Filter
Filter
–
1:10
RC Brushless Sets 1:10
1:10 Brushless Set Thrust BL ECOV2 - 60A/3421KV
Our Thrust ECOV2 combo consisting of a sensorless brushless speed controller (ESC) and a 3421KV motor is designed for all owners of a 1:10 off-road or on-road vehicle. This system is ideal for converting from brushed to brushless or a complete rebuild. Thanks to the easy instalation and pre-confirigation from the factory, the set can be used immediately after installation.For ideal adaptation to the vehicle chassis, we recommend the use of a programming box, which is available separately (part number 2110062).With this box it is playfully easy to make the settings of the 10 different parameters. Highlights: • 2S & 3S LiPo suitable• Programmable via separately available programming box (2110062)• Ready-to-run out of the box Features Brushless ESC: • Water-proof 60A ESC incl. cooling fan• 2S & 3S LiPo suitable• T-Plug battery plug• Motor connection via 3.5mm gold contact plugs and sockets• Immediately ready to drive (no configuration necessary)• Easy calibration• Sensorless system• NiMH 4 - 9 cells & LiPo* 2 - 3 cells operation (*recommended)• Overheat protection 120°• Short-term load: 360A• BEC 7,4V/8,4V 6A (switch mode)• Multiple protection functions• Operating voltage 4.8 - 11.1V • Motor timing 18.75 deg. • LiPo voltage cutoff: 3.1V/cell (factory setting, programmable) Technichal Features ESC: • Dimensions (L/W/H): 50 x 35 x 37 mm • Weight incl. cable: 96 g• Motor limit @2S LiPo / 6 cells NiMH = On-road < 8T / Off-road < 11T and motor limit @3S LiPo / 9 cells NiMH = Onroad < 11T / Offroad < 14T Features Brushless Motor: • Splash-proof• Aluminum housing • Sensorless operation • Overheat protection: 105° Technichal Features Motor: • 3421 KV • 27.400 RPM @ 7.4 Volt • 4 Pole • Operating voltage: 4.8 - 11.1V • Motor size: 540• Motor housing length: 52.0 mm• Motor housing Durchmesser: : 36.0 mm• Shaft length: 14.5 mm• Shaft Durchmesser: : 3,17 mm • Weight: 200 g Scope of delivery: • 1 pcs. Thrust Eco ESC (Item no. 2110007V2) • 1 pcs. Thrust Eco Motor (Item no. 2130005) • Manual (german/english/french) Recommended accessories: • Item 2110062 - Programm box for Thrust ECOV2 ESC
Product number: ABS-2120002V2
Manufacturer: Absima
€84.95*
Sidewinder 4 Basher Combo 1406-4600k
SW4 SENSORLESS ESC BASHER EDITION W / 1406-4600 SENSOR READY MOTOR- 2s - 3s LiPo; 6 - 8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run.- Sensorless brushless and/or brushed motor operation.- Waterproof design ESC and splash resistant 30MM fan*- 5.0 volts fixed, 2 amps Peak BEC- Audible alerts for error conditions- Enhanced drag brake functionality- Smoother sensorless startups- Convenient transmitter programming for six common adjustable settings- Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (sold separately) or via Field Link Card (sold separately)- Telemetry Link compatible for Futaba® S.BUS2 (sold separately)The 1406-4600kv motor is a great motor for 2WD short course trucks on 2s LiPo and geared conservatively. It makes a great combo for 1/10th 2WD Stadium trucks and buggies on 2s for general bashing and limited runs on 3s; temperatures will climb quickly on 3s. It makes a great upgrade for 1/10th scale on-road cars for 2s and 3s use. NOT for use in 4WD short course trucks. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market.
Product number: CC-010-0164-01
Manufacturer: Castle Creations
€159.90*
Sidewinder 4 Basher Combo 1406-5700k
SW4 SENSORLESS ESC BASHER EDITION W / 1406-4600 SENSOR READY MOTOR- 2s - 3s LiPo; 6 - 8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run.- Sensorless brushless and/or brushed motor operation.- Waterproof design ESC and splash resistant 30MM fan*- 5.0 volts fixed, 2 amps Peak BEC- Audible alerts for error conditions- Enhanced drag brake functionality- Smoother sensorless startups- Convenient transmitter programming for six common adjustable settings- Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (sold separately) or via Field Link Card (sold separately)- Telemetry Link compatible for Futaba® S.BUS2 (sold separately)The 1406-4600kv motor is a great motor for 2WD short course trucks on 2s LiPo and geared conservatively. It makes a great combo for 1/10th 2WD Stadium trucks and buggies on 2s for general bashing and limited runs on 3s; temperatures will climb quickly on 3s. It makes a great upgrade for 1/10th scale on-road cars for 2s and 3s use. NOT for use in 4WD short course trucks. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market.
