorless brushless motor (650W, Shaft Durchmesser: : 5mm, Module 1)9kg / metal gear steering servo (25T outdrive) with aluminum servo arm Specs:Scale: 1:8Drive type: 4WDSurface: Off-roadWheelbase: 375mmChassis clearance: 45mm Tire width: 82mmTire Durchmesser: : 165mmMotor transmission: Pinion: 13T / Spur gear: 49TPinion module: 1.0Length: 555mmWidth: 445mmHeight: 205mmWeight: 4430g (w/o batteries) Included:Assassin Gen2.1 Monster Truck - 4S Version 2.4GHz Radio System "CR2SV2"ManualWhat you will need:2x 7.4V LiPo batteries with T-plugsSuitable chargerLiPo charging bagOptional programm box for easy setup (#ABS-2110041) 4pcs. AA batteries for transmitter

Discover the RC model sport with the "First Step Performance" from Absima. Up to 36 KM/H and power to the max you will get with this awesome model. Of course you will be supported by real RC technique. A safe 2.4 GHz remote control system supports the electronic speed controller to release the power at your command. This RC buggy is made of high quality and strong material with capacity in anti-collision and beat resistance. With soft hollow rubber tires and professional shock absorbing system features great performance. Take the first step into the world of RC modelsport with this ready-to-run set!Enjoying real RC racing with the 1/14 4WD RC car, you can get started quickly and handle it like a pro. Competing with other advanced RC car lovers and enjoying the exciting racing on the street, in your backyard or in the woods!. HIGHLIGHTS:Water-resistant electronicIncl. car batteries and USB charging cable Speed up to 36 KM/HAll spare parts availableNice handling - perfect fro beginnersGENERAL CHASSIS FEATURES: 1/14th Scale4WDCompletely ball bearing mounted2.2kg Steering ServoFront & rear differentialsComplete covered transmission Gears made from extreme durable nylon materialPinion made from copper Independent suspension systemHigh performance 390 Motor and speed controllerFront CVD drive shafts Range aprox. 60mDrive time: aprox. 16 MinutesAluminum cardan shafts Adjustable speed via remote controlOverheat protection Incl. 2.4GHz radio systemNice detailed body designOvercharge & Over-discharge Protection 2x 3.7V 1500mAh Li-Ion Car Battery"Saddle Pack" battery layout for a perfect weight distributionIncluding a full-size spare wheelTECHNICAL SPECIFICATION:Car size: (L/W/H): 295 x 230 x 125 mmWeight: 845g (w/o batteries)Wheelbase: 190 mmChassis Clearance: 40 mmTire Width: 45 mmWheel Durchmesser: : ± 85 mmShock Oil Viscosity : n.a.Shock Spring Force: MediumShock Instalation Length: 65 mm front/rearSCOPE OF DELIVERY: 1/14th RC Car 2.4 GHz Radio System 2x Li-Ion 3.7V 1500mAh Car BatteriesUSB Charging CableManualREQUIRED ACCESSORIES:3 AA Cells for Radio

Discover the RC model sport with the "First Step Performance" from Absima. Up to 36 KM/H and power to the max you will get with this awesome model. Of course you will be supported by real RC technique. A safe 2.4 GHz remote control system supports the electronic speed controller to release the power at your command. This RC buggy is made of high quality and strong material with capacity in anti-collision and beat resistance. With soft hollow rubber tires and professional shock absorbing system features great performance. Take the first step into the world of RC modelsport with this ready-to-run set!Enjoying real RC racing with the 1/14 4WD RC car, you can get started quickly and handle it like a pro. Competing with other advanced RC car lovers and enjoying the exciting racing on the street, in your backyard or in the woods!. HIGHLIGHTS:Water-resistant electronicIncl. car batteries and USB charging cable Speed up to 36 KM/HAll spare parts availableNice handling - perfect fro beginnersGENERAL CHASSIS FEATURES: 1/14th Scale4WDCompletely ball bearing mounted2.2kg Steering ServoFront & rear differentialsComplete covered transmission Gears made from extreme durable nylon materialPinion made from copper Independent suspension systemHigh performance 390 Motor and speed controllerFront CVD drive shafts Range aprox. 60mDrive time: aprox. 16 MinutesAluminum cardan shafts Adjustable speed via remote controlOverheat protection Incl. 2.4GHz radio systemNice detailed body designOvercharge & Over-discharge Protection 2x 3.7V 1500mAh Li-Ion Car Battery"Saddle Pack" battery layout for a perfect weight distributionIncluding a full-size spare wheelTECHNICAL SPECIFICATION:Car size: (L/W/H): 295 x 230 x 125 mmWeight: 845g (w/o batteries)Wheelbase: 190 mmChassis Clearance: 40 mmTire Width: 45 mmWheel Durchmesser: : ± 85 mmShock Oil Viscosity : n.a.Shock Spring Force: MediumShock Instalation Length: 65 mm front/rearSCOPE OF DELIVERY: 1/14th RC Car 2.4 GHz Radio System 2x Li-Ion 3.7V 1500mAh Car BatteriesUSB Charging CableManualREQUIRED ACCESSORIES:3 AA Cells for Radio

