Onroad RC Cars – Performance Models for Smooth Surfaces
Speed, control and performance – our Onroad RC Cars are perfect for pavement, racing tracks and drifting fun!
1:10 Touring/Rally Car ATC3.4V2 4WD RTR
Features:4WD all wheel drive2.4GHz 4-channel radio system80A brushed speed controller with T-plug540size 15T Motor mit 32.000 U/min @ 7.4V6kg steering servo (25T, ball bearing)4 oil shock absorberBall bearing main driveExtremely durable composite plastic parts Steel differential outdrives Aluminum universal joint drive with steel mountsAdjustable upper track rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish touring car bodyLight-Weight chassis (less weight - longer driving time)Many aluminum option parts availableTechnical Data: Scale: 1:10Dimensions (L/W/H): 470x200x150 mmWeight: 1400gWheelbase: 260mmGround clearance: ca. 15mmTrack width: 170mm front/rearOn-road wheels front/rear: Durchmesser: 65mm / Width: 26mmRally wheels front/rear: Durchmesser: 70mm / Width: 26mmShock-oil: 400CPSDamper installation length: 60mmInternal gear ratio: bevel gear: 13T / ring gear: 38T Motor ratio brushed version: Pinion: 26T / main gear: 58T (module 0.6) Contains: ATC3.4V2 On-Road/Rally Car RTR 2.4GHz CR4S radio systemPlastic clips for shock absorbersStickerManual You need:4x AA batteries for the radio system 7.2V NiMH or 7.4V* LiPo car battery (*recommended)Charger (suitable for car battery)Programming card for individual settings of the speed controller
1:10 Touring Car ATC 3.4 BL 4WD Brushless RTR
UNBELIEVABLE POWER - the new Hotshot 3.4BL series is equipped with a powerful brushless electric motor and waterproof electronic speed controller (ESC). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.HIGHLIGHTS:Water-resistant 50A BL Speed Controler (programmable)Powerfull 3300KV BL Motor2.4GHz A.F.H.D.S. Radio SystemFull Aluminum ShocksSteel Motor TransmissionPRODUCT FEATURESTransmission: Forward, Brake & ReverseDrive System: 4 Wheel DriveBall bearing transmissionOil filled adjustable shocksGear differential front/rearAluminum motor mountComplete covered transmissionAdjustable turnbuckles & wishbonesAluminum drive shaftFull printed body2.4GHz radio System Sticker sheet for a unique designA lot tune-up parts available!TECHNICAL SPECIFICATION:Measure (L/W/H): 450x190x140 mmWeight: 1300gWheelbase: 260 mmChassis clearance: 20 mmTire width: 27 mm front / 27 mm rearTire Durchmesser: ± 65 mmShock spring force: medium / Length: 62mm f/rShock oil viscosity: 300 f/rSteel Motor transmission: Pinion 29T / Gear 64TPinion module: 0.6MORE FEATURES:BL Speed Controller (2110007): programmable (brake power, neutral brake, drive mode, punch, V cut-off) / NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 50A cont./300A peak / BEC 6V/3A / Overheat cut-off / Drive function: front/reverse/brake (standard) / Plug system: T-plug (Deans style)Servo (2030003): 4kg steering force / 25T outdrive Motor (2130005): 3421KV / 27.400RPM @ 7.4V / Operating voltage: 4.8 - 11.1V / Size: 540 Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimmingSCOPE OF DELIVERYTouring Car "ATC3.4BL" RTR - brushless version2.4GHz Radio SystemManualSticker SheetREQUIRED ACCESSORIES 2S LiPo Battery 7.4VCharger (LiPo suitable) 4x AA Mignon Batteries for Radio
1:14 Hyper GO Breaker ProDrift 4WD Brushless GPS
