A remote control car as a gift
we offer a variety of different models for small and large. We have a suitable car for almost every area in the assortment.
Let us inspire you a little...
If you have any questions, we are always at your disposal! eMail: service@rc-race-shop.de
Small models for the start
1:10 Modelle - fertig montiert
The new 80A brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully utilise the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item no. 2110061) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 540 15T brushed motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. Thanks to the higher output of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - regardless of the C-rate and capacity. 4 oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun is guaranteed. A servo with 15kg actuating force and metal gearing handles the steering commands.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that settings can be made easily using levers and rotary knobs. In addition, the remote control has a "beginner mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have much experience in handling such RC vehicles.Highlights:4WD all-wheel drive2.4 GHz 4-channel radio system80A brushed speed controller with T-plug540 15T motor with 32,000 rpm @ 7.4V15kg steering servo with metal gears (25T, ball bearings)4 oil shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish truggy body with plastic add-on parts"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:Scale 1:10Dimensions (L/W/H): 405x325x165 mmWeight: 1740gWheelbase: 270mmGround clearance: approx. 35mmTrack width: 270mm front/rearWheels front/rear: Durchmesser: 105mm / width: 55mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmEngine gear ratio: Pinion: 18T / main gear: 64T (module 0.6) Scope of delivery:1/10 Truggy "AT3.4V2" RTR2.4GHz "CR4S" remote controlSticker sheetinstruction manualadditionally required:4x AA batteries for remote control7.2V NiMH or 7.4V* LiPo drive battery (*recommended)Charger (suitable for the drive battery)Programming card for individual settings of the speed controller
Highlights:Scale 1:10Steel drive shaftsSpeed adjustment via remote control (High/Low)4WD2 electric drive motors6 shock absorbersOverheating protectionIPX4 splash water protectedproportional throttle and steering controlmassive front bumpereasy to steerReady-to-Run (RTR)forward - backward - right - leftrubber tyres with insertsfully sprung chassisextremely resilient, soft suspensionBall bearing drive46 mm high ground clearanceanodised aluminium axle pin holders v+hanodised aluminium front shock towersTop speed 45 km/h2.4 GHz remote controlIndoor/OutdoorScope of delivery:Sprint Truck 1:102.4 GHz remote controlUSB charging cableVehicle battery Lipo 7.4V 1600mAh3x AA batteries for the remote controlTechnical data:Dimensions: 345 x 305 x 165 mmScale: 1:10Battery: Lipo 7,4V 1600mAhWeight RTR: ~ 1705 gDriving time: ~ 10-15 min.Charging time: ~ 90-120 min.
Highlights:Scale 1:10Steel drive shaftsSpeed adjustment via remote control (High/Low)4WD2 electric drive motors6 shock absorbersOverheating protectionIPX4 splash water protectedproportional throttle and steering controlmassive front bumpereasy to steerReady-to-Run (RTR)forward - backward - right - leftrubber tyres with insertsfully sprung chassisextremely resilient, soft suspensionBall bearing drive46 mm high ground clearanceanodised aluminium axle pin holders v+hanodised aluminium front shock towersTop speed 45 km/h2.4 GHz remote controlIndoor/OutdoorScope of delivery:Sprint Truck 1:102.4 GHz remote controlUSB charging cableVehicle battery Lipo 7.4V 1600mAh3x AA batteries for the remote controlTechnical data:Dimensions: 345 x 305 x 165 mmScale: 1:10Battery: Lipo 7,4V 1600mAhWeight RTR: ~ 1705 gDriving time: ~ 10-15 min.Charging time: ~ 90-120 min.
Die Modelle im Maßstab 1:10 eignen sich gut für den Einsatz im Gelände. Die Modelle unterscheiden sich zum einen durch Ihren Typ und zum anderen durch die verbaute Elektronik. Buggys sind etwas flacher und somit mehr in der Lage, Kurven schnell zu fahren. Durch die geringe Bodenfreiheit können sie aber dafür nicht im groben Gelände gefahren werden. Im Gegensatz dazu sind Monster Trucks auch im groben Gelände fahrbar, dafür kippen sie aufgrund des hohen Schwerpunkts leichter in den Kurven.
