Brushless Sets
RC Brushless Sets
1:10 Brushless Set Thrust BL ECOV2 - 60A/3421KV
Our Thrust ECOV2 combo consisting of a sensorless brushless speed controller (ESC) and a 3421KV motor is designed for all owners of a 1:10 off-road or on-road vehicle. This system is ideal for converting from brushed to brushless or a complete rebuild. Thanks to the easy instalation and pre-confirigation from the factory, the set can be used immediately after installation.For ideal adaptation to the vehicle chassis, we recommend the use of a programming box, which is available separately (part number 2110062).With this box it is playfully easy to make the settings of the 10 different parameters. Highlights: • 2S & 3S LiPo suitable• Programmable via separately available programming box (2110062)• Ready-to-run out of the box Features Brushless ESC: • Water-proof 60A ESC incl. cooling fan• 2S & 3S LiPo suitable• T-Plug battery plug• Motor connection via 3.5mm gold contact plugs and sockets• Immediately ready to drive (no configuration necessary)• Easy calibration• Sensorless system• NiMH 4 - 9 cells & LiPo* 2 - 3 cells operation (*recommended)• Overheat protection 120°• Short-term load: 360A• BEC 7,4V/8,4V 6A (switch mode)• Multiple protection functions• Operating voltage 4.8 - 11.1V • Motor timing 18.75 deg. • LiPo voltage cutoff: 3.1V/cell (factory setting, programmable) Technichal Features ESC: • Dimensions (L/W/H): 50 x 35 x 37 mm • Weight incl. cable: 96 g• Motor limit @2S LiPo / 6 cells NiMH = On-road < 8T / Off-road < 11T and motor limit @3S LiPo / 9 cells NiMH = Onroad < 11T / Offroad < 14T Features Brushless Motor: • Splash-proof• Aluminum housing • Sensorless operation • Overheat protection: 105° Technichal Features Motor: • 3421 KV • 27.400 RPM @ 7.4 Volt • 4 Pole • Operating voltage: 4.8 - 11.1V • Motor size: 540• Motor housing length: 52.0 mm• Motor housing Durchmesser: : 36.0 mm• Shaft length: 14.5 mm• Shaft Durchmesser: : 3,17 mm • Weight: 200 g Scope of delivery: • 1 pcs. Thrust Eco ESC (Item no. 2110007V2) • 1 pcs. Thrust Eco Motor (Item no. 2130005) • Manual (german/english/french) Recommended accessories: • Item 2110062 - Programm box for Thrust ECOV2 ESC
Sidewinder 4 Basher Combo 1406-5700k
SW4 SENSORLESS ESC BASHER EDITION W / 1406-4600 SENSOR READY MOTOR- 2s - 3s LiPo; 6 - 8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run.- Sensorless brushless and/or brushed motor operation.- Waterproof design ESC and splash resistant 30MM fan*- 5.0 volts fixed, 2 amps Peak BEC- Audible alerts for error conditions- Enhanced drag brake functionality- Smoother sensorless startups- Convenient transmitter programming for six common adjustable settings- Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (sold separately) or via Field Link Card (sold separately)- Telemetry Link compatible for Futaba® S.BUS2 (sold separately)The 1406-4600kv motor is a great motor for 2WD short course trucks on 2s LiPo and geared conservatively. It makes a great combo for 1/10th 2WD Stadium trucks and buggies on 2s for general bashing and limited runs on 3s; temperatures will climb quickly on 3s. It makes a great upgrade for 1/10th scale on-road cars for 2s and 3s use. NOT for use in 4WD short course trucks. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market.
Sidewinder 4 SCT Combo 1410-3800k
SW4 WP SENSORLESS ESC SCT EDITION W / 1410-3800 SENSOR READY MOTOR- 2s - 3s LiPo; 6 - 8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run.- Sensorless brushless and/or brushed motor operation.- Waterproof design ESC and splash resistant 30MM fan*- 5.0 volts fixed, 2 amps Peak BEC- Audible alerts for error conditions- Enhanced drag brake functionality- Smoother sensorless startups- Convenient transmitter programming for six common adjustable settings- Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (sold separately) or via Field Link Card (sold separately)- Telemetry Link compatible for Futaba® S.BUS2 (sold separately)The 1410-3800kv is perfect for short course trucks running on 2s LiPo and weighing up to 6.5 lbs; it can be run on a 3s LiPo with very conservative gearing. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 3s LiPo.
