Onroad

Features:4WD all wheel drive2.4GHz 4-channel radio system80A brushed speed controller with T-plug540size 15T Motor mit 32.000 U/min @ 7.4V6kg steering servo (25T, ball bearing)4 oil shock absorberBall bearing main driveExtremely durable composite plastic parts Steel differential outdrives Aluminum universal joint drive with steel mountsAdjustable upper track rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish touring car bodyLight-Weight chassis (less weight - longer driving time)Many aluminum option parts availableTechnical Data: Scale: 1:10Dimensions (L/W/H): 470x200x150 mmWeight: 1400gWheelbase: 260mmGround clearance: ca. 15mmTrack width: 170mm front/rearOn-road wheels front/rear: Durchmesser: 65mm / Width: 26mmRally wheels front/rear: Durchmesser: 70mm / Width: 26mmShock-oil: 400CPSDamper installation length: 60mmInternal gear ratio: bevel gear: 13T / ring gear: 38T Motor ratio brushed version: Pinion: 26T / main gear: 58T (module 0.6) Contains: ATC3.4V2 On-Road/Rally Car RTR 2.4GHz CR4S radio systemPlastic clips for shock absorbersStickerManual You need:4x AA batteries for the radio system 7.2V NiMH or 7.4V* LiPo car battery (*recommended)Charger (suitable for car battery)Programming card for individual settings of the speed controller

UNBELIEVABLE POWER - the new Hotshot 3.4BL series is equipped with a powerful brushless electric motor and waterproof electronic speed controller (ESC). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.HIGHLIGHTS:Water-resistant 50A BL Speed Controler (programmable)Powerfull 3300KV BL Motor2.4GHz A.F.H.D.S. Radio SystemFull Aluminum ShocksSteel Motor TransmissionPRODUCT FEATURESTransmission: Forward, Brake & ReverseDrive System: 4 Wheel DriveBall bearing transmissionOil filled adjustable shocksGear differential front/rearAluminum motor mountComplete covered transmissionAdjustable turnbuckles & wishbonesAluminum drive shaftFull printed body2.4GHz radio System Sticker sheet for a unique designA lot tune-up parts available!TECHNICAL SPECIFICATION:Measure (L/W/H): 450x190x140 mmWeight: 1300gWheelbase: 260 mmChassis clearance: 20 mmTire width: 27 mm front / 27 mm rearTire Durchmesser: ± 65 mmShock spring force: medium / Length: 62mm f/rShock oil viscosity: 300 f/rSteel Motor transmission: Pinion 29T / Gear 64TPinion module: 0.6MORE FEATURES:BL Speed Controller (2110007): programmable (brake power, neutral brake, drive mode, punch, V cut-off) / NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 50A cont./300A peak / BEC 6V/3A / Overheat cut-off / Drive function: front/reverse/brake (standard) / Plug system: T-plug (Deans style)Servo (2030003): 4kg steering force / 25T outdrive Motor (2130005): 3421KV / 27.400RPM @ 7.4V / Operating voltage: 4.8 - 11.1V / Size: 540 Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimmingSCOPE OF DELIVERYTouring Car "ATC3.4BL" RTR - brushless version2.4GHz Radio SystemManualSticker SheetREQUIRED ACCESSORIES 2S LiPo Battery 7.4VCharger (LiPo suitable) 4x AA Mignon Batteries for Radio

