The next addition to our popular Hyper Go series: the Breaker ProDrift-1.4 with top-of-the-range equipment in 1:14 scale. Performance, body and driving characteristics set new standards in the vehicle category of this size. A 2845 3700KV brushless motor is available as the drive, which distributes its power to all four wheels via solid metal drive shafts. The built-in CVD shafts are mounted on ball bearings and ensure backlash-free transmission of power to the high-grip rubber tyres or drift tyres, which are included in the scope of delivery. Also made of metal are the chassis and gears as well as the differentials.For maximum control and fine-tuning of the Hyper Go Breaker ProDrift, adjustable oil-pressure metal shock absorbers, adjustable suspension and a driving stability system (gyro) are also included. The built-in 45A ESC provides sensitive response during acceleration and the built-in LED lighting with different modes also allows for drifts and on-road racing at dusk. The digital 17g steering servo also ensures good cornering control and stable directional stability. Thanks to the 2.4GHz system, operation with several vehicles at the same time is possible.As a small bonus, a Dust Cover (mud flap) is included, which is placed over the entire middle section inside the vehicle to prevent moisture, dirt and mud from penetrating as far as possible. For long driving times with maximum power, a 2000mAh 7.4V Li-Ion battery and a matching charger are included. The driving time is thus up to 12 minutes.HIGHLIGHTS:Maximum durability: thanks to high-quality metal chassis and metal drive components4WD drive with CVD drive shafts: Even better traction and direct power transmission to all wheelsFURTHER FEATURES:RTR version (ready-to-run) incl. remote control, battery, chargerFully ball bearing mounted vehicle for smooth drive performanceLED lightingPolycarbonate chassis dust coverSturdy metal main strut for added rigidityAdjustable metal oil pressure shock absorbersIndividual components consisting of ESC, servo, gyro and servo for easy repair and parts accessibilityAll plastic parts made of composite plastic for better durability TECHNICAL DATA:Scale: 1:14Length: 320mmWidth: 153mm Height: 115mmWeight: 1124g incl. batteryWheelbase: 190mmTrack width front: 128mmTrack width rear: 128mmGround clearance: 15mmFront wheels: Outer diameter/width 58/22mmRear wheels: Outer diameter/width 58/22mmRim diameter: 42mmFront shocks: 65mmRear shocks: 65mmBrake: ElectronicReceiver incl. Gyro function (driving stability system)ESC: 45A brushless Motor: 2845 3700KVDrive system: CardanDrive system: 4WDSteering servo: Digital 17gMain material: Metal / Composite plasticBattery compartment dimensions: 86 x 38 x 32mmBattery: Li-Ion, 2S 7.4V 2000mAh 15C, round cells, Deans connectorBattery dimensions: 70 x 36 x 20mmBattery weight: 99gRide time: 10-12minTop speed: 40-45km/hRemote control: 4-channel, 2.4GHzRange: 100-150mCharger: LiPo chargerSCOPE OF DELIVERY:ModelRemote controlBatteryChargerDrift tyresStreet tyresOff-road tyresGyroAccessoriesREQUIRED ACCESSORIES:2x 1.5V AA batteries for the remote control

Amewi Hyper GO Truggy brushless 4WD 1:14 RTR black The Hyper GO Truggy brushless 4WD 1:14 RTR delivers maximum performance and versatility for RC enthusiasts. Powered by a brushless motor, it reaches speeds of up to 55 km/h. The robust 4WD drivetrain ensures optimal traction and control, while the included wheelie bar and sand paddle tires add extra possibilities for stunts and off-road adventures. Main Features: Speed: Up to 55 km/h Drive: 4WD Motor: Brushless system for maximum power Additional Equipment: Wheelie bar and sand paddle tires Design: Black body with durable construction Technical Specifications: Scale: 1:14 Battery: 2S Li-Po (included) Runtime: Up to 20 minutes Charging time: Approx. 120 minutes Recommended age: 14+