Discover the RC model sport with the "First Step Performance" from Absima. More than 35 KM/H and power to the max you will get with this awesome model. Of course you will be supported by real RC model technique. A safe 2.4 GHz remote control system supports the 40A electronic speed controller to release the power at your command. Small, fine, and mean! Take the first step into the world of RC model sport with this ready-to-run set. Enjoying real RC racing with the 1/16 4WD RC car, you can get started quickly and handle it like a master. Competing with other advanced RC car lovers and enjoying the exciting racing on the street, in your backyard or in the woods!. HIGHLIGHTS:Water-resistant ElectronicIncl. Car Battery and USB Charging Cable Incl. LED Headlights GENERAL CHASSIS FEATURES:1/16th Scale4WDComplete Ball Bearing1.8kg Steering ServoFront & Rear DifferentialsDifferential gears and motor pinion made from metalShocks with Aluminum CapsHigh Performance Motor and Speed ControllerCVD Drive Shafts Range aprox. 60mDrive Time: aprox. 12 MinutesAluminum Cardan Shafts Adjustable Speed on the RadioOverheat Protection Incl. LED HeadlightsIncl. 2.4 GHz Radio SystemPartly clear bodyshell for style and customizationOvercharge & Over-discharge Protection 500mAh Li-Ion Car BatteryTECHNICAL SPECIFICATION:Measure: (L/W/H): 270 x 235 x 130 mmWeight : 730gWheelbase: 175 mmChassis Clearance: 45 mmTrack Width: 190 mm front/rearWheel Design: Monster Rubber / 5 Double Spoke RimsTire Width: 45 mmReifen Durchmesser: : ± 80 mmShock Oil Viscosity : n.a.Shock Spring Force: MediumShock Instalation Length: 65 mm front/rearSCOPE OF DELIVERY: 1/16th RC Car 2.4 GHz Radio System Car BatteryUSB Charging CableLED HeadligthsManualREQUIRED ACCESSORIES:3 AA Cells for Radio

Discover the RC model sport with the "First Step Performance" from Absima. More than 35 KM/H and power to the max you will get with this awesome model. Of course you will be supported by real RC model technique. A safe 2.4 GHz remote control system supports the 40A electronic speed controller to release the power at your command. Small, fine, and mean! Take the first step into the world of RC model sport with this ready-to-run set. Enjoying real RC racing with the 1/16 4WD RC car, you can get started quickly and handle it like a master. Competing with other advanced RC car lovers and enjoying the exciting racing on the street, in your backyard or in the woods!. HIGHLIGHTS:Water-resistant ElectronicIncl. Car Battery and USB Charging Cable Incl. LED Headlights GENERAL CHASSIS FEATURES:1/16th Scale4WDComplete Ball Bearing1.8kg Steering ServoFront & Rear DifferentialsDifferential gears and motor pinion made from metalShocks with Aluminum CapsHigh Performance Motor and Speed ControllerCVD Drive Shafts Range aprox. 60mDrive Time: aprox. 12 MinutesAluminum Cardan Shafts Adjustable Speed on the RadioOverheat Protection Incl. LED HeadlightsIncl. 2.4 GHz Radio SystemPartly clear bodyshell for style and customizationOvercharge & Over-discharge Protection 500mAh Li-Ion Car BatteryTECHNICAL SPECIFICATION:Measure: (L/W/H): 270 x 235 x 130 mmWeight : 730gWheelbase: 175 mmChassis Clearance: 45 mmTrack Width: 190 mm front/rearWheel Design: Monster Rubber / 5 Double Spoke RimsTire Width: 45 mmReifen Durchmesser: : ± 80 mmShock Oil Viscosity : n.a.Shock Spring Force: MediumShock Instalation Length: 65 mm front/rearSCOPE OF DELIVERY: 1/16th RC Car 2.4 GHz Radio System Car BatteryUSB Charging CableLED HeadligthsManualREQUIRED ACCESSORIES:3 AA Cells for Radio