Product number: CC-010-0164-02
Manufacturer: Castle Creations
€159.90*
Sidewinder 4 SCT Combo 1410-3800k
SW4 WP SENSORLESS ESC SCT EDITION W / 1410-3800 SENSOR READY MOTOR- 2s - 3s LiPo; 6 - 8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run.- Sensorless brushless and/or brushed motor operation.- Waterproof design ESC and splash resistant 30MM fan*- 5.0 volts fixed, 2 amps Peak BEC- Audible alerts for error conditions- Enhanced drag brake functionality- Smoother sensorless startups- Convenient transmitter programming for six common adjustable settings- Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (sold separately) or via Field Link Card (sold separately)- Telemetry Link compatible for Futaba® S.BUS2 (sold separately)The 1410-3800kv is perfect for short course trucks running on 2s LiPo and weighing up to 6.5 lbs; it can be run on a 3s LiPo with very conservative gearing. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 3s LiPo.
Product number: CC-010-0164-05
Manufacturer: Castle Creations
€169.90*
1:10 SCT-Combo 80A/3660SL/2750kV/2-3S
TECHNICAL DATA MOTORMotor shaft: 5mm (diameter) / 18mm (length)Motor KV: 2750 (Umin/V)Lipo Cell count: 2-3SPoles: 4Type: SensorlessConnector system: 4mm Gold contact PlugMotor length: 60mmMotor diameter: 36mm (outside)Weight: approx. 256g>EMPOSED APPLICATION1/10 Monster1/10 Truggy & Trucks1/10 Short Course1/10 4WD BuggySupply Scope:80A Konect controller by HobbyWing2750kv / 3660SL Brushless motor by HobbyWingLCD programming card by HobbyWingProgramming cable for connecting the programming card to the controllerManual
Product number: KN-COMBO-C1
Manufacturer: Konect
€129.90*
1:10 SCT-Combo 80A/3660SL/3700kV/2-3S
TECHNICAL DATA CONTROLLERContinuous current: 80APeak current: 520AInput voltage:2-3S LiPo batteries6-9 cells NiMH / NiCd batteriesBEC Output power:6V / 7.4V (switchable) 3A (Switch mode) max. 6AMotor Limits: all 3000kv - 5400kv Motors (sensorless) of 3650 to 3660 sizeType: Sensorless systemPlug system:Battery side: Dean / T-plugESC / Motor: 4mm Gold contact SocketsReceiver: JR / GraupnerDimensions approx.: 49 x 39,5 x 34,7mm incl. fan Weight: approx. 102g> TECHNICAL DATA MOTORMotor shaft: 5mm (diameter) / 18mm (length)Motor KV: 3700 (Umin/V)Lipo Number of cells: 2-3SPoles: 4Type: SensorlessConnector system: 4mm Gold contact PlugMotor length: 60mmMotor diameter: 36mm (outside)Weight: approx. 221g>EMPOSED APPLICATION1/10 Monster1/10 Truggy & Trucks1/10 Short Course1/10 2WD & 4WD Buggy DELIVERY AREAS:80A Konect controller by HobbyWing3700kv / 3660SL Brushless motor by HobbyWingLCD programming card by HobbyWingProgramming cable for connecting the programming card to the controllerManual
Product number: KN-COMBO-C3
Manufacturer: Konect
€139.90*
Nosram Brushless Combo Pearl Evo v2 / Pure Evolution 5.5T
The new Pearl Evolution version 2 speed control and the Pure Evolution 8.5T brushless modified motor combine the two times World Championship winning brushless technology in an unbeatable combo of world class level modified racing! Step into the powerful world of brushless driving fun with NOSRAM! As a leading manufacturer of r/c speed controls and motors, NOSRAM can already look back upon years of expe-rience and multiple race victories around the world with brushless technology. NOSRAM brushless systems are the leading technology featuring extraordinary power and super smooth throttle response! Our brushless combos offer best performance at an attractive price! Get Started – the future is now! Key features Pearl Evolution version 2 • dual xps.mod software: independent adjustment of "feel" and "boost" • usb software updateability • revolutionary superBEC: constant 6V/3A output with 3.0V to 7.4V batteries • extra small size: 30.5x34mm Key features Pure Evolution • dismountable • EasySolderDesign • PreciSensorTM system• reproducible timing