Mamba Monster X 8S Combo 1717-1650KV
The 1717-1650KV SENSORED COMBO is a perfect upgrade for heavier 1:8th vehicles and lighter 1:6th vehicles weighing up to 9 kg (20 lbs) and running up to 8S LiPo; it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles.COMBO PURCHASE INCLUDES:- Mamba Monster X 8S ESC- 4-POLE Sensored 1717-1650Kv Motor- Castle Sensor Harness Adapter- 200mm Sensor Wire- Mamba Decals- ESC Quick Start Guide- Motor Quick Start GuideESC FEATURES:- Input Voltage Range 2S-8S LiPo- Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V)- CRYO-DRIVE™ Technology minimizes the amount of time the ESC's electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs- ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer- Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation- Oversized factory equipped thermally controlled 40MM cooling fan- Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters- Waterproof design for all weather conditions- Data logging capability to capture and record performance data from your vehicle- Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter- Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff- Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake- Easily tune and update ESC with USB and Bluetooth™ programming optionsMOTOR FEATURES:- 4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat- SMARTSENSE™ uses the motors sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle's ULTRA- EFFICIENT sensorless mode.- Proprietary stator winding produces low internal resistance for a cooler running motor- Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life- High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs
Mamba Monster X 8S Combo 1717-1650KV
The 1717-1650KV SENSORED COMBO is a perfect upgrade for heavier 1:8th vehicles and lighter 1:6th vehicles weighing up to 9 kg (20 lbs) and running up to 8S LiPo; it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles.COMBO PURCHASE INCLUDES:- Mamba Monster X 8S ESC- 4-POLE Sensored 1717-1650Kv Motor- Castle Sensor Harness Adapter- 200mm Sensor Wire- Mamba Decals- ESC Quick Start Guide- Motor Quick Start GuideESC FEATURES:- Input Voltage Range 2S-8S LiPo- Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V)- CRYO-DRIVE™ Technology minimizes the amount of time the ESC's electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs- ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer- Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation- Oversized factory equipped thermally controlled 40MM cooling fan- Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters- Waterproof design for all weather conditions- Data logging capability to capture and record performance data from your vehicle- Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter- Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff- Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake- Easily tune and update ESC with USB and Bluetooth™ programming optionsMOTOR FEATURES:- 4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat- SMARTSENSE™ uses the motors sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle's ULTRA- EFFICIENT sensorless mode.- Proprietary stator winding produces low internal resistance for a cooler running motor- Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life- High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs
Samurai Pro-SCT Combo 5150kv Waterproof
ESC:Cont. Current: 120ABurst Current: 760ASuitable: 1:10 Short Course CarMotor Type: 2 Pol senorless Brushless Motor up to 5150kVNiMh: 5-12 CellLipo/LiFE/Li-Ion: 2-4 CellBEC Output: 6.0/7.4V 7ASize: 51x37x33mmWeight: 90g
1:8 Brushless YAKUZA BOSS Combo 220A+1900kv
Die Brushless-Autoregler der Baureihe YAKUZA 1/8 zeichnen sich insbesondere durch den Staub- und Spritzwasserschutz sowie ihre bis 8,4 V einstellbare BEC-Spannung aus. Damit sind diese Regler für den Einsatz in Verbindung mit High-Voltage-Servos ideal abgestimmt. Es ist unbedingt auf eine korrekte Übersetzung des Antriebes zu achten. Bei Beginn der Abstimmung ist stets ein Ritzel mit kleinerer Anzahl an Zähnen zu verwenden, um sich dann an den optimalen Leistungsbereich heranzutasten. Die Kabel einschließlich der Steckverbindungen sowohl am Regler als auch am Motor sind werkseitig mit Goldkontakten 5,5 mm aufeinander abgestimmt. Wichtige Hinweise: Die Regler der Serie YAKUZA 1/8 eignen sich nicht für den Betrieb mit sechspoligen Tenshock-Motoren. Herkömmliche Steckverbindungen wie beispielsweise G4, EC3, XT60, MPX oder DEANS sind für Dauerströme bis 160 A und Spitzenströme bis 1.100 A nicht geeignet und dürfen hier keinesfalls verwendet werden!