Discover your modelling soul with the First Step Performance from Absima. The "Mini AMT" monster truck is over 36 km/h fast and has plenty of power! Of course, you are supported by real modelling technology. In addition to a safe 2.4 GHz remote control, a 40A speed controller unleashes the power at your command and lets you party. Small, sleek and fast - take your first step into the world of modelling.Highlights:Splash-proof Includes rechargeable battery and USB charging cable LED headlight included Original spare parts available Features:4WD all-wheel driveFully ball-bearing mounted2 differentials High-current plug (T-plug) High-performance motor and 40A speed controllerCVD drive shafts (front)Radio range approx. 60m Driving time with full battery: +/- 20 minutesAluminium gimbal driveAdjustable speed on the transmitterOverheating protectionLED front lighting includedIncludes 2.4 GHz remote control systemBodywork with sticker sheet for customisationWheelie bar (included in the scope of delivery)Technical data:Dimensions (L/W/H): 270 x 215 x 130 mmWeight: 730 gWheelbase: 175 mmGround clearance: 45 mmTrack width: 175 mm front / 175 mm rearTyres: Monster Rubber / 5 double-spoke rimWheels front/rear: 40 mm width / Durchmesser: ± 80 mmShock absorber installation length front/rear: 70 mmScope of delivery:1* Mini AMT Monster Truck1* 2.4 GHz remote control system1* 7.4V Li-Ion battery 1500mAh1* USB charging cable1* Wheelie bar1* instruction manualadditionally required:3* AA batteries for the remote controlSpare battery for longer driving time

Discover your modelling soul with the First Step Performance from Absima. The "Mini AMT" monster truck is over 36 km/h fast and has plenty of power! Of course, you are supported by real modelling technology. In addition to a safe 2.4 GHz remote control, a 40A speed controller unleashes the power at your command and lets you party. Small, sleek and fast - take your first step into the world of modelling.Highlights:Splash-proof Includes rechargeable battery and USB charging cable LED headlight included Original spare parts available Features:4WD all-wheel driveFully ball-bearing mounted2 differentials High-current plug (T-plug) High-performance motor and 40A speed controllerCVD drive shafts (front)Radio range approx. 60m Driving time with full battery: +/- 20 minutesAluminium gimbal driveAdjustable speed on the transmitterOverheating protectionLED front lighting includedIncludes 2.4 GHz remote control systemBodywork with sticker sheet for customisationWheelie bar (included in the scope of delivery)Technical data:Dimensions (L/W/H): 270 x 215 x 130 mmWeight: 730 gWheelbase: 175 mmGround clearance: 45 mmTrack width: 175 mm front / 175 mm rearTyres: Monster Rubber / 5 double-spoke rimWheels front/rear: 40 mm width / Durchmesser: ± 80 mmShock absorber installation length front/rear: 70 mmScope of delivery:1* Mini AMT Monster Truck1* 2.4 GHz remote control system1* 7.4V Li-Ion battery 1500mAh1* USB charging cable1* Wheelie bar1* instruction manualadditionally required:3* AA batteries for the remote controlSpare battery for longer driving time