Product number: NR-90734
Manufacturer: Nosram
€299.90*
Razer10 G2 Combo 3000kv 60A
Features (ESC):More compact and modern than its predecessorFully water and dustproof ESC (not applicable to the motor)ON/OFF switch with setup buttonS-BEC with 6V and 3A peak currentPlug and Play, battery and motor connectors pre-solderedMultiple protection features: low voltage cutoff, thermal protection, and signal loss protectionEasy programming via setup buttonSeparate programming port, easy connection for optional LED programming cardFeatures (Motor):4-pole rotor design for high torque and quick responseCNC machined high-strength aluminum housing for optimal heat dissipationMotor winding made of pure, double-insulated copper wirePrecision ball bearings for smooth operation and longevityHighly flexible silicone connection cables with pre-soldered 4mm connectorsHigh-strength, polished 3.17mm steel rotor shaftTechnical Specifications:ESCItem No.: R01225Current: 60AType: SensorlessCells: 2-3S LiPo / 6-9 cells NiMHMotor Limit: 2S: 3652/3660 motor, kV = 60003S: 3652/3660 motor, kV = 3500BEC: 6V @ 3AFan: Yes, powered by BECProgramming Port: YesBattery Connection: T-PlugMotor Connection: 4mmDimensions: 46 x 36.5 x 35.5mmWeight (incl. Cables): 98.2gApplication: 1/10 On-Road, Buggy, Short Course Truck (2WD)MotorItem No.: R01230kV Rating: 3000kVCells: 2-3SPoles: 4Outer Diameter: 35mmLength: 52mmShaft Diameter: 3.17mmShaft Length: 15mmWeight (incl. Cables): 198gApplication: 1/10 Onroad, Buggy, light SCT/Truck/MTDelivery:1x Razer ten G2 ESC with 60A, pre-wired with battery connector and motor connection1x Razer ten Motor with 3000kV, pre-wired with 4mm connectos1x ManualAccessories:R01269 Razer LED Program Box
Product number: RO-R01254
Manufacturer: Robitronic
€78.95*
Razer10 G2 Combo 3250kv 60A
Features (ESC):More compact and modern than its predecessorFully water and dustproof ESC (not applicable to the motor)ON/OFF switch with setup buttonS-BEC with 6V and 3A peak currentPlug and Play, battery and motor connectors pre-solderedMultiple protection features: low voltage cutoff, thermal protection, and signal loss protectionEasy programming via setup buttonSeparate programming port, easy connection for optional LED programming cardFeatures (Motor):4-pole rotor design for high torque and quick responseCNC machined high-strength aluminum housing for optimal heat dissipationMotor winding made of pure, double-insulated copper wirePrecision ball bearings for smooth operation and longevityHighly flexible silicone connection cables with pre-soldered 4mm connectorsHigh-strength, polished 3.17mm steel rotor shaftTechnical Specifications:ESCItem No.: R01225Current: 60AType: SensorlessCells: 2-3S LiPo / 6-9 cells NiMHMotor Limit: 2S: 3652/3660 motor, kV = 60003S: 3652/3660 motor, kV = 3500BEC: 6V @ 3AFan: Yes, powered by BECProgramming Port: YesBattery Connection: T-PlugMotor Connection: 4mmDimensions: 46 x 36.5 x 35.5mmWeight (incl. Cables): 98.2gApplication: 1/10 On-Road, Buggy, Short Course Truck (2WD)MotorItem No.: R01230kV Rating: 3250kVCells: 2-3SPoles: 4Outer Diameter: 35mmLength: 52mmShaft Diameter: 3.17mmShaft Length: 15mmWeight (incl. Cables): 204gApplication: 1/10 Onroad, Buggy, light SCT/Truck/MTDelivery:1x Razer ten G2 ESC with 60A, pre-wired with battery connector and motor connection1x Razer ten Motor with 3250kV, pre-wired with 4mm connectos1x ManualAccessories:R01269 Razer LED Program Box
Product number: RO-R01255
Manufacturer: Robitronic
€79.95*
Razer10 G2 Combo 4000kv 60A