Our 1/16 touring car combines precision and performance in a compact and affordable model that can be taken anywhere and be ready for fun in no time!This little powerhouse comes ready-to-run with (almost) everything you need to hit the track (only 2* AA batteries for the transmitter are needed). Whether you're racing with your friends in your backyard driveway, on the playground, in the office, or doing wild drifts in your living room, this little "fun maker" leaves nothing to be desired! The chassis, with its powerful engine, all-wheel drive and independent suspension are just a few features that deliver impressive performance. In addition, the aluminum parts such as chassis plate, shock towers and shock absorbers which contribute to excellent rigidity and thus to the ultimate driving experience on smooth surfaces. This high-tech chassis keeps the center of gravity as low as possible to ensure a precise and responsive driving experience. Short and sweet: This little powerhouse lies on the road like a board ! HIGHLIGHTS:Aluminum chassis for excellent handling characteristicsPowered by a powerful 380 brushless motorHigh performance differentials on front and rear axleIndependent suspension for exceptional handlingIntricately designed, multi-piece bodyshellDESIGN:The body with its aggressive design and very detailed shape is made of sturdy material to withstand impacts. It comes with a decal sheet including gluing instructions. Of course, you can also customize your sweetie or get an unpainted body (optional available - item 1610090) for a completely custom look. In addition, the engine dummy for the hood and of course the lighting front and rear complement the design.CHASSIS PERFORMANCE:Bling Bling! Already noble the design with the aluminum parts! Good looking, good performance!Basically, the structure and arrangement of the components is like a 1:10 competition touring car:Independent suspensionCVD front driveshaftsDifferentials with aluminum pinion gears (38Z) and pinion gears (14Z)Differential gears made of polyamide (12Z/24Z)Aluminum drive bones on rear axleChassis, shock towers and upper deck made of aluminum not only give excellent stiffness. Due to the extra weight in contrast to carbon (which is used in high-quality 1:10 on-road chassis), the grip is increased here and thus the performance is increased. If that's not enough, you can treat yourself to fancy aluminum wheels (available as an option - item #ABS-1610092/#ABS-1610093). DRIVE UNIT:a plenty of power for that scale!Driven by a 380 brushless motor with 3300KV and a 30A receiver / speed controller unit with T-high current plug, one is already fast on the road and the insane torque provides for decent drifts! The motor is driven by a 16Z aluminum motor pinion (Mod.0.6 / 2.3mm motor shaft) and a 40Z main gear. If you ever want to change the gear ratio, please remember that the motor shaft has a diameter of 2.3mm. Accordingly, you must pay attention to this when buying the motor pinion. The firing is done by a 1500mAh 7.4V/2S LiPo battery. There is also a matching 20W/800mAh LiPo fast charger includedREMOTE CONTROL & STEERING:A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface! FEATURES:4WD All Wheel Drive2.4GHz remote controlFull ball bearing driveAluminum chassis, upper deck and shock towersAluminum "big bore" shock absorbersCVD axles on front axleHeavy duty front & rear differentialsAluminum propshaftLED lighting front & rearSPECIFICATION:Scale: 1:16Dimensions: (L/W/H): 310x140x80mm)Weight (without battery): 560grWheelbase: 175mmGround clearance: approx. 6mmTrack width: 110mm front / 115mm rearWheels front/rear: Durchmesser: 50mm / Width: 18mmDamper filled: Yes (100CPS)Damper installation length: 38mmINCLUDED:1:16 Touring Car RTR2.4GHz remote control1500mAh LiPo battery800mAh LiPo fast chargerSticker sheet REQUIRED ACCESSORIES:2* AA batteries for remote control