High performance, sensitive control and a GPS module for live data transmission to a mobile device - these are the ingredients of our latest vehicle series. The 1:16 scale monster truck also includes many newly developed building blocks that enable greater durability of the drive components: These include metal oil-pressure shock absorbers, metal CVD drive shafts, metal differentials, metal cardan shafts and a ball bearing. All electronics are protected from splash water for unrestricted outdoor use. The 390 brushed racing motor in conjunction with 2S LiPo power allows speeds of up to 40 km/h. At the touch of a button on the transmitter, the model engages the turbo and sets itself up on the rear wheels. Cool wheelies are real fun. Thanks to the wheelie bar included in the scope of delivery, the vehicle does not land on its back. With the LED lighting, which can also be switched, the great action is possible at any time, even in the dark. At the same time, the large, soft high-grip rubber tyres ensure full control on any surface. In addition to a dual rate setting for the steering, the transmitter also allows proportional throttle channel throttling. This means that the maximum achievable speed can be limited for beginners if necessary, in order to have more safety during the first driving attempts. The handy remote control transmits all functions without interference and, thanks to the 2.4 GHz system, also allows several models to be operated in parallel. The monster truck is supplied in an RTR (Ready-to-Run) package, i.e. in addition to the remote control, the battery and a charging cable are already included. After initial charging, you can get started straight away. As a bonus, the set also includes a practical smartphone holder: Simply clamp it to the remote control, dock your mobile phone and all relevant GPS data is always directly in view.HIGHLIGHTS:GPS module: Live data display such as position and speed on mobile device Metal CVD drive shafts: on all axles for direct, wear-free drive Ball bearings: increased longevity of the drive componentsFURTHER FEATURES:RTR package (Ready-to-Run) incl. remote control, battery, charger2S LiPo power with 7.4V and 1050mAh in the hardcase battery specially developed for the seriesProfessional brushed racing motor for high speeds of up to 40km/hTurbo button on the transmitter for extreme acceleration and cool wheeliesFast steering servo for agile direction changes on any surfaceRobust body with internal frame for high strengthComposite chassis for durabilityAdjustable metal oil-pressure shock absorbers Metal propshaftMetal differentialsHigh ground clearance (approx. 40mm)Quick release bonnet, no body clips requiredBright switchable LED lighting built inHigh-grip rubber tyresAdjustable dual rate for steering and throttleTECHNICAL DATA:Scale: 1:16Length: 310mmwidth: 220mmHeight: 135mmWeight: 1104g incl. batteryWheelbase: 175mmTrack width front: 180mmTrack width rear: 180mmGround clearance: approx. 40mmFront wheels: outer diameter/width 80/40mmRear wheels: outer diameter/width 80/40mm Rim diameter: 50mmGearbox: metalFront shocks: 60mmRear damper: 60mmBrake: ElectronicController: BrushedEngine: 390Drive system: Cardan metalSteering servo: MiniMain material: Composite plasticBattery compartment dimensions: 110x35x24mmBattery: LiPo 2S 7,4V 1050mAh, 25C, Hardcase, Deans connector / T-Plug, 78x34x29mm, 74gDriving time: up to 12min, depending on driving styleTop speed: up to 40km/hRemote control: 3-channel, 2,4GhzRange: approx. 100mCharger: USB balancer charger with 7.4V 1.5A output powerCharging time: approx. 60minSCOPE OF DELIVERY:VehicleRemote controlBatteryChargerGPS module Smartphone holderWheelie barScrew setToolsInstruction manual DE/ENREQUIRED ACCESSORIES:3x AA batteries for the remote control

