Hobbywing Ezrun MAX10 G2S 80A Combo with Ezrun 3652SD G3 3300kV
€129.90
Available, delivery time: 1-4 days
PayPal 
Amazon Pay Pay Later 
Credit or debit card 
SEPA direct debit 
Bancontact 
BLIK 
eps 
iDEAL 
Multibanco 
OXXO 
Przelewy24 - Brushless combo for 1/10 scale: 80A ESC + 3300kV motor, factory matched
- Bluetooth programming via HW-LINK app, no additional device needed
- Turbo Timing up to 20 degrees - up to approx. 25% more top RPM
- Three-stage BEC: 6V / 7.4V / 8.4V at 5A
- ESC and motor waterproof to IP67
Product information "Hobbywing Ezrun MAX10 G2S 80A Combo with Ezrun 3652SD G3 3300kV"
Brushless Combo Hobbywing Ezrun MAX10 G2S 80A with 3652SD G3 3300kV for 1/10 Scale
This combo brings together the Ezrun MAX10 G2S speed controller at 80A and the Ezrun 3652SD G3 motor at 3300kV - a factory-matched Brushless drive package for 1/10 scale vehicles. The controller can be configured directly via smartphone: the Bluetooth module is integrated into the power switch, and the connection runs through the HW-LINK app for parameter tuning, data analysis, and firmware updates. Turbo Timing up to 20 degrees and the motor overheat protection are exclusively available with compatible Hobbywing motors and are ready to use out of the box with the included 3652SD G3.
Ezrun MAX10 G2S Features
- Bluetooth module integrated in the power switch - smartphone programming without any additional device
- Internal data logging of the last 10 minutes of driving, graphically viewable in the HW-LINK app
- Turbo Timing up to 20 degrees - up to approx. 25% higher top RPM with a compatible Hobbywing motor
- Three-stage BEC: 6V / 7.4V / 8.4V at 5A continuous current (switch mode)
- Frameless fan with side air outlet, temperature-controlled activation
- Controller and motor waterproof to IP67, with waterproof sensor cable
- Protection against low voltage, overheating, and signal loss; capacitor overheat protection
- XT60 input connector, gold-plated output connectors
Ezrun 3652SD G3 Motor Features
- Brushless sensored motor at 3300kV
- 4-pole rotor for high torque, fast acceleration, and stable power delivery
- CNC-machined aluminum housing with high-precision bearings
- Waterproof to IP67
- Suitable for 1/10 on-road and off-road short course truck (light-duty)
ESC Specifications
- Type: 1/10 Brushless, sensored and sensorless
- Current (continuous/peak): 80A / 520A
- Input voltage: 2-3S LiPo
- Motor limits: 2S LiPo KV <= 6000 / 3S LiPo KV <= 4200
- Dimensions: 53 x 39.5 x 37.2 mm / Weight: 125 g
Motor Specifications
- KV rating: 3300kV / No-load current: <= 3.9A
- Cell count: 2-3S LiPo / Poles: 4
- Length: 53 mm / Diameter: 37 mm / Shaft diameter: 3.175 mm
- Weight: 228 g
Included in the Box
- 1x Ezrun MAX10 G2S ESC 80A
- 1x Ezrun 3652SD G3 Motor 3300kV
Required Separately
- Battery: required separately (2S or 3S LiPo; at least 3S for 7.4V or 8.4V BEC output)
- Charger: required separately
Optional Accessories
- HW30502002 LCD Programming Box Pro
- HW30850400 OTA Bluetooth Programming Module
Login
Suitable accessories
Hobbywing LCD Programming Box Pro - Program Brushless ESCs with EaseThe multifunctional LCD Programming Box Pro allows fast and convenient programming of Brushless ESCs - on the go or at home. Via USB-C connection, the box can be connected to a computer for firmware updates. Additionally, the programming box measures the voltage of individual lithium cells or entire packs. Three outstanding functions in one compact device.Features of the Hobbywing LCD Programming Box ProHigh-contrast 2.8'' LCD display (approx. 7 cm) with 20 brightness levelsIntuitive operation via scroll wheelSave and upload ESC settingsBuilt-in battery tester for 1-8S batteries (2-8S LiPo/LiIon/LiFe, accuracy +/- 0.1V)Integrated Bluetooth, compatible with HW Link V2 app (iOS and Android)Connectors: USB Type-C, ESC, power supplyInput voltage: DC 5-12.6VSize: 105.6 x 59.2 x 24.4 mm, weight: 85 gCompatible ESCsXERUN Car ESCs: Version 2.0 and newerEZRUN Car ESCs: Version 2.0 and newerPLATINUM Helicopter/Flight ESCsSeaking Pro Boat ESCsSelected QUICRUN Car ESCsNote: Do not supply power to the programming box unless your ESC manual requires an external power supply. If the ESC has no integrated/external BEC, a separate battery is required.