Die Elektronik unterscheidet sich zwischen Brushed und Brushless. Einfach gesprochen sind Brushed Modelle etwas langsamer und können mit NiMh Akkus gefahren werden. Die Modelle sind günstiger in der Anschaffung, dafür verschleißen die Motoren aber mit der Zeit und müssen ausgetauscht werden.
Die Brushless Modelle sind schneller und verschleißen bei entsprechender Pflege und Wartung nicht. Dafür brauchen sie aber in der Regel immer einen Lipo Akku mit einem dazu passenden Ladegerät.
Bei den oben aufgeführten Modellen sind Akku und Ladegerät meistens mit enthalten!
1:10 Modelle - Bausätze Tourenwagen
Scope of delivery:Kit model with detailed illustrated assembly instructionsElectronic speed controller540 electric motorBody clearRequired accessories: Remote control with receiverSteering servo7.2V NiMH battery packbattery charger
Sie möchten ein Ferngesteuertes Auto selbst zusammenbauen?
Die Modelle von Tamiya bieten hier den perfekten Einstieg. Die Modelle werden mit einer ausführlichen Anleitung geliefert, sodass der Zusammenbau auch für Anfänger kein Problem darstellt.
Die Bausätze werden in der Regel ohne Elektronik geliefert. Sollten Sie auch die Elektronik zu dem Modell benötigen, bietet dieses Set alles notwendige für den Start.
Die Karosserien sind bei den Bausätzen, bis auf wenige Ausnahmen nicht lackiert. Mit der passenden Lexanfarbe werden die Karosserien von innen lackiert, sodass Sie sich Ihr Modell selbst gestalten können.
1:10 Modelle - Bausätze Offroad
A Fighter, and a Winner!The 2WD buggy The Frog will be a model familiar to many who joined in the first R/C boom of the 1980s. Now, it serves as the inspiration for this new model, the Neo Fighter Buggy. At home both on- and off-road, this 2WD buggy features a lightweight yet tough monocoque frame that protects vital equipment such as the servo and battery from damage; its long form also offers great stability. Coupled with friction dampers and 4-wheel double wishbone suspension, it means the Neo Fighter Buggy performs well even on difficult off-road surfaces. Such a combination of hassle-free assembly and high-performance, light-on-its-feet handling is sure to recommend this model not only to fans of the past, but also to the next generation of R/C racers!DT-03 Chassis: Great Fun, Minimum FussThe stylish slimline form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to friction dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.Specifications- Length: 400mm, Width: 248mm, Height: 132mm - Wheelbase: 287mm - Tread (Front/ Rear): 221mm/208mm - Tire Width/Diameter: 27/80mm (Front), 41/86mm (Rear) - Monocoque Frame - Rear Wheel 2WD - 3-Bevel Differentials - 2-Piece Steering Tie-Rod - Front & Rear Double Wishbone Suspension - Gear Ratio = 9.28:1 - Type 540 Motor - Requires electronic speed controller (sold separately)Separately Required Items- 2-Channel R/C Unit with ESC- - Battery Pack & Charger - R6/AA/UM3 batteries for transmitter
Are you ready to build a beast ground up part by part with your bare hands? Not wanting to drive it today and looking for a cheaper alternative? Great value added with motor and servo included in box! You found it! The Official PUBG Buggy is in KIT form!!!Build this awesome vehicle the way you like and get it ready to slash around terrain to ambush your enemy and go after Buggies, Pick Up's and Military Vehicles. Epic journeys await!FEATURESUnique Off-road Buggy DesignGenuine official PUBG Buggy with internal & driver details2wd drivetrain with high impact steel dog bones.Modular Tough Tub Chassis with under carry battery traySturdy Roll Cage w/ mounting chairsUnique front-lay shock tower systemAdjustable ShocksDirect Drive Brushed Motor system33:97:1 3-Gear TransmissionChassis mounted steering servoAll metal shield ball bearing setNEEDED TO COMPLETELi-ion 850mAh BATTERYBRUSHED WATERPROOF ESC2.4G RADIO SET
You want to assemble a remote controlled buggy yourself?
The models from Tamiya and Absima offer the perfect start here. The models are supplied with detailed instructions, so that assembly is no problem even for beginners.
The kits are usually delivered without electronics. Should you also need the electronics to the model, this set offers everything necessary for the start.