Designed as an ARTR version for 8S LiPos (2x 4S 14.8V), this 4WD monster truck in 1:7 scale brings extreme speeds of 95+km/h to the asphalt. Speed and power are efficiently combined in this giant in the Pro variant: Features include, for example, a Hobbywing EzRun MAX6 160A 8S ESC, 4292 brushless motor with 1450kv and a 35kg steering servo with metal gearbox and steel drive shafts. The bright LED lighting enables hot off-road action even in the dark - and also makes the Mammoth Extreme an eye-catcher.Extreme high speed: The 8S drive allows you to really put the pedal to the metal and accelerate to over 95km/h. The oversized monster truck tyres provide brute propulsion on any surface. A massive centre differential enables optimal power distribution to both axles. Thanks to the high ground clearance, there are hardly any obstacles that this colossus cannot overcome. If you want to accelerate hard and never lose your balance at the same time, you will find true joy in this AMXRacer. Long-lasting pleasure: All important components such as the main gear, differentials and drive train are made of steel. To withstand even tougher stress tests, the motor and controller are actively cooled with fans. CNC-machined aluminium shock towers and massive adjustable oil-pressure shock absorbers swallow every blow during the ride. A 5mm aluminium chassis plate ensures high torsional rigidity, which comes into its own especially when operating on rough terrain. Safe handling: Thanks to the modern 2.4 GHz transmitter with dual-rate function, the maximum deflections of the steering and throttle can be adjusted in such a way that sensitive steering is possible even at these top speeds. Even the directions can be adjusted separately. With the AMXRacing Mammoth Extreme monster truck, everyone who loves sporty, powerful driving fun will get their money's worth.HIGHLIGHTS:Hobbywing EzRun MAX6 160A 8S ESC: For extreme speeds up to 95+km/h (on 8S).Massive centre differential: For optimum power distribution to both axlesOTHER FEATURES:Steel main gearSteel differentialsSteel drive trainSteel centre differentialCNC-machined aluminium shock towersSteering hub in CNC-machined aluminiumCNC-machined aluminium pin-holders35kg standard size steering servo Metal gearbox4WD drivePowerful brushless motor for 6-8S power with 1450kvHigh-quality 2.4GHz system for maximum range and sensitive controlTECHNICAL DATA:Scale: 1:7Length: 700mmWidth: 510mmHeight: 310mmWeight: approx. 8000g Wheelbase: 430mmTrack width front: 400mmTrack width rear: 400mmGround clearance: 90mmFront wheels: Outer diameter/width 188/102mmRear wheels: Outer diameter/width 188/102mmRim diameter: 110mmGearbox: SteelFront shocks: 135mmRear shocks: 145mmGearbox: steelGear ratio: 16,5:1Brake: Electronic/MotorESC: Hobbywing EzRun MAX6 160A 8S ESCEngine: Rocket 4292 1450kvDrive system: Cardan (steel)Steering servo: Standard size, metal gearbox, 35kg actuating force, 25T metal servo hornMain material: CNC machined aluminiumBattery compartment dimensions: 160x50x60mmBattery: Recommended are 2x 3S or 2x 4S LiPo battery with min. 5000mAh 30C and XT90 contactsRide time: Up to 15min, depending on battery selectedTop speed: approx. 95+km/h (8S LiPo) or 80km/h (6S LiPo)Remote control: 2.4GHz, 4-channel, with dual rate for steering and throttle (both directions can be controlled separately)SCOPE OF DELIVERY:ModelRemote controlVarious accessoriesOperating instructions DE/ENREQUIRED ACCESSORIES:4x 1.5V Mignon batteries for the remote control2x 3S or 2x 4S LiPo battery with XT90 contacts and charger

Required itemsFour (type AA) batteries2x 11,1V battery with XT90-connectorCharger

Features:- New Color Scheme- Alloy Center Diff- 50T Steel Main gear- Updated Suspension Arm Front Lower- Updated Suspension Arm Rear Lower- Updated Servo Saver Plate- Updated Rear Chassis Brace- Updated Front Shock Stay Brace- Updated Wing Stay- New Ackerman Plate 7075 material 3mm- New Wing Connecting Brace- New Wing Washer- Alloy Front Upper Arm Stiffener Plate- New Motor / Diff Mount- Extra Hardened Drive Joints- New Composite Steering links- New Composite Rear Upper Links- Updated 1 Wheel Wheelie Bar w/ Composite Side Struts- New Front Bumper w/ integrated Skid Plate- New Rear Bumper w/ integrated Skid Plate- 25 KG Digital Servo - HV - Steel Gears - CRHV-7225"Specifications:Length: 565mmHeight: 210mmWidth: 455mmWheelbase: 327mmWeight: (No Battery): 4800gWheel Size (diameter, width): 170x78.5mmNo Battery or Charger

Required itemsFour (type AA) batteries2x 11,1V battery with XT90-connectorCharger

Bonus Chassis Xtreme Brace kit includedFeatures:- Alloy Center Diff- 50T Steel Main gear- Updated Suspension Arms- Updated Chassis Braces- Updated Wing Stay- Alloy Front Upper Arm Stiffener Plate- Extra Hardened Drive Joints- Composite Steering links- Composite Rear Upper Links- 25 KG Digital Servo - HV - Steel Gears - CRHV-7225"No Battery or Charger

Required itemsFour (type AA) batteries2x 11,1V battery with XT90-connectorCharger