Hobbywing Ezrun MAX6 G2 Brushless ESC 200A 3-8S LiPo Bluetooth
Hobbywing Ezrun MAX6 G2 Brushless ESC for maximum performanceThe Hobbywing Ezrun MAX6 G2 is a powerful brushless ESC designed for demanding RC applications. With 200A continuous current and high voltage support, it delivers excellent performance and control for large scale models.Integrated Bluetooth controlProgram via smartphone using HWLink2 appNo external programming card neededData logging up to 10 minutesHigh power and smart technology200A continuous and 1200A peak currentSupports 3S to 8S LiPo batteriesSmart freewheeling for reduced heatTemperature controlled cooling fanStrong BEC and protection systemsSwitch mode BEC 6V 7.4V or 8.4V at 8ALow voltage protectionThermal protectionSignal loss and current protectionOptimized for modern brushless systemsPerfect match for Ezrun 4990 G2 and 5690 G2 motors. Ideal for 1:6 and 1:7 onroad cars, trucks and monster trucks.Technical dataType: sensored brushless ESCCurrent: 200A continuous 1200A peakInput: 3 to 8S LiPoSize: 70x56x45.5mmWeight: 245g
Quicrun Fusion SE for Rock Crawler 1800kV
The SE edition of the regular Quicrun Fusion offers a number of improvements and optimizations that have been made to this very special motor/ESC combo in order to continue making crawling as fun and beautiful as possible. Visually, the most striking thing is the design, which is atypical for a fusion combo but is also quite appealing.Of course, space in the car is often very limited and there is little room to properly accommodate the various cables and other electronic items. But the Quicrun Fusion SE is just as big as a typical 550 motor and with a weight of only 201g You simply don't notice that the motor and ESC have been combined here. Thanks to the intelligent torque and speed control, a crawler can easily adapt to any situation. This combo is supported by an excellent waterproof and dustproof casing. So the fun really knows no bounds. Even the electronic switch is protected accordingly. The technology used is called FOC (Field-Oriented-Control) and is responsible for this super control feel. Due to the sinusoidal motor control, the ESC and motor remain cooler and You can achieve a smooth, quiet motor running.Features2in1: Motor and ESC combined as oneWith a length of almost only 58mm, it is now even smaller, more compact and lighter than beforeStrong torque even at slow speedWaterproof and dustproofPowerful built-in BEC with Switch Mode for the voltageVarious safety mechanisms against: undervoltage, overheating, loss of gas, etc.Technical Specifications:Type: Brushless FOCSensoredCurrent (continuous): 40ACells: 2s-3s LiPo, 6s-9s NiMHBEC: 6V/7.4V @ 4A (Switch-Mode)Poles: 4kV Raring: 1800kVOuter Diameter: 36mmLength: 58.1mmShaft Diameter: 3.175mmShaft Length: 16.5mmWaterproof: Yes, according to IP-67 StandardProgramming: - compatible with the LED Program Box- independent programming interface (switch position)Weight: 201gApplication: 1/10 Rock Crawler
XeRun AXE R2 Extended Wire Set 300mm
This sensor extension cable is the ideal support if the existing sensor cable between the motor and ESC of the AX R2 Power System Combos is not long enough. Thanks to the new plug connection, they also take up less space compared to their predecessor and are extremely waterproof. Length: 300mm.