The next addition to our popular Hyper Go series: the Breaker ProDrift-1.4 with top-of-the-range equipment in 1:14 scale. Performance, body and driving characteristics set new standards in the vehicle category of this size. A 2845 3700KV brushless motor is available as the drive, which distributes its power to all four wheels via solid metal drive shafts. The built-in CVD shafts are mounted on ball bearings and ensure backlash-free transmission of power to the high-grip rubber tyres or drift tyres, which are included in the scope of delivery. Also made of metal are the chassis and gears as well as the differentials.For maximum control and fine-tuning of the Hyper Go Breaker ProDrift, adjustable oil-pressure metal shock absorbers, adjustable suspension and a driving stability system (gyro) are also included. The built-in 45A ESC provides sensitive response during acceleration and the built-in LED lighting with different modes also allows for drifts and on-road racing at dusk. The digital 17g steering servo also ensures good cornering control and stable directional stability. Thanks to the 2.4GHz system, operation with several vehicles at the same time is possible.As a small bonus, a Dust Cover (mud flap) is included, which is placed over the entire middle section inside the vehicle to prevent moisture, dirt and mud from penetrating as far as possible. For long driving times with maximum power, a 2000mAh 7.4V Li-Ion battery and a matching charger are included. The driving time is thus up to 12 minutes.HIGHLIGHTS:Maximum durability: thanks to high-quality metal chassis and metal drive components4WD drive with CVD drive shafts: Even better traction and direct power transmission to all wheelsFURTHER FEATURES:RTR version (ready-to-run) incl. remote control, battery, chargerFully ball bearing mounted vehicle for smooth drive performanceLED lightingPolycarbonate chassis dust coverSturdy metal main strut for added rigidityAdjustable metal oil pressure shock absorbersIndividual components consisting of ESC, servo, gyro and servo for easy repair and parts accessibilityAll plastic parts made of composite plastic for better durability TECHNICAL DATA:Scale: 1:14Length: 320mmWidth: 153mm Height: 115mmWeight: 1124g incl. batteryWheelbase: 190mmTrack width front: 128mmTrack width rear: 128mmGround clearance: 15mmFront wheels: Outer diameter/width 58/22mmRear wheels: Outer diameter/width 58/22mmRim diameter: 42mmFront shocks: 65mmRear shocks: 65mmBrake: ElectronicReceiver incl. Gyro function (driving stability system)ESC: 45A brushless Motor: 2845 3700KVDrive system: CardanDrive system: 4WDSteering servo: Digital 17gMain material: Metal / Composite plasticBattery compartment dimensions: 86 x 38 x 32mmBattery: Li-Ion, 2S 7.4V 2000mAh 15C, round cells, Deans connectorBattery dimensions: 70 x 36 x 20mmBattery weight: 99gRide time: 10-12minTop speed: 40-45km/hRemote control: 4-channel, 2.4GHzRange: 100-150mCharger: LiPo chargerSCOPE OF DELIVERY:ModelRemote controlBatteryChargerDrift tyresStreet tyresOff-road tyresGyroAccessoriesREQUIRED ACCESSORIES:2x 1.5V AA batteries for the remote control
Citroen C3 WRC Rally RTR 1:14 Hyper Go
Hyper Go Citroën C3 WRC Rally/Drift 4WD 1:14 RTR The Hyper Go Citroën C3 WRC 1:14 RTR is a highly detailed RC model designed for rally and drift enthusiasts. Featuring a powerful brushless motor, durable metal components, and modern features such as LED lighting and gyro stabilization, this vehicle is perfect for thrilling drives on various surfaces. Features: Realistic replica of the Citroën C3 WRC 4WD drivetrain for optimal traction Powerful 2845 3700KV brushless motor Durable metal differentials and ball-bearing drivetrain Aluminum oil-filled shock absorbers for excellent suspension LED headlights and taillights Built-in gyro system for stable drifts Includes extra drift tires Contents: Ready-to-run Citroën C3 WRC RC model 2.4 GHz radio control system 7.4V 2000mAh Li-Ion battery Charger Additional drift tires Dust cover User manual Required Accessories: Two 1.5V AA batteries for the transmitter Technical Specifications: Scale: 1:14 Drivetrain: 4WD Motor: 2845 3700KV brushless Shock absorbers: Aluminum, oil-filled Battery type: 7.4V 2000mAh Li-Ion Radio control: 2.4 GHz Run time: Up to 15 minutes Charging time: Approx. 2 hours