The next addition to our popular Hyper Go series: the Breaker ProDrift-1.4 with top-of-the-range equipment in 1:14 scale. Performance, body and driving characteristics set new standards in the vehicle category of this size. A 2845 3700KV brushless motor is available as the drive, which distributes its power to all four wheels via solid metal drive shafts. The built-in CVD shafts are mounted on ball bearings and ensure backlash-free transmission of power to the high-grip rubber tyres or drift tyres, which are included in the scope of delivery. Also made of metal are the chassis and gears as well as the differentials.For maximum control and fine-tuning of the Hyper Go Breaker ProDrift, adjustable oil-pressure metal shock absorbers, adjustable suspension and a driving stability system (gyro) are also included. The built-in 45A ESC provides sensitive response during acceleration and the built-in LED lighting with different modes also allows for drifts and on-road racing at dusk. The digital 17g steering servo also ensures good cornering control and stable directional stability. Thanks to the 2.4GHz system, operation with several vehicles at the same time is possible.As a small bonus, a Dust Cover (mud flap) is included, which is placed over the entire middle section inside the vehicle to prevent moisture, dirt and mud from penetrating as far as possible. For long driving times with maximum power, a 2000mAh 7.4V Li-Ion battery and a matching charger are included. The driving time is thus up to 12 minutes.HIGHLIGHTS:Maximum durability: thanks to high-quality metal chassis and metal drive components4WD drive with CVD drive shafts: Even better traction and direct power transmission to all wheelsFURTHER FEATURES:RTR version (ready-to-run) incl. remote control, battery, chargerFully ball bearing mounted vehicle for smooth drive performanceLED lightingPolycarbonate chassis dust coverSturdy metal main strut for added rigidityAdjustable metal oil pressure shock absorbersIndividual components consisting of ESC, servo, gyro and servo for easy repair and parts accessibilityAll plastic parts made of composite plastic for better durability TECHNICAL DATA:Scale: 1:14Length: 320mmWidth: 153mm Height: 115mmWeight: 1124g incl. batteryWheelbase: 190mmTrack width front: 128mmTrack width rear: 128mmGround clearance: 15mmFront wheels: Outer diameter/width 58/22mmRear wheels: Outer diameter/width 58/22mmRim diameter: 42mmFront shocks: 65mmRear shocks: 65mmBrake: ElectronicReceiver incl. Gyro function (driving stability system)ESC: 45A brushless Motor: 2845 3700KVDrive system: CardanDrive system: 4WDSteering servo: Digital 17gMain material: Metal / Composite plasticBattery compartment dimensions: 86 x 38 x 32mmBattery: Li-Ion, 2S 7.4V 2000mAh 15C, round cells, Deans connectorBattery dimensions: 70 x 36 x 20mmBattery weight: 99gRide time: 10-12minTop speed: 40-45km/hRemote control: 4-channel, 2.4GHzRange: 100-150mCharger: LiPo chargerSCOPE OF DELIVERY:ModelRemote controlBatteryChargerDrift tyresStreet tyresOff-road tyresGyroAccessoriesREQUIRED ACCESSORIES:2x 1.5V AA batteries for the remote control

Completely assembled model with remote control with 7.2V battery and charger.Brushed Motor

Sport 3 Flux Audi e-tron Vision GTWe are delighted to unveil what is no doubt our most ambitious, detailed and realistic official scale replica partnership yet! When Audi designers pushed themselves to turn a best selling video game car into a reality, HPI's designers followed suit with the dream that this amazing electric race machine could also hit the the real-world track in 1:10th form!Since the dawn of Formula E, electric powered racing has been growing across the motorsport world which is music to our ears as we've been racing with electric power for over 30 years! So what better way to take RC to a generation of sim racers than with the very real, incredibly fast, utterly sublime Sport 3 FLUX Audi e-tron Vision GT!Audi designers first created the "Audi e-tron Vision Gran Turismo” as part of a competition for the popular video game's 15th anniversary. So successful was the virtual car that Audi decided it should be the first concept car of this range to be deployed to real-world race tracks as a fully functional vehicle. Numerous appearances followed, including serving as Race Taxi at Formula E races in 2018.Still as popular as ever in "sim form," this car is enjoyed the world over by countless fans. However in the flesh, the priceless one-of-a-kind car now lives in the Audi Museum in Ingolstadt, only to be driven by a privileged few....Until now!!Under the hood everything is as you would expect with the superb Sport 3 FLUX chassis and its full-time 4WD shaft driven, fully sealed drivetrain, waterproof electronics/radio gear, fully independent double wishbone suspension and adjustable oil-filled shocks.We're confident that when fans swap their gamepads for the 2.4 GHz TF-41 transmitter they will be thrilled at squeezing the trigger and propelling the RS4 Sport 3 to speeds over 113km/h (70mph) thanks to the Flux MMH-4000KV motor and waterproof FLUX EMH-3S LiPo-ready speed controller.OFFICIALLY LICENSED UNIQUE AUDI SPORT REPLICA WHEELSNot only is the e-tron one of our most ambitious and detailed bodies, our designers have captured every last detail, right down to the Quattro emblazoned racing wheels. Wrapped around these beauties is a set of treaded rubber tires for maximum grip on just about every paved surface. You'll get great acceleration, braking and cornering performance from these semi-slick, grippy rubber tires!SPORT 3 FLUX AUDI e-tron VISION GT Features:- Full Time 4WD for maximum control and speed- Sealed shaft drivetrain to prevent damage from debris- Double-wishbone fully adjustable suspension- Oil-filled, fully adjustable, threaded shocks- 4-Gear metal diffs to withstand brushless power- Easy access differentials- Fully equipped with metal-shielded ball bearings for maximum efficiency- Low profile layout design = low CG for enhanced cornering capabilities and overall superior handling- Flux EMH-3S electronic speed controller for total control- Flux MMH-4000 motor for insane power- 3S LiPo capable with a wide variety of compatible batteries- Waterproof electronics- Speeds of up to 70mph (124km/h) when using optional gearing! 1/10th Scale Pre-Assembled 4WD Touring Car with 2.4GHz Radio System and Painted Audi e-tron Vision GT Body SPECIFICATIONS: Length: 431mm (17")Height: 127mm (5")Width: 200mm (7.9")Wheelbase: 254mm (10") Includes: 4 AA batteries What you need: 2S or 3S LiPo pack with T-plugBattery charger for car batteryLiPo Charge Case