An Entirely New Level of 1/10 Monster Truck Performance and DurabilityThe new Sketer XP 4WD 1/10 Scale Brushless Monster Truck from Team Corally delivers a performance experience like no other vehicle. With a 4S battery, enjoy effortless wheelies when earthbound and backflips when airborne. If a nimbler and more responsive feel is preferred, drop in a 3S pack for a truly satisfying and unique driving experience.Using a fresh, innovative design approach toward a blend of versatility and performance while remaining remarkably durable, the Sketer platform designers emphasized chassis strength and stiffness, ideal suspension travel and spring/dampener rates, and convenience details like wire routing and convenient component cooling. Using heavy-duty, overqualified components like the Torox 135 2-4S programmable ESC with low voltage LiPo protection and Kuron 725 2150Kv 4-pole brushless motor from the larger 1/8 scale Radix 4 buggy, the Sketer emphasizes best-in-class innovation and execution. Why settle for basically acceptable or merely adequate?Not only are the electronics considered best-in-class, but the driveline and differential components are either exactly the same part or at minimum the same material as used in Team Corally RTR 1/8-scale 6S machines. If you're looking for large-scale performance in a 1/10-scale monster bashing/stunt truck, look no further than the Sketer XP from Team Corally!Driving in any season, anytime, anywhereThe Team Corally Sketer XP is equipped with water resistant electronics, making it ready for use in most conditions. Not only is the ESC resistant to splashing water and mud, but the steering servo and receiver are also weatherproofed by special water-resistant PCB coatings. Further protection and resistance to dirt, rocks, and moisture is provided by the innovative chassis splash guard system. Of course, the Sketer comes standard with high quality ball bearings with rubber seals, which means you can drive virtually anywhere and under most conditions.(Please note that no RC vehicle should be driven or submerged in water or mud. Be careful when driving in extreme conditions, and proper maintenance, such as cleaning and lubricating, should be performed after driven in mud, water or near salt water.)Unique Front Chassis Brace SystemThe innovative front chassis brace design strengthens, supports, and connects the steering bellcranks, front bulkhead, and front shock tower into one super-strong assembly for unmatched durability and reliability. The optimal combination of aluminum and composite components allows drivers to bash with confidence knowing that the Sketer is prepared to dominate anything in its path.Center Chassis BraceAn innovative and robust 2-piece center brace connects the bulkheads and shock towers together with durable 12mm aluminium tubes and composite sockets to create a "backbone" of enormous strength and durability between the brace and the shock tower.Massive Chassis Dirt/Moisture GuardThe Sketer employs a rigid, tall-sided chassis guard that serves to both protect components and maintain rigidity. The high sides keep dirt, rocks, and moisture away from the motor, ESC, battery pack and fans, while a new larger receiver box with convenient cable management system delivers a tidy look to your machine.Adjustable Wheelie BarThe Sketer features an adjustable, mono-roller wheelie bar with multiple position choices for optimized acceleration or maximum wheelie angle at launch. The roller wheel is ball-bearing supported and delivers maximum durability thanks to its compact design.Bulletproof, Heavy-Duty Steel DrivetrainFitting for a premium bashing monster, the Sketer features front, center, and rear silicone fluid-filled and sealed bevel gear differentials that deliver the full amount of available power to the ground from the 2150KV Kuron 725 motor. With easy removal and maintenance, you can even alter each differential individually to fine-tune the amount of traction in front or rear! Inside, you'll find a complete set of metal gears and Swiss-steel outdrive cups that connect to steel driveshafts. The front end of the Sketer feature hardened-steel CVD driveshafts for performance, durability, and maximum suspension travel, while the entire drivetrain is supported by high-quality 8x16x5mm rubber sealed ball bearings for minimum rolling resistance and maximum efficiency.Team Corally Sketer XP RTR Factory-built 1:10 scale Extreme Monster Truck Features List:o Speeds of 80+ km/h (50+ mph) possibleo Team Corally TOROX 135 2S-4S brushless electronic speed controllero Team Corally KURON 725 - 2150 KV 4-pole sensorless brushless motoro Varioprop CRHV-7225 High Torque, High Voltage Digital Servo with Metal Gears and 25Kg Torqueo Ergonomic Team Corally CT2R transmitter with interference-free 2.4GHz technologyo Precision aluminium steering servo armo 3mm 7075 aluminum double-deck steering Ackermann systemo 7075 aluminum black-anodized suspension hinge pin braceso Innovative chassis side guards and sealed radio box with convenient cable management systemo Adjustable battery holder fits all common LiPo batterieso Complete set of high quality rubber-sealed ball bearingso Hardened steel spur gear and motor piniono Oversized 8 x 16 x 5mm transmission ball bearingso Three sealed metal differentials individually filled with silicone fluido Aluminium/Steel center differentialo High-quality, CNC-machined spiral gearso Heavy-duty Swiss spring steel outdriveso Quick, convenient diff access for ease of maintenanceo Heavy Duty aluminium motor mount with composite nylon spur gear covero 52T Steel Spur Gearo Hard-coated metal drive train componentso Extra surface-hardened steel front CVD joints for maximum suspension travelo Aluminium 17 mm drive hexeso Oil-filled threaded 16 mm aluminium Big Bore shockso Exclusive shock spring perch locking systemo Nylon composite shock cap protectorso 5mm CNC aluminium shock towers, front and rearo Alloy front upper arm stiffener plateo Independent front suspension with pivot ball systemo Independent rear suspension with upper and lower armso Optimized, custom engineered composite partso All-new heavy-duty composite steering knuckleso Heavy-duty one-piece composite suspension links and tie rodso Aluminium suspension mounts with composite coverso Team Corally RSP front and rear anti-roll bar systemo Aluminium chassis plateo Robust front and rear chassis braceso Tall, reinforced chassis side guards with integrated body protectiono Front bumper with optimized impact-absorbing designo Factory-mounted and glued bash-ready tyres on black 7-spoke composite wheelso High-strength chassis center brace systemo Convenient ESC on/off switch holder protects against dirt and moistureo Adjustable, multi-position wheelie baro Durable and stylish printed polycarbonate bodyo Adjustable body mountso Many optional tuning parts availableLength: 485-555mmWidth: 365mmHeight: 210mmWheelbase: 327mmWeight: 4,25kgBattery compartment: 143x50x50mmadditionally you need:- 4S Lipo battery with XT90 connector- battery charger