Hyper Go Lancia Delta HF Integrale Rallye Drift 4WD 1:14 RTR
Hyper Go Lancia Delta HF Integrale Rallye Drift 4WD 1:14 RTRLicensed Lancia Delta HF Integrale rally body in 1:14 scalePowerful brushless motor for high speed performance4WD all-wheel-drive system for precise control on tarmac, gravel and driftIntegrated gyro system for stabilized drifting and easy handlingCompact RTR set – ready to run with radio, battery and charger included
Hyper Go Citroen C3 WRC Rally Brushless 4WD 1:7 ARTR
Hyper Go Citroen C3 WRC Rally Brushless 4WD 1:7 ARTROfficially licensed Citroen C3 WRC rally body in 1:7 scalePowerful brushless system reaching speeds over 65 km/h4WD drivetrain with gyro for maximum control at high speed and driftingARTR version – almost ready to run, requires separate radio and receiverPerfect for rally and on-road racing, highly detailed scale appearance
Team Corally SSX-125 Car Kit 7075 Edition Chassis Kit Only
Team Corally SSX-125 7075 Edition 1/12 Pan Car Kit7075 aluminum chassis – ultra-light and extremely rigid1/12 competition pan car kit for top-level racing performancePrecision components with optimized suspension geometryVery low center of gravity design for maximum cornering stabilityKit version without electronics – choose your own motor, servo and ESC
Team Corally SSX-125 Car Kit Carbon Edition Chassis Kit Only
Team Corally SSX-125 Carbon Edition 1/12 Pan Car KitCarbon chassis – ultra-lightweight and highly durable1/12 competition pan car kit for maximum racing performanceOptimized suspension geometry for precise handlingLow center of gravity for excellent cornering stabilityKit version without electronics – allows full customization
1:10 RS4 Sport 3 1987 Warsteiner BMW E30 RTR
Completely assembled model with remote control with 7.2V battery and charger.Brushed Motor
1:10 Sport3 Flux Audi e-tron Vision GT RTR
Sport 3 Flux Audi e-tron Vision GTWe are delighted to unveil what is no doubt our most ambitious, detailed and realistic official scale replica partnership yet! When Audi designers pushed themselves to turn a best selling video game car into a reality, HPI's designers followed suit with the dream that this amazing electric race machine could also hit the the real-world track in 1:10th form!Since the dawn of Formula E, electric powered racing has been growing across the motorsport world which is music to our ears as we've been racing with electric power for over 30 years! So what better way to take RC to a generation of sim racers than with the very real, incredibly fast, utterly sublime Sport 3 FLUX Audi e-tron Vision GT!Audi designers first created the "Audi e-tron Vision Gran Turismo” as part of a competition for the popular video game's 15th anniversary. So successful was the virtual car that Audi decided it should be the first concept car of this range to be deployed to real-world race tracks as a fully functional vehicle. Numerous appearances followed, including serving as Race Taxi at Formula E races in 2018.Still as popular as ever in "sim form," this car is enjoyed the world over by countless fans. However in the flesh, the priceless one-of-a-kind car now