1/10th Scale Pre-Assembled 4WD Car with 2.4GHz Radio System and Painted Ford Mustang Mach-E 1400 Body SPECIFICATIONS: Length: 431mmHeight: 127mmWidth: 200mm Includes: 4 AA batteries What you need: 2S or 3S LiPo pack with T-plugcharger

Brushed Motor, complete chassis with RC radioWhat you need:- Battery- Charger- AA Batteries

Brushed Motor, complete chassis with RC radioWhat you need:- Battery- Charger- AA Batteries

FEATURES:New: Spur gear coverNew: Raised front bumperNew: Rally rear diffuserNew: Tredz Stage belted tires on gravel rally wheels4WD shaft driven rally carHigh ground clearance suspension setupFront and rear independent double wishbone suspensionOil-filled aluminum coilover shocks with threaded bodiesPillow ball front & rear suspension uprightsHD front universal drive shafts & axlesHD diff cupsHD shock shaftsHD turnbucklesTough metal 4-gear differentials front, rear and centerProtective spur gear coverDual point bellcrank steering system with integrated servo saverMolded deep tub chassis with hex pattern reinforcementEnclosed receiver box protects from the elementsComplete set of ball bearings17mm aluminum hex hubsPre-cut factory finished bodyshellPlastic molded body side mirrors and dual-level rear racing wingAvailable in two color options4S LiPo capable3674 2250KV brushless motor with 5.0mm shaft120A waterproof ESC15Kg metal gear water-resistant servo2.4GHz radio set with waterproof receiverSpecification:Length: 550mmWidth: 276mmHeight: 179mmItems Required:4 x AA Batteries for transmitter2S to 4S LiPo pack with T-plug

CARTEN M210R EP 1/10 M-CHASSIS KIT Specifications:Drivetrain: 4WD Shaft DrivenTrack Width: 166mmWheelbase: 208-210mmGear Ratio: 1 : 4.56Tire Diameter: 55mm Equipped:Full Ball BearingAluminum Center Driver ShaftSteel CVD Drive ShaftsAluminium 12mm Hex HubFull TurnbuckleAluminum Spur Gear HubCarbon Fibre ChassisAluminium Oil ShocksAluminum Motor MountMetal Gear DifferentialIncludes:KitWheels and TiresRequired Equipment:ElectronicsBody Shell

The Carten M210 1/10 4WD Rally Car was RTR set and comes with 2.4GHz Radio System, 60A Waterproof ESC, and 23T Brushed Motor. The 7075 chassis and 68T Heavy Duty Steel Spur Gear allowed to drive fiercely. The body shell has been painted with white color and cut already ! Just get and have fun!Battery and Charger are not included.Max. battery dimensions: 47 mm wide and 90-139 mm long, Lipo, Shorty 7.4 V or 7.2 V NiMh

