TT-02

8x 5x10x4mm4x 5x11x4mm4x 8x12x3.5mm

Contents: 16 ball bearings, sealedPhoto for Reference Only!

This TT-02 chassis option part is a gear set featuring a newly-designed aluminum spur gear mount and spacer. It enables gear ratio settings from 9.82:1 to 6.55:1, and it can also be used in conjunction with a separately-sold 64T spur gear for lower gear ratios.• TT-02 spur gear-mount x1• 7x5x11.4mm spacer x1• FF-03 PRO spur gear (68T) x1• 2x9mm stainless steel shaft x1

These Tamiya blue anodized aluminum front and rear propeller joints are option parts designed for the TT-02 chassis. Like the TT-02 Aluminum Propeller Shaft (Item 54501), they reduce the power lost in the transmission from the stock resin parts.• TT-02 Aluminum propeller joints x2

These are low-friction step screws for use on the Tamiya TT-02 and TT-02B car chassis platform.These 3x18mm step screws replace those used as standard in the TT-02 chassis steering arms.The low-friction finish makes for more precise function.The hex heads on these screws match those seen in other option parts.Contains 3x18mm Step Screws x2 (enough to complete a single TT-02 chassis; note that theTT-02B chassis requires 4 screws.)A hex wrench is included to attach the screws.Compatible with TT-02 and TT-02B chassis.

These are low friction suspension balls that are designed to be used with the Tamiya TT-02 chassis. Compared to the standard plastic balls these are smoother and allow the suspension to move more freely.Low-friction material allows smoother suspension movement and improved performance.Contains Suspension Ball x4Compatible with the TT-02 & TT-02B chassis.

This set includes a hi-torque servo saver and dedicated TT-02 design aluminum servo horn to protect internal servo gears and give more direct steering feel to your car.- Hi-Torque Servo Saver (Black) x1 (#TA-300051000)- TT-02 Aluminum Servo Horn x1- Screws for attachment included.- Compatible with all TT-02 chassis variants.

This extra-large (XL) bumper is made from black urethane, as opposed to the gray bumpers used on many of Tamiya's on-road RC kits. Cut it to just the size you need for a perfect fit to your model's body!• Urethane Bumper (Black) x1• Bumper helps absorb shocks and lessen the chance of body damage.• Compatible with TT-02 and TT-01 Type-E chassis cars.

- These upper arms allow setting of camber angle between 0 and 2 degrees via adjustment of turnbuckle shaft.- Use Item 42236 when adjusting.Compatible ChassisTT-02, TT-02RR & TT-02D Chassis *Use with Item 53792 Assembly Universal Shaft (TT-01, TA04).

Tamiya is delighted to announce that the gear differential unit from the recently-released TT-02RR Chassis Kit (Item 47382) is to be released as its own Hop-Up Option part!- Glass fiber-reinforced Nylon Gear Case Parts x1- Gasket x1- Die-Cast Bevel Gears x4- Oil-filled gear differential units facilitate smooth, efficient drive. Use different grades of oil, gear diff putty, etc. to quickly adjust your setup.- Compatible with TT-02 series chassis (Item 53792 required for TT-02, TT-02D; Item 53791 required for TT02B).

Scope of delivery: Motor pinion (25 teeth)TT-02 Speed gearbox (68 Z)Oil pressure shock absorber set (4 pieces)Ball bearing set (16 pieces)