lives in the Audi Museum in Ingolstadt, only to be driven by a privileged few....Until now!!Under the hood everything is as you would expect with the superb Sport 3 FLUX chassis and its full-time 4WD shaft driven, fully sealed drivetrain, waterproof electronics/radio gear, fully independent double wishbone suspension and adjustable oil-filled shocks.We're confident that when fans swap their gamepads for the 2.4 GHz TF-41 transmitter they will be thrilled at squeezing the trigger and propelling the RS4 Sport 3 to speeds over 113km/h (70mph) thanks to the Flux MMH-4000KV motor and waterproof FLUX EMH-3S LiPo-ready speed controller.OFFICIALLY LICENSED UNIQUE AUDI SPORT REPLICA WHEELSNot only is the e-tron one of our most ambitious and detailed bodies, our designers have captured every last detail, right down to the Quattro emblazoned racing wheels. Wrapped around these beauties is a set of treaded rubber tires for maximum grip on just about every paved surface. You'll get great acceleration, braking and cornering performance from these semi-slick, grippy rubber tires!SPORT 3 FLUX AUDI e-tron VISION GT Features:- Full Time 4WD for maximum control and speed- Sealed shaft drivetrain to prevent damage from debris- Double-wishbone fully adjustable suspension- Oil-filled, fully adjustable, threaded shocks- 4-Gear metal diffs to withstand brushless power- Easy access differentials- Fully equipped with metal-shielded ball bearings for maximum efficiency- Low profile layout design = low CG for enhanced cornering capabilities and overall superior handling- Flux EMH-3S electronic speed controller for total control- Flux MMH-4000 motor for insane power- 3S LiPo capable with a wide variety of compatible batteries- Waterproof electronics- Speeds of up to 70mph (124km/h) when using optional gearing! 1/10th Scale Pre-Assembled 4WD Touring Car with 2.4GHz Radio System and Painted Audi e-tron Vision GT Body SPECIFICATIONS: Length: 431mm (17")Height: 127mm (5")Width: 200mm (7.9")Wheelbase: 254mm (10") Includes: 4 AA batteries What you need: 2S or 3S LiPo pack with T-plugBattery charger for car batteryLiPo Charge Case
1:10 Sport 3 Flux Mustang Mach-E RTR
1/10th Scale Pre-Assembled 4WD Car with 2.4GHz Radio System and Painted Ford Mustang Mach-E 1400 Body SPECIFICATIONS: Length: 431mmHeight: 127mmWidth: 200mm Includes: 4 AA batteries What you need: 2S or 3S LiPo pack with T-plugcharger
1:10 Subaru Impreza WRC 2006 Fazer MK2 RTR
Brushed Motor, complete chassis with RC radioWhat you need:- Battery- Charger- AA Batteries
1:10 Toyota Tundra TRD Pro Street Fazer MK2 RTR
Brushed Motor, complete chassis with RC radioWhat you need:- Battery- Charger- AA Batteries
M210 1:10 M-Chassis Kit
CARTEN M210 is the entry-level model in the M-chassis class. Already equipped with numerous racing parts, the M210 is suitable for both beginners and hobby pilots.M-chassis vehicle with an excellent price-performance ratio.• Fully ball-bearing• Aluminum central cardan shaft• Steel CVD drive shafts• Aluminum gear drivers• Carbon fiber chassis, upper deck, shock absorber plate• Oil pressure shock absorbers• Aluminum motor bracket• Ball differentialsDrivetrain Shaft Drive 4WDTrack Width 166mmWheelbase 208-210mmFinal Gear Ratio 2.35Gear Ratio 5.46Tire Diameter 55mm
1:10 M210-Rally 4WD M-Chassis RTR
The Carten M210 1/10 4WD Rally Car was RTR set and comes with 2.4GHz Radio System, 60A Waterproof ESC, and 23T Brushed Motor. The 7075 chassis and 68T Heavy Duty Steel Spur Gear allowed to drive fiercely. The body shell has been painted with white color and cut already ! Just get and have fun!Battery and Charger are not included.Max. battery dimensions: 47 mm wide and 90-139 mm long, Lipo, Shorty 7.4 V or 7.2 V NiMh