Hobbywing Ezrun MAX10 G2S 80A Combo with Ezrun 3652SD G3 3300kV
Brushless Combo Hobbywing Ezrun MAX10 G2S 80A with 3652SD G3 3300kV for 1/10 ScaleThis combo brings together the Ezrun MAX10 G2S speed controller at 80A and the Ezrun 3652SD G3 motor at 3300kV - a factory-matched Brushless drive package for 1/10 scale vehicles. The controller can be configured directly via smartphone: the Bluetooth module is integrated into the power switch, and the connection runs through the HW-LINK app for parameter tuning, data analysis, and firmware updates. Turbo Timing up to 20 degrees and the motor overheat protection are exclusively available with compatible Hobbywing motors and are ready to use out of the box with the included 3652SD G3.Ezrun MAX10 G2S FeaturesBluetooth module integrated in the power switch - smartphone programming without any additional deviceInternal data logging of the last 10 minutes of driving, graphically viewable in the HW-LINK appTurbo Timing up to 20 degrees - up to approx. 25% higher top RPM with a compatible Hobbywing motorThree-stage BEC: 6V / 7.4V / 8.4V at 5A continuous current (switch mode)Frameless fan with side air outlet, temperature-controlled activationController and motor waterproof to IP67, with waterproof sensor cableProtection against low voltage, overheating, and signal loss; capacitor overheat protectionXT60 input connector, gold-plated output connectorsEzrun 3652SD G3 Motor FeaturesBrushless sensored motor at 3300kV4-pole rotor for high torque, fast acceleration, and stable power deliveryCNC-machined aluminum housing with high-precision bearingsWaterproof to IP67Suitable for 1/10 on-road and off-road short course truck (light-duty)ESC SpecificationsType: 1/10 Brushless, sensored and sensorlessCurrent (continuous/peak): 80A / 520AInput voltage: 2-3S LiPoMotor limits: 2S LiPo KV <= 6000 / 3S LiPo KV <= 4200Dimensions: 53 x 39.5 x 37.2 mm / Weight: 125 gMotor SpecificationsKV rating: 3300kV / No-load current: <= 3.9ACell count: 2-3S LiPo / Poles: 4Length: 53 mm / Diameter: 37 mm / Shaft diameter: 3.175 mmWeight: 228 gIncluded in the Box1x Ezrun MAX10 G2S ESC 80A1x Ezrun 3652SD G3 Motor 3300kVRequired SeparatelyBattery: required separately (2S or 3S LiPo; at least 3S for 7.4V or 8.4V BEC output)Charger: required separatelyOptional AccessoriesHW30502002 LCD Programming Box ProHW30850400 OTA Bluetooth Programming Module
Hobbywing Ezrun MAX10 G2S 80A Combo with Ezrun 3652SD G3 4100kV
Brushless Combo Ezrun MAX10 G2S 80A with 3652SD G3 4100kV for 1/10The Hobbywing Ezrun MAX10 G2S combo pairs the 80A Brushless ESC MAX10 G2S with the Brushless motor 3652SD G3 (4100kV) in a factory-matched drivetrain package for the 1/10 scale. Programming is done directly via smartphone through the HW-LINK app with no additional devices required. Exclusively with Hobbywing motors: Turbo Timing up to 20 degrees for up to approx. 25% higher maximum RPM.Brushless ESC Ezrun MAX10 G2S - HighlightsBluetooth module integrated in the switch - programming, data analysis and firmware update via HW-LINK appInternal data logging of the last 10 minutes of drive time, graphically viewable in the appTurbo Timing up to 20 degrees - activatable exclusively with Hobbywing motorsBEC with three levels: 6V / 7.4V / 8.4V at 5A (switch mode) - 8.4V for high-voltage servosFrameless fan with side air outlet, temperature-controlled activationProtection functions: low voltage, overheat, signal loss, capacitor overheat protectionWaterproof to IP67, including waterproof sensor cableInput XT60, output gold-plated connectors; dimensions: 53 x 39.5 x 37.2 mm; weight: 125 gBrushless Motor Ezrun 3652SD G3 - Highlights4100kV, 4-pole rotor for high torque and fast accelerationCNC-machined