M210 FWD - CARTEN M210 FWD 1:10 EP M-CHASSISSpecificationDrivetrain: Shaft Drive/ FWDTrack Width: 166mmWheelbase: 210/225/239mm OptionFinal Gear Ratio: 2.47(42/17)Spur & Pinion Gear: 72/39Tire Diameter: 55mm AccessoriesFull Bearing Alu Spur Gear HubSteel CVD Driver Shaft Alu ShocksComposite Fibre Chassis, Upper Deck,Shock Tower Metal gear DifferentialAlu Floating Servo Mount Full turnbuckleAlu Motor Monut

Diese verbesserte Version des TT-02 Chassis enthält eine Fülle von Tuningteilen und einige neue Teile, um es rennfähig zu machen.Die enthaltenen Rennteile verbessern die Radaufhängung, die Motorhalterung, die Antriebswellen, die Differentialausgänge usw.. Dabei enthält die Radaufhängung Metallteile und CVA Öldämpfer. Die Vielseitigkeit und das einfache Fahrverhalten des TT-02 bleiben erhalten.Enthaltene Tuningteile:Neu entwickelte hintere Achsträger aus Aluminium mit 3 Grad VorspurAluminium Motorhalter53159 4mm Aluminum Flange Lock Nut (Blue)53642 5mmAluminum Ball Connector (Blue)54247 3x18mm Aluminum Turnbuckle Shaft (Blue) x254500 TT-02 High-Speed Gear Set (68T)54501 TT-02 Aluminum Propeller Shaft54502 TT-02 Aluminum Propeller JointUber das Modell- RC-Bausatz im Maßstab 1:10- Neu entwickelte hintere Achsträger mit 3 Grad Vorspur bieten größere Stabilität in der Kurve.- Besserer Leichtlauf durch Aluminiumwelle mit Achsaufnahmen.- CVA Öldämpfer in Silber erstmals bei diesem Modell. Es werden schwarze Federn verwendet.- Modische 10-Speichenfelgen sind enthalten.- Bitte beachten Sie, dass Karosserie, Akku, Motor und RC Ausrüstung nicht enthalten sind.

This Tamiya R/C car recreates a classic Audi A4 Quattro Touring car as it raced in 1997. In the late 1990s, manufacturer-backed teams would come to dominate touring car series around the world. One of the most pre-eminent was Audi, which spared no expense in its pursuit of the top of the podium. Using its base A4 quattro as a platform, Audi developed the car significantly and turned it into a race winner. In addition, Audi sought the best drivers from around the world in order to do their creation justice.Tamiya recreates this racer on top of the TT-01 E chassis, which is ideal for beginner kit builders. The original release of this Audi was mounted on the Tamiya TA-03 machine.TT-01 E ChassisThe bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with metal plated wheels developed just for this model; the high sidewalls make for forgiving turns.- 1/10 scale R/C model assembly kit. Length: 454mm, width: 186mm.- Polycarbonate body.- Separate molded parts recreate side mirrors and sporty rear wing.- Stickers are included to recreate markings for both no.5 and no.45 cars (they raced in different touring car series), with masking stickers to help during the paint job.- 18-spoke wheels are molded in Silver, and paired with slick tires.- The TT-01 Type-E chassis features shaft-driven 4WD for easy handling, and great customizability.- A wide range of option parts is available to tune the TT-01 Type-E chassis.- Requires: 2-channel radio, servo, 7.2-7.4volt battery & compatible battery charger, and Tamiya PS paint.

Required accessories:Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger.Scope of delivery:Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body painted body.