1:10 M210R+ M-Chassis Kit
CARTEN M210R+ EP 1/10 M-CHASSIS KIT Specifications:- Drivetrain: 4WD Shaft Driven- Track Width: 166mm- Wheelbase: 208-210mm- Gear Ratio: 1 : 4.56- Tire Diameter: 55mmEquipped:- Full Ball Bearing- Aluminum Center Driver Shaft- Steel CVD Drive Shafts- Aluminium 12mm Hex Hub- Full Turnbuckle- Aluminum Spur Gear Hub- Carbon Fibre Chassis- Aluminium Oil Shocks- Aluminum Motor Mount- Aluminium Pivot Blocks front and rear- Metall Gear Differential rear- Spool front- Sway Bar Kit front and rear Includes:- Kit - Wheels and TiresRequired Equipment:- Electronics - Body Shell
M210FWD 1:10 M-Chassis 210 mm Kit
M210 FWD - CARTEN M210 FWD 1:10 EP M-CHASSISSpecificationDrivetrain: Shaft Drive/ FWDTrack Width: 166mmWheelbase: 210/225/239mm OptionFinal Gear Ratio: 2.47(42/17)Spur & Pinion Gear: 72/39Tire Diameter: 55mm AccessoriesFull Bearing Alu Spur Gear HubSteel CVD Driver Shaft Alu ShocksComposite Fibre Chassis, Upper Deck,Shock Tower Metal gear DifferentialAlu Floating Servo Mount Full turnbuckleAlu Motor Monut
CARTEN M210FWD 1:10 M-Chassis Kit 239mm
CARTEN M210FWD – 1:10 FWD M‑Chassis Kit for Competitive RacingThe CARTEN M210FWD kit is a shaft‑drive, front‑wheel‑drive 1:10 M‑chassis designed for serious FWD touring competition. With three wheelbase options and premium hardware, it delivers optimal balance and performance.Main Features:Drivetrain: Shaft‑drive / FWD with full ball bearingsWheelbase: 239 mm (NBA107‑3)Track Width: 166 mmFinal Gear Ratio: 2.47 (42/17)Spur & Pinion: 72/39Build Quality: Steel CVD shafts, carbon fiber chassis with upper deck & shock towerAluminum Parts: motor/servo mounts, spur gear hub, oil shocks, adjustable turnbuckles, toe‑in mounts & anti‑roll barDifferential: metal gear diff in full bearing configurationIncludes:Chassis kit with carbon plates and aluminum partsAluminum oil shocksSteel CVD drive shafts and ball differentialAdjustable turnbuckles & anti‑roll barNot Included:Electronics (motor, ESC, servo, receiver)Body shell and tiresIdeal for FWD touring drivers looking to fine‑tune their setup for different tracks.
T410 1:10 EP Touring Car ARTR
CARTEN T410 1:10 EP TOURING CART410 Standar SpecificationDrivetrain Shaft Drive 4WDTrack Width: 190mmWheelbase: 258mmFinal Gear Ratio: 2.53Gear Ratio: 6.27Tire Diameter: 65mm AccessoriesFull Bearing Aluminum Spur Gear HubStell CVD Drive Shaft(Front only) Ball DifferentialAluminum Motor Mount Full TurnbuckleAluminum Center Driver Shaft
T410R 1:10 EP Touring Car Kit
CARTEN T410R 1:10 EP TOURING CART410R Standar SpecificationDrivetrain Shaft Drive 4WDTrack Width: 190mmWheelbase: 258mmFinal Gear Ratio: 2.53Gear Ratio: 6.27Tire Diameter: 65mm AccessoriesFull Bearing Aluminum Spur Gear HubStell CVD Drive Shaft(Front only) Ball DifferentialAluminum Motor Mount Full TurnbuckleAluminum Center Driver ShaftKit without:-Electric-Body-Tires/Wheels
1:10 T410-Rally Car 4WD Kit
The Carten T410 rally kit comes with one piece center cup joint for front and rear which allow the car for intense driving! The bathtub chassis with cover that improve dustproof effect. Alu. chassis plate for front and rear make it more durable! The front 7 degree kick back design make car more stable when running on bump condition track! Equipped with Alu. C hub, full CVD and Alu shock as font 67mm Rear 77mm.Full bearingFull CVD driver shaftTurnbuckleMetal gear differentialOne piece cup joint(F&R)Bathtub chassis( F&R AL plate)AL c-hubAL Rally shocks(F:67 R:77 mm)AL Motor mountAL Center shaftCarbon composite fiber F&R shock towers / Front upper steering deckRally complete tire setChassis coverTechnical Data:Drivetrain Shaft Drive 4WDTrack Width 188mmWheelbase 257~260mmInternal ratio 2.47(42/17T)Gear Ratio 6.59Tire Diameter 70mm