aluminium housing, high-precision bearingsWaterproof to IP672-3S LiPo, no-load current max. 5.0A; length 53 mm, diameter 37 mm, shaft 3.175 mm; weight: 228 gApplication: 1/10 on-road / off-road short course truck (light-duty)Package Contents1x Ezrun MAX10 G2S Brushless ESC 80A1x Ezrun 3652SD G3 Brushless Motor 4100kVAdditionally RequiredBattery: 2-3S LiPo (not included); note: a minimum 3S battery is required for 7.4V or 8.4V BEC outputCharger: not includedOptional AccessoriesHW30502002 LCD Programming Box ProHW30850400 OTA Bluetooth Programming Module
Hobbywing Ezrun MAX10 G2S 80A Combo with Ezrun 3652SD G3 5400kV
Brushless Combo Hobbywing Ezrun MAX10 G2S 80A with 3652SD G3 5400kV for 1/10The Hobbywing Ezrun MAX10 G2S Combo pairs the 80A Brushless ESC MAX10 G2S with the Brushless motor Ezrun 3652SD G3 at 5400kV into a factory-matched drive system for 1/10 scale. The integrated Bluetooth module in the power switch enables programming, data analysis and firmware updates directly via smartphone through the HW-LINK app - no additional devices required. Internal data logging records the last 10 minutes of driving time for graphical analysis. Turbo Timing up to 20 degrees increases maximum RPM by up to approx. 25% and is exclusively available with Hobbywing motors. Both ESC and motor are dust- and waterproof to IP67.Key Features of the Brushless ESC Ezrun MAX10 G2SBluetooth module integrated in the power switch: smartphone programming via HW-LINK app, no extra hardware neededInternal data logging of the last 10 minutes of drive time, graphically analysable in the HW-LINK appTurbo Timing up to 20 degrees - up to approx. 25% more maximum RPM with a compatible Hobbywing motor3-step BEC: 6V, 7.4V and 8.4V at 5A in switch mode (8.4V for high-voltage servos)Frameless fan with side air outlet, temperature-controlled activationProtection features: capacitor overheat protection, low-voltage cutoff, signal-loss protectionWaterproof to IP67, with waterproof sensor cableInput voltage: 2-3S LiPo; current: 80A continuous / 520A peakDimensions: 53 x 39.5 x 37.2 mm; weight: 125 g incl. cables and connectorsConnectors: XT60 input, gold-plated bullet outputKey Features of the Brushless Motor Ezrun 3652SD G3Brushless sensored motor at 5400kV for precise control4-pole rotor for high torque, fast acceleration and stable power deliveryCNC-machined aluminium housing and high-precision bearingsWaterproof to IP67Shaft diameter: 3.175 mm; length: 53 mm; diameter: 37 mm; weight: 227 gNo-load current: max. 6.8A; designed for 2S LiPoESC Technical SpecificationsType: 1/10 Brushless, sensored and sensorlessInput voltage: 2-3S LiPoMotor limits: 2S LiPo KV max. 6000 / 3S LiPo KV max. 4200 (3652/3665 motors)Programming: Bluetooth (HW-LINK app), LCD programming box, OTA programming moduleApplication: 1/10 on-road, buggy, rally and short course truckPackage Contents1x Ezrun MAX10 G2S ESC 80A1x Ezrun 3652SD G3 motor 5400kVOptional AccessoriesLCD Programming Box Pro (HW30502002)OTA Bluetooth Programming Module (HW30850400)Note: A minimum 3S battery is required for 7.4V or 8.4V BEC output. Bluetooth range is approx. 5 m by design. Battery and charger are not included.
Hobbywing Ezrun MAX10 G2S 140A Combo with Ezrun 3665SD G3 3200kV