Tamiya Mercedes-Benz C11 1990 Gr.C 2WD (300047484) The Mercedes-Benz C11 1990 Gr.C in 1:10 scale is a highly detailed RC kit from Tamiya. Based on the robust Group-C chassis, this model brings the elegance and performance of a legendary endurance race car to your home track. Features: Unpainted polycarbonate body of the Mercedes-Benz C11 Durable Group-C chassis with ABS plastic tub 2WD rear-wheel drive for high agility Foam tires for optimal traction Ball differential for smooth power distribution RS-540 electric motor included Contents: Mercedes-Benz C11 kit with robust Group-C chassis Unpainted body RS-540 electric motor Detailed, illustrated assembly manual Required Accessories: 2-channel radio control system Steering servo Electronic speed controller 7.2V NiMH or 2S LiPo battery Charger Paints for body decoration

Tamiya welcomes this limited edition version of Item 58718 Toyota Celica GT-Four (ST165) (TT-02) with pre-painted, pre-cut body, pre-cut wheel arches, and pre-made body mount holes, which is great for not only beginners but also veterans.4WD assembly kit, TT-02 Chassis,ESC included, Type 540 Torque-Tuned Motor, prepainted Polycarbonat-body,shaft driven, user guideDétails- This is a 1/10 scale R/C model assembly kit. Length: 450mm, width: 185mm, height: 130mm. Wheelbase: 257mm.- The lightweight, durable 1.0mm thick polycarbonate body realistically captures the sleek form in style.- The kit is based upon the shaft-driven 4WD TT-02 chassis which gives great adaptability with various kinds of setups.- Rally dish wheels molded in white are paired with tread pattern racing radial tires.- Comes with stickers and masking stickers for use in the paint job.- Please note that body requires cutting out, application of stickers, and other work.

The Integrale will also be available on Tamiya's versatile new TT-02 chassis, which is suited to a wide range of drivers' abilities.About the Model• This is a 1/10 scale R/C assembly kit.• Kit includes FREE BONUS PARTS (Item 53156 Hard Inner Sponge Set) which are for EXPORT ONLY and are subject to the FIRST PRODUCTION.• The model's polycarbonate body accurately recreates that of the real rally car.• The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis.• A wide range of option parts are becoming available to tune and customize TT-02 chassis machines.• The kit includes decorative and masking stickers.• Rally Block tires are fitted to stylish white wheels.• Type 540 Motor included.Technical details:- TT-02 tub frame chassis- 4WD all-wheel drive- central drive shaft- Cone differential f/r with four bevel gears- double wishbones f/r- Toe adjustable front- Independent wheel suspension with friction dampers- electronic speed controller- Electric motor type 540 with air cooling- Motor mount compatible with electric motors type 380- Battery compartment suitable for all battery types- Gear ratio adjustable in 10 steps- robust and detailed polycarbonate body (unpainted)- separate injection molded mirrors and rear spoiler- Variable wheelbase: normal 258 mm (257) mm/short 252 mm- Rally block tread tyres- Decal sheet and painting aids (window masking film) includedTechnical specifications:1:10 scaleLength 407mmWidth 186mmHeight 159mmWheelbase 257mm

The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine.Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving.Includes full ball bearings and CVA (oil-filled) Super Mini shocks.Tamiya Sport-Tuned Motor and Aluminum heat sink is included.Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts.The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios.The skid-shaped underside of the bathtub type frame minimizes contact with the road surface.Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis.Technical details:- TT-02D tub frame chassis- 4WD all-wheel drive- central drive shaft- Cone differential f/r with four bevel gears- double wishbones f/r- completely ball-bearing- Track adjustable, front- Independent suspension- CVA Mini oil pressure shock absorbers (Super Mini)- Electric motor type RS-540 Sport Tuned- Aluminum radiator- Battery compartment suitable for all battery types- Gear ratio adjustable in 10 steps- Variable wheelbase: normal 258 mm (257) mm/short 252 mmTechnical specifications:1:10 scaleLength 376mmWidth approx. 182mmWheelbase 257mmScope of delivery:Kit model with detailed illustrated assembly instructions