Roller without electronics!

Length: 590 mmWidth: 455 mmHeight: 219 mmWheelbase: 384 mmWeight: 5400 gMotor: 2050kV 2-6S 4-pole brushless motorSpeed control: Brushless, Waterproof, 3-6S LiPo - Programmable with LiPo Cut-OffServo: Digital - High Voltage - Metal gearbox 25 KgBattery compartment: (LxWxH): 162x50,5x55 mmSpeed: 100+ km/hadditionally neededBatteryCharger

Length: 590 mmWidth: 455 mmHeight: 219 mmWheelbase: 384 mmWeight: 5400 gMotor: 2050kV 2-6S 4-pole brushless motorSpeed control: Brushless, Waterproof, 3-6S LiPo - Programmable with LiPo Cut-OffServo: Digital - High Voltage - Metal gearbox 25 KgBattery compartment: (LxWxH): 162x50,5x55 mmSpeed: 100+ km/hadditionally neededBatteryCharger

Length: 590 mmWidth: 455 mmHeight: 219 mmWheelbase: 384 mmWeight: 5400 gMotor: 2050kV 2-6S 4-pole brushless motorSpeed control: Brushless, Waterproof, 3-6S LiPo - Programmable with LiPo Cut-OffServo: Digital - High Voltage - Metal gearbox 25 KgBattery compartment: (LxWxH): 162x50,5x55 mmSpeed: 100+ km/hadditionally neededBatteryCharger

Length: 590 mmWidth: 455 mmHeight: 219 mmWheelbase: 384 mmWeight: 4725 gMotor: not includedSpeed controller: not includedServo: not includedBattery compartment: (LxWxH): 162x50,5x55 mmSpeed: 100+ km/hadditionally neededRemote controlmotor/controllerServoBatteryCharger

Length: 590 mmWidth: 455 mmHeight: 219 mmWheelbase: 384 mmWeight: 4725 gMotor: not includedSpeed controller: not includedServo: not includedBattery compartment: (LxWxH): 162x50,5x55 mmSpeed: 100+ km/hadditionally neededRemote controlmotor/controllerServoBatteryCharger