Brushless Combo Ezrun MAX10 G2S 140A with 3665SD G3 3200kV for 1/10The Hobbywing Ezrun MAX10 G2S combo pairs the 140A ESC with the Ezrun 3665SD G3 Brushless motor in a factory-matched drive system for 1/10 short course trucks, trucks and monster trucks. The MAX10 G2S is programmed via Bluetooth directly through the HW-LINK app - no additional programming device required. The Bluetooth module is integrated into the switch and enables parameter setup, data analysis and firmware updates via smartphone. With Turbo Timing up to 32 degrees, the maximum RPM increases by up to approx. 25 % when used with the included Hobbywing motor. Both components are dust- and waterproof to IP67.Brushless ESC Ezrun MAX10 G2S - HighlightsBluetooth module integrated into the switch - programming via HW-LINK app, no extra device neededInternal data logging of the last 10 minutes of driving time, graphically displayed in the appTurbo Timing up to 32 degrees - up to approx. 25 % higher top RPM with Hobbywing motorThree-stage BEC: 6V / 7.4V / 8.4V at 5A (switch mode) for high-voltage servosInput: XT60, output: gold-contact connectorsFrameless fan with side air outlet, temperature-controlled activationProtection: low voltage, overheat, signal loss, capacitor overheatIP67 waterproof, dimensions: 53 x 39.5 x 37.2 mm, weight: 125 gCompatible with 2-4S LiPoBrushless Motor Ezrun 3665SD G3 - HighlightsBrushless sensored motor with 3200kV and 4-pole rotorHigh torque for fast acceleration and consistent power deliveryCNC-machined aluminium housing with high-precision bearingsIP67 waterproof, shaft diameter 5 mm, weight 304 gCompatible with 2-3S LiPoPackage Contents1x Ezrun MAX10 G2S ESC 140A1x Ezrun 3665SD G3 Motor 3200kVAdditionally RequiredLiPo battery (2-4S, minimum 3S for 7.4V / 8.4V BEC output) - sold separatelyCharger - sold separatelyOptional AccessoriesHW30502002 LCD Programming Box ProHW30850400 OTA Bluetooth Programming Module
Hobbywing Ezrun MAX10 G2S 140A Combo with Ezrun 3665SD G3 4000kV
Brushless Combo Ezrun MAX10 G2S 140A with 3665SD G3 4000kV for 1/10 ScaleThis factory-matched Brushless combo pairs the Ezrun MAX10 G2S ESC at 140A with the Ezrun 3665SD G3 motor at 4000kV for 1/10 scale vehicles. The integrated Bluetooth module in the switch allows direct smartphone programming via the HW-LINK app - no additional devices required. Turbo Timing up to 32 degrees boosts maximum RPM by up to approx. 25% and is exclusively available with Hobbywing motors. Both ESC and motor are dust- and waterproof to IP67, including a waterproof sensor cable.Brushless ESC Ezrun MAX10 G2S - SpecificationsContinuous / Peak current: 140A / 880AInput voltage: 2-4S LiPoBEC: 6V / 7.4V / 8.4V adjustable, 5A continuous (switch mode)Turbo Timing up to 32 degreesProgramming via Bluetooth (HW-LINK app), LCD programming box or OTA moduleInternal data logging of the last 10 minutes of driving timeThird BEC level at 8.4V for high-voltage servosFrameless fan with side air outlet, temperature-controlled activationProtection against low voltage, overheating and signal lossWaterproof to IP67, XT60 input, dimensions: 53 x 39.5 x 37.2 mm, weight: 125 gBrushless Motor Ezrun 3665SD G3 - SpecificationsType: Brushless, Sensored, 4-poleSpeed: 4000kV, no-load current max. 8.2ACell count: 2-3S LiPoCNC-machined aluminium housing, high-precision bearingsLength: 65.8 mm, diameter: 37 mm, shaft diameter: 5 mm, weight: 297 gWaterproof to IP67Suitable for: 1/10 Short Course Truck, Truggy / MonsterIncluded in Delivery1x Ezrun MAX10 G2S ESC 140A1x Ezrun 3665SD G3 Motor 4000kVRequired SeparatelyBattery: required separately (2-4S LiPo for ESC; 2-3S LiPo recommended for motor)Charger: required separatelyNote: A minimum 3S battery is required for 7.4V or 8.4V BEC outputOptional AccessoriesHW30502002 LCD Programming Box ProHW30850400 OTA Bluetooth Programming Module
EzRun MAX8 Combo with SL-4247-2200kV Sensorless XT90-Plug
2x XT90 plug
Ezrun MAX5 Combo SL 56113 800kV Sensorless