Der Mercedes-Benz 190E in der Version "debis" fuhr in den 90er Jahren in der deutschen DTM Rennserie.Das TAMIYA-Modell im Maßstab 1:10 auf dem TT-01E Chassis hat einen kräftigen Torque-Tuned Elektromotor und Allradantrieb. Diese Kombination sorgt für schnellen und unkomplizierten Fahrspaß. Die robuste und detailgetreue Polykarbonatkarosserie samt Dekorbogen sowie der elektronische Fahrregler TBLE-02S sind perfekt für RC-Hobbyisten geeignet.Technische Details:- Bausatzmodell- Maßstab 1:10- TT-01 Type E Chassis- 4WD Allradantrieb über Kardanwelle- Einzelradaufhängung vorne/hinten- 4fach Federbeine- Abmessungen: Länge 445 mm, Breite 184 mm- Radstand 257 mm- Super detaillierte Polycarbonat-Karosserie (Transparent) mit Anbauteilen- Mercedes-Benz-Stern und Kühlergrill aus verchromten Kunststoff- Heckspoiler und Spiegel aus Kunststoff detailgetreu nachgebildet- 6-Speichenfelgen mit 26 mm Slick-Reifen- TAMIYA Torque Tuned Motor enthalten- Elektronischer Fahrtregler für Bürsten/Brushed und BrushlessmotorenLieferumfang:Bausatzmodell mit ausführlich bebilderter Aufbauanleitung, Elektronischer brushless/brushed Fahrtenregler TBLE-02S, 540er Elektromotor, Polycarbonatkarosserie

Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 has been designed and engineered jointly by Ford Performance and Multimatic Motorsports to compete in sports car championship racing series globally, including the IMSA Continental Tire SportsCar Challenge, Pirelli World Challenge GTS/GT4, and GT4 European Series.The Tamiya Ford GT4 faithfully captures this sleek racing car as a 1/10 scale radio control replica. The highly-detailed polycarbonate body sits atop the easy-to-build Tamiya TT-02 chassis that you can customize for added performance!TT-02 Chassis:The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.• 1/10 scale R/C model assembly kit. Length: 459mm.• Polycarbonate body was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate.• Wheel arches are pre-cut out for a simpler body assembly experience.• The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis.• Separately molded plastic components depict rear wing and side mirrors.• Racy 10-spoke wheels are molded in gun metal and paired with slick tires.• Stickers are included to create an original livery, as are masking stickers for use when painting.• Includes Tamiya Torque Tuned Motor.• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit.• Requires: 2-Channel Radio, servo, 7.2-7.4volt battery pack & compatible charger, and Tamiya PS paint.

The long-running and popular M-Chassis series welcomes a new member with the M-08 Concept chassis, which employs a midship motor, rear-wheel drive layout for superior rear traction, plus a main frame split into front and rear sections.About the Model• This is a 1/10 scale R/C model assembly kit.• The chassis is split into front (suspension and servo) and rear (motor and battery) sections. It can be assembled into three different wheelbases: S (210mm), M (225mm) or L (239mm).• Rear-midship motor powers rear wheels via a differential in the MR setup.• Oil-filled differential gear is the TA06 design, which was also employed on the M-07 Concept chassis.• Features proven M-07 Concept designs: suspension arms, uprights, suspension mounts and aluminum parts.• Includes CVA oil dampers, universal drive shafts, full ball bearings and hi-torque servo saver.• Comes with new front suspension mounts (0 degrees) and hub carriers (2 degrees) for a total caster angle of 2 degrees, and smooth cornering.• Compatible with M-06 Chassis bodies.• Compatible with M-07 Concept Hop-Up Option parts such as Aluminum Rear Suspension Mount (Skid Angle Adjustment) (54787), Aluminum Rear Uprights (54781) and Low-Friction King Pin Pipes (54813).Warning! Not suitable for children under 14 years.

Tamiya is delighted to welcome the 1992 Audi V8 Touring as a model on our popular TT-02 chassis. The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi's famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring.About the Model• This is a 1/10 R/C model assembly kit. Length: 463mm, width: 188mm, height: 138mm. Wheelbase: 257mm.• The powerful, imposing body is molded accurately in lightweight and durable polycarbonate (clear). • Stickers are included to recreate the markings for the 1992 Audi V8 Touring. Masking stickers will aid in the paint job.• Two-piece mesh wheels have silver color rims and spokes. They are paired with racing slick tires.• Separate parts are included to depict side mirrors.• The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly.• 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride.• A wealth of Hop-Up Option parts is available to tune the TT-02 chassis to your needsScope of delivery:Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body