Features (ESC):More compact and modern than its predecessorFully water and dustproof ESC (not applicable to the motor)ON/OFF switch with setup buttonS-BEC with 6V and 3A peak currentPlug and Play, battery and motor connectors pre-solderedMultiple protection features: low voltage cutoff, thermal protection, and signal loss protectionEasy programming via setup buttonSeparate programming port, easy connection for optional LED programming cardFeatures (Motor):4-pole rotor design for high torque and quick responseCNC machined high-strength aluminum housing for optimal heat dissipationMotor winding made of pure, double-insulated copper wirePrecision ball bearings for smooth operation and longevityHighly flexible silicone connection cables with pre-soldered 4mm connectorsHigh-strength, polished 3.17mm steel rotor shaftTechnical Specifications:ESCItem No.: R01225Current: 60AType: SensorlessCells: 2-3S LiPo / 6-9 cells NiMHMotor Limit: 2S: 3652/3660 motor, kV = 60003S: 3652/3660 motor, kV = 3500BEC: 6V @ 3AFan: Yes, powered by BECProgramming Port: YesBattery Connection: T-PlugMotor Connection: 4mmDimensions: 46 x 36.5 x 35.5mmWeight (incl. Cables): 98.2gApplication: 1/10 On-Road, Buggy, Short Course Truck (2WD)MotorItem No.: R01232kV Rating: 4000kVCells: 2-3SPoles: 4Outer Diameter: 35mmLength: 52mmShaft Diameter: 3.17mmShaft Length: 15mmWeight (incl. Cables): 207gApplication: 1/10 Onroad, Buggy, light SCT/Truck/MTDelivery:1x Razer ten G2 ESC with 60A, pre-wired with battery connector and motor connection1x Razer ten Motor with 4000kV, pre-wired with 4mm connectos1x ManualAccessories:R01269 Razer LED Program Box
Product number: RO-R01256
Manufacturer: Robitronic
€79.95*
Razer10 G2 Combo 4600kv 60A
Features (ESC):More compact and modern than its predecessorFully water and dustproof ESC (not applicable to the motor)ON/OFF switch with setup buttonS-BEC with 6V and 3A peak currentPlug and Play, battery and motor connectors pre-solderedMultiple protection features: low voltage cutoff, thermal protection, and signal loss protectionEasy programming via setup buttonSeparate programming port, easy connection for optional LED programming cardFeatures (Motor):4-pole rotor design for high torque and quick responseCNC machined high-strength aluminum housing for optimal heat dissipationMotor winding made of pure, double-insulated copper wirePrecision ball bearings for smooth operation and longevityHighly flexible silicone connection cables with pre-soldered 4mm connectorsHigh-strength, polished 3.17mm steel rotor shaftTechnical Specifications:ESCItem No.: R01225Current: 60AType: SensorlessCells: 2-3S LiPo / 6-9 cells NiMHMotor Limit: 2S: 3652/3660 motor, kV = 60003S: 3652/3660 motor, kV = 3500BEC: 6V @ 3AFan: Yes, powered by BECProgramming Port: YesBattery Connection: T-PlugMotor Connection: 4mmDimensions: 46 x 36.5 x 35.5mmWeight (incl. Cables): 98.2gApplication: 1/10 On-Road, Buggy, Short Course Truck (2WD)MotorItem No.: R01230kV Rating: 4600kVCells: 2SPoles: 4Outer Diameter: 35mmLength: 52mmShaft Diameter: 3.17mmShaft Length: 15mmWeight (incl. Cables): 200gApplication: 1/10 Onroad, Buggy, light SCT/Truck/MTDelivery:1x Razer ten G2 ESC with 60A, pre-wired with battery connector and motor connection1x Razer ten Motor with 4600kV, pre-wired with 4mm connectos1x ManualAccessories:R01269 Razer LED Program Box
Product number: RO-R01257
Manufacturer: Robitronic
€79.95*
Robitronic LED Programmerbox Razer ten + eight
This LED program box is for programming Robitronic Razer ten & eight ESCs. Its friendly interface makes ESC programming easy and quick. Its compact, portable and very applicable for field use.
Product number: RO-R01269
Manufacturer: Robitronic
€15.90*