Die Ezrun Serie bietet zahlreiche sensorlose Brushless Systeme für ambitionierte Hobby Racer und die es noch werden wollen. Sie sind die optimale Wahl wenn es darum geht deine RTR Austattung gegen hochwertige Elektronik mit viel Unterhaltungsgehalt auszutauschen.Der Max5 ist die perfekte Wahl für Monstertrucks im Maßstab 1/5 die mehr Leistung wollen. Geeignet für bis zu 8S LiPos kann er das maximalste aus allen sensorlosen Motoren holen. Das extrem Leistungsstarke BEC versorgt den Empfänger als auch die Servos mit mehr als genügend Leistung. Der elektrische Schalter ist extrem Robust und zuverlässig, dank des speziellen Kühlsystems läuft der Regler immer in einem optimalen Temeperaturbereich.Das Set besteht aus folgenden Komponenten:Regler Ezrun MAX5 200A 3-8s für 1/5Elektromotor Ezrun SL 56113 800kV für 1/5Features:Für alle Wetterbedingungen geeignetHervorragend gegen Wasser und Staub abgedichtet machen diesen Regler zu einer Waffe bei jedem Wetter oder unter jeden Bedingungen. Egal ob extrem staubige Pisten, regennasse Fahrbahn, Schnee, Pfützen oder Schotter, mit dem MAX5 geht es immer weiter.Fortschrittlicher und sicherer elektronischer SchalterDieser elektronischer Schalter hat eine Lebenszeit von mehr als 50.000 Schalvorgängen und ist zudem komplett Wasser- & Staubdicht und besitzt zudem ein stoßfestes Design. Hierdurch gehören Probleme wie rostige Kontaktstellen oder Feuchtigkeit im Schalter der Vergangenheit an. Auch kann er sich nicht selber ausschalten nach harten Landungen oder Unfällen wie ein herkömmlicher mechanischer Schalter.Super eingebautes BECDer weltweit erste Regler mit eingebauten Super Hochstrom BEC welcher eine max. Ausgangsleistung von bis zu 25A zur Verfügung stellen kann. Zudem ist die Ausgangsspannung einstellbar zwischen 6V & 7,4V. Das Hochstrom BEC wurde entwickelt um die aktuellen Hochstrom Servos auf Wunsch mit ausreichend Leistung zu versorgen und somit Großmodelle präzise steuern zu können.Plug & PlayStandardmäßig mit 6,5mm Goldkontakt Buchsen ausgestattet können die Stecker der meisten Brushless Motoren gleich in den Regler gesteckt werden. Auch Akkuseitig ist bereits der weitverbreitete Traxxas Stecker verlötet, somit entfällt in den meisten Fällen das lästige löten und der Regler kann gleich in Betrieb genommen werden.Großes EinsatzgebietDieser Regler kann in jedem 1/5 Modell ideal eingesetzt werden egal ob Buggy, Monster Truck, Short Course oder Truggy. So beispielsweise im HPI Baja, Losi 5T, Losi DBXL oder MCD Race Runner welche mit einem Konversion Kit auf Brushless umgebaut wurden. Er ist die ideale Wahl für High-End Modelle die stark gefordert oder aggressive betrieben werden.Nahezu wartungsfreiDer ganze Regler mit Ausnahme des Lüfters ist grundsätzlich Wartungsfrei. Es muss lediglich die Lüfterhaube abgenommen werden um den Lüfter bei Bedarf zu ersetzen. Es ist somit kein Öffnen des Gehäuses oder ähnlichem notwendig und der ganze Vorgang ist schnell und reibungslos zu bewerkstelligen. Zudem ist der Lüfter stoßfest designed worden um auch regelmäßige hohe Sprünge und harte Landungen ohne Schäden zu überstehen.Technische Daten Regler:Strom (Dauer/Spitze): 200A/1300AZellenzahl: LiPo: 3-8SNiMH: 9-24SBEC Spannung: 6-7,4V (einstellbar)Abmessung: 93,35x58,12x47,81mmGewicht: 342gAnwendung: 1/5 Touring Car, Buggy, Truggy, TruckTechnische Daten Motor:Typ: SensorlessPole: 4RPM/Volt 800kVAußendurchmesser: 56mmLänge: 113mmWellendurchmesser: 8mmAnwendung: 1/5 mit 3-8S LiPoLieferumfang:1x Regler1x Motor1x Manual (Englisch)
Hobbywing Ezrun MAX5 HV G2 Combo 250A 56118SD 800kV 6-12S LiPo