Hyper GO Short Course Truck Brushless 4WD 1:14 RTR1:14 short course truck powered by a strong brushless system4WD drivetrain for maximum grip and controlAluminium oil shocks and durable suspension designRTR package – ready to run with transmitter, battery and chargerFor beginners and advanced drivers, top speed up to ~45 km/h

Monster Truck Hyper GO MTX14 - Brushless Power in 1:14 ScaleThe Hyper GO MTX14 is a fully equipped RTR monster truck in 1:14 scale with a brushless drive system and 4WD. The model is designed for drivers aged 14 and up and suits both beginners and experienced users thanks to its steplessly adjustable top speed. With a top speed of over 41 km/h and a 45A V2 brushless ESC, the MTX14 delivers sporty performance on virtually any terrain.Robust Construction and Metal Drive ComponentsDifferentials, main gear and CVD drive shafts are made of metal for maximum durability in tough off-road use. Metal skid plates at the front and rear stiffen the chassis and protect against damage. Front and rear suspension arms made of solid composite material combine stability with low weight. All components are fully ball-bearing mounted for smooth operation and efficient power transfer.Suspension and ElectronicsAdjustable oil-pressure shock absorbers (front 68 mm, rear 70 mm)Adjustable suspension with adjustable camber and toeNew brushless motor 2852 with 4400 kvNew 45A V2 brushless ESC for precise throttle responseNew standard-size digital steering servoSwitchable bright LED lights at the front2.4 GHz transmitter with 3 channels, dual rate for throttle and steering, plus reverse functionRange approx. 100 metersTechnical SpecificationsScale: 1:14Length: 330 mm / Width: 235 mm / Height: 140 mmWeight: 1552 g incl. batteryWheelbase: 200 mmTrack width front: 195 mm / rear: 190 mmGround clearance: 33 mmFront and rear wheels: outer diameter/width 85/47 mmRim diameter: 51 mmBattery compartment: 98 x 40 x 25 mmDrive system: metal driveshaftBrake: electronicMain material: composite plasticCompatible with 2S and 3S LiPoRun time: 12-15 minutes depending on terrainIncluded in DeliveryModel with body and quick-release fastener2.4 GHz 3-channel transmitter - includedLi-Ion battery 2S 7.4V 2000 mAh 20C softcase with Deans connector - includedUSB balancer charging cable 7.4V / 1.5A - includedWheelie barToolAdditionally Required4x 1.5V AA batteries for the transmitter (not included)

Hyper GO 10304 Polo R WRCThis 1:10 RC car offers rally and drift performance with brushless power and premium build quality.Performance3200KV brushless motor80A ESCUp to 70 kmh speedFeaturesGyro stabilizationLED lightsAluminum chassis

Hyper GO 10306 Mustang Shelby GT500This licensed 1:10 RC car combines realistic design with powerful brushless performance.Performance3200KV brushless motor80A ESCUp to 70 kmh speedFeaturesGyro stabilizationRTR ready to runDetailed body

MJX Hyper GO 14207 Offroad RC Truck with Brushless MotorThe MJX Hyper GO 14207 is a versatile 1:14 offroad RC truck with a powerful brushless motor, robust chassis and two included body shells. It is ideal for beginners and experienced RC enthusiasts looking for fun offroad on paths, gravel, forest floors and similar terrain.Features of the MJX Hyper GO 142071:14 scale with two detailed offroad body shells includedBrushless motor 2852 for powerful acceleration and speeds up to approx. 50-55 km/h4WD all-wheel drive for excellent grip on various surfacesOil-filled metal shock absorbers for smooth suspension on rough terrain2.4 GHz transmitter T3D with precise control and approx. 120 m rangeBrushless ESC E50RLiPo 2S 3000mAh batteryWeight approx. 1560 gIncluded in DeliveryMJX Hyper GO 14207 RC truck (RTR, ready to run)2 body shells2.4 GHz transmitter (included)LiPo 2S 3000mAh battery (included)Charger (included)ToolManual