CARTEN T410D 1:10 Drift Car Kit
CARTEN T410D – 1/10 RWD Drift Car Kit with Tuning FlexibilityThe CARTEN T410D is a top-tier 1/10 scale RWD drift car kit designed for advanced hobbyists. Compact with 200 mm track width and adjustable 254–258 mm wheelbase, featuring carbon decks and aluminum components.Main Features:RWD drivetrain with ball differential for true drift performance200 mm adjustable track width254–258 mm wheelbase adjustabilityAluminum oil-filled shocks and aluminum motor/servo mountsSteel CVD drive shafts for durabilityFull aluminum suspension arms and full turnbuckle setupIncluded:Chassis with carbon decks and aluminum hardwareAluminum oil shocksSteel CVD axlesBall differentialFull turnbuckle setNot Included:Electronics (motor, ESC, radio)Body shell and wheelsAn excellent base for drift enthusiasts wanting extensive tuning options.
1:10 RC TT-02D Drift Spec Chassis
The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine.Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving.Includes full ball bearings and CVA (oil-filled) Super Mini shocks.Tamiya Sport-Tuned Motor and Aluminum heat sink is included.Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts.The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios.The skid-shaped underside of the bathtub type frame minimizes contact with the road surface.Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis.Technical details:- TT-02D tub frame chassis- 4WD all-wheel drive- central drive shaft- Cone differential f/r with four bevel gears- double wishbones f/r- completely ball-bearing- Track adjustable, front- Independent suspension- CVA Mini oil pressure shock absorbers (Super Mini)- Electric motor type RS-540 Sport Tuned- Aluminum radiator- Battery compartment suitable for all battery types- Gear ratio adjustable in 10 steps- Variable wheelbase: normal 258 mm (257) mm/short 252 mmTechnical specifications:1:10 scaleLength 376mmWidth approx. 182mmWheelbase 257mmScope of delivery:Kit model with detailed illustrated assembly instructions
1:10 RC HONDA NSX 2016 TT-02 Kit
The kit includes a strong Torque Tuned engine and an electronic cruise control. The TT-02 chassis has four wheel drive and independent suspension./li> >br> >li> >li>Length: 438mm, width: 190mm >/li> >br> >li>Beginner-friendly TT-02 chassis >/li> >br> >li>extremely robust >/li> >br> >li>enclosed 4WD all-wheel drive system >/li> >br> >li>transparent Honda NSX 2016 polycarbonate body incl. Mounting parts (mirrors)powerful 540 electric motor "Torque-Tuned"Individual suspension front and rearRim with radial-slick tyres>li>electronic cruise control>many tuning parts optionally available>br>required accessories: Scope of supply: kit model with detailed illustrated assembly instructions, electronic cruise control, 540 electric motor, polycarbonate body.
Onroad RC Cars – Built for Speed & Precision
Onroad RC cars are made for high grip and smooth surfaces. Whether you're racing, drifting, or just enjoying realistic road driving – you'll find the right model here.
Popular Types:
- Touring cars – stable, fast, great for racing
- Drift cars – designed for sideways action
- Formula & supercars – for scale realism
Available in 1:10, 1:18 and more, with 2WD or 4WD, brushed or brushless. We’ve got spare parts and upgrades too!