Hobbywing Ezrun MAX5 HV G2 combo for extreme 1:5 performanceThe Hobbywing MAX5 HV G2 combo combines a powerful 250A brushless ESC with the 56118SD G2 800kV motor. This system delivers maximum power, efficiency and control for large scale RC vehicles.More power and improved efficiency250A continuous and 1600A peak currentUp to 18 percent more power than previous generationReduced heat generationStrong acceleration and outputSensored system for precisionImproved sensored controlWaterproof sensor cableSmooth low speed controlAdvanced featuresSwitch mode BEC 6V 7.4V or 8.4V at 8ATurbo timing up to 24 degreesMotor overheat protectionData logging and 12 parameters56118SD G2 motor800kV output8S to 12S LiPo compatibleDurable 56mm designTechnical dataESC: 250A continuous 1600A peakInput: 6 to 12S LiPoMotor: 800kV sensored
Hobbywing Ezrun MAX8 G2S Combo 160A 4278SD 2250kV 3-6S LiPo
Hobbywing Ezrun MAX8 G2S combo for 1:8 performanceThe Hobbywing MAX8 G2S combo pairs a powerful 160A brushless ESC with the 4278SD G2R 2250kV motor. This system delivers outstanding performance and reliability for 1:8 scale RC vehicles.High power and efficiencyUp to 25 percent more power160A continuous and 1050A peak currentPerfect ESC and motor matchingExcellent throttle responseAdvanced features and protectionStrong BEC 6V 7.4V or 8.4V at 6ALow voltage and thermal protectionSignal loss protectionMotor overheat protectionDurable and versatileIP67 water and dust resistantRealtime data loggingTurbo timing support4278SD G2R motor2250kV output3S to 6S LiPo compatibleTechnical dataESC: 160A continuous 1050A peakInput: 3 to 6S LiPoMotor: 2250kV sensored
Ezrun MAX6 Combo SL 5687 1100kV Sensorless
Hobbywing Ezrun MAX6 G2 Combo 200A 5690SD 1250kV 3-8S LiPo
Hobbywing MAX6 G2 combo for 1:6 and 1:7 RC vehiclesThe Hobbywing MAX6 G2 combo pairs a powerful 200A brushless ESC with the 5690SD G2 1250kV motor. It is designed for high performance RC cars and delivers excellent power and control.High power performance200A continuous and 1200A peak currentSupports 3S to 8S LiPo batteriesHigh torque for strong accelerationIdeal for trucks and monster trucksModern technologyBuilt in Bluetooth for app controlData logging via smartphoneSensored system for smooth throttle responseDurable designWaterproof constructionStrong BEC 6V 7.4V or 8.4V at 8AMotor details1250kV output3S to 8S LiPo compatible
Xerun Axe540L R2 2300kv FOC Combo
Hobbywing Xerun Axe540L R2-2300kV FOC Combo for Rock CrawlerIntelligent torque and speed control for precise driving maneuvers!The XeRun AXE "R2" brushless controller, connected to an associated AXE "R2" motor, automatically regulates torque and speed depending on the load requirement. This technology is also called FOC (Field-Oriented Control) and is responsible for this really great driving experience.The XeRun AXE "R2" 540 motor with its 3.175mm shaft and 2300KV also contributes to this. With the built in staggered pole rotor design patented by Hobbywing, the 4-pole motor has hardly any detent torque and runs smoothly under all conditions. With the professional handbrake function, the car is now 100% immobile, even on the steepest slopes. The motor and controller are both connected via an improved waterproof, special sensor plug.The ESC also offers extensive setting options for all professionals. Connected via Bluetooth and APP, relevant data can be read out, settings changed or firmware updates carried out, everything is simple and easy.Technical Specifications ESC:Type: Brushless FOCCurrent cont./peak 80A/480ACells: 2s-3s LiPo, 6-9 Zellen NiMHMotor Limits: Only XeRun-AXE "R2" MotorsBEC: 6V/7.4V - 6AProgramming: Bluetooth and APP "HW LINK"Waterproof: YesDimensions: 47.4 x 36.2 x 26.5mmWeight: 108gApplication: 1/10 Rock CrawlerTechnical Specifications Motor:Type: Sensored Brushless FOCPoles: 4KV Rating: 2300KVLiPo Cells: 2-3sNo-Load Current: 2.5AOuter Diameter: 36.0mmLength: 49.8mmShaft Diameter: 3.175mmShaft Length: 16mmWaterproof: YesWeight: 185gApplication: 1/10 Rock CrawlerDelivery:1x ESC1x Motor1x Manual
Max10 G2 Combo 140A + 3665SD 3200kV G3