MJX Hyper Go 14212 - 1/14 Brushless Truggy with Full Metal Drivetrain56 km/h top speed, 4WD and a full metal drivetrain - the MJX Hyper Go 14212 is a 1/14 scale hobby-grade truggy that fits anywhere. At 310 mm long with 94 mm tyres, it tackles backyards, gravel paths, dirt lots and grass. The 2852 Brushless motor pairs with the E45P 45A Brushless ESC, ready to run on 2S out of the box and upgradeable to 3S. An aluminium heatsink with fan and a waterproof receiver box ensure lasting performance.Top Features of the Hyper Go 14212 Brushless TruggyBrushless Power: 2852 Brushless motor with E45P 45A Brushless ESC, 2S-3S capable, up to 56 km/hFull Metal Drivetrain: Metal driveshafts, metal CVD axles, chrome steel gears, metal differential, full ball bearing setAluminium Oil-Filled Shock Absorbers: Oil-filled dampers all round for superior stability on rough terrainActive Motor Cooling: Aluminium heatsink with fan for stable performance during long full-throttle runsWaterproof Receiver Box: Electronics protected against puddles, wet grass and damp groundT3D 2.4GHz Radio: Fully proportional throttle and steering with trim, approx. 120 m range - includedTwo Body Shells: Both pre-painted - one mounted, one as spareTechnical SpecificationsScale: 1:14 | Drive: 4WDMotor: 2852 Brushless with aluminium heatsink and fanESC: E45P 45A Brushless (2S-3S capable)Steering Servo: 19g digital servo, 2.2 kg/cm, metal gearBattery: 7.4V 3000mAh 25C LiPo (included)Run Time: approx. 13 minutes | Charge Time: approx. 330 minutes (USB)Dimensions: 310 x 225 x 127 mm | Wheelbase: 198 mm | Track Width: 195 mmTyre Diameter: 94 mm | Weight: 1350 gPackage Contents and Additional RequirementsIncluded: Pre-assembled Hyper Go 14212 (RTR), 7.4V 3000mAh LiPo battery, T3D 2.4GHz transmitter, USB charging cable, second body shell, hex wrench, screwdriver, front and rear body mounts, front suspension arms (4x), 7-point wrench (3x), rear wing unit, wheelie bar, body clips (4x), damper springs (4x), manualAdditionally required: 2x AA batteries for the transmitter

MJX HYPER GO 14302 Lancia Delta - 1:14 Rally Drift Car with Brushless DriveThe MJX HYPER GO 14302 is an agile 1:14 rally and drift car featuring an officially licensed Lancia body and powerful brushless drive system. Metal differentials, full ball bearings and oil-filled metal shock absorbers deliver precise, controlled handling on smooth tarmac as well as on grippier rally surfaces. With a 3S battery, speeds of up to 60 km/h are achievable.Features1:14 4WD rally and drift car with officially licensed Lancia bodyBrushless drive: 2845 motor (3700KV) and 45A ESC (2S/3S compatible)Metal differentials and full ball bearings for high durabilityOil-filled metal shock absorbers for confident handlingDust-protection cover over the electronicsLED light system front and rearFully proportional 2.4 GHz radio systemTwo tyre sets: road tyres and drift slicks (4 pieces each)Range up to 120 mTechnical SpecificationsScale: 1:14Drive: 4WDSpeed: approx. 42 km/h (2S) / up to 60 km/h (3S)Motor: Brushless 2845, 3700KV (aluminium heatsink and fan)ESC: 45A Brushless (2S/3S compatible)Servo: Digital servoBattery: 7.4 V 2000 mAh LiPo (2S, included)Run time: approx. 15 min. (depending on surface and driving style)Range: min. 120 mLighting: LED front and rearRadio: 2.4 GHz, fully proportionalTyres: road tyres and drift slicks (4 pieces each)Included in the BoxMJX HYPER GO 14302 (RTR, assembled and ready to run)2.4 GHz radio transmitter (included)7.4 V 2000 mAh LiPo battery (included)USB charging cable (included)TPR tyre set - 4 piecesDrift tyre set - 4 piecesHex wrench and screwdriverManual

MJX Hyper GO 14303 Citroen C3 WRC - Brushless Rally Drift Car 1:14The MJX Hyper GO 14303 in 1:14 scale is an agile rally and drift car featuring brushless power and modern electronics. The robust chassis, full-metal drivetrain components and oil-filled metal shock absorbers ensure precise handling on smooth tarmac as well as on grippier rally tracks. With the pre-installed gyro, the 2845 brushless motor (approx. 3700 KV) and 45A ESC, the model reaches a top speed of up to 43 km/h.Features1:14 4WD rally/drift car with smooth drift tyres and rubber tyres (three tyre sets included)Brushless drive: 2845 motor (approx. 3700 KV) with 45A ESC and cooling fanPre-installed gyro for stable driving behaviourMetal differentials and full ball bearings for high durabilityOil-filled metal shock absorbers for controlled handlingDust protection cover over the electronicsLED lighting system front and rearFull-proportional 2.4 GHz radio systemTechnical SpecificationsScale: 1:14Drive: 4WDTop speed: up to approx. 43 km/h (with 2S battery)Motor: Brushless 2845, approx. 3700 KV (with fan)ESC: 45A BrushlessServo: 17g digital servo (approx. 2.4 kg)Battery: 7.4 V 2000 mAh (2S)Run time: approx. 13 minutesRange: approx. 120 mDimensions (L x W x H): 320 x 153 x 115 mmLighting: LED front and rearRemote control: 2.4 GHz, full-proportionalPackage ContentsMJX Hyper GO 14303 Citroen C3 WRC (RTR, ready to run)2.4 GHz remote control (included)Three different tyre sets7.4 V 2000 mAh battery (included)USB charging cable (included)Tool and manual

MJX Hyper GO 14304 Volkswagen Polo R WRC - Brushless Rally/Drift Car 1:14The MJX Hyper GO 14304 is an agile 1:14 rally/drift car featuring a brushless drivetrain, pre-installed gyro and fully proportional 2.4 GHz radio system. The robust chassis with all-metal drivetrain components and oil-filled aluminium shock absorbers delivers precise handling on tarmac and rally surfaces alike. With a top speed of up to 43 km/h and a 45A brushless ESC, the model offers powerful acceleration and finely controllable steering.Technical SpecificationsScale: 1:14, Drive: 4WDMotor: Brushless 2845, 3700KV (with cooling fan)ESC: 45A BrushlessServo: 17g Digital Servo (approx. 2.4 kg)Battery: 7.4 V 2000 mAh (2S)Run time: approx. 13 min., Range: approx. 120 mTop speed: up to approx. 43 km/h (with 2S)Dimensions (L x W x H): 320 x 153 x 115 mmLED lighting front and rearRadio: 2.4 GHz, fully proportionalFeaturesPre-installed gyro for stable driving behaviourMetal differentials and full ball bearings for high durabilityOil-filled metal shock absorbers for controlled handlingDust protection cover over the electronicsThree tyre sets: slick drift tyres and rubber tyres includedIncluded in the BoxMJX Hyper GO 14304 (RTR, ready to run)2.4 GHz radio transmitter (included)Three different tyre sets7.4 V 2000 mAh battery (included)USB charging cable (included)Tool and manual

MJX Hyper GO 16213 - 1:16 Brushless Buggy with Full Metal SetupThe MJX Hyper GO 16213 is a premium 1:16 4WD off-road buggy featuring brushless power and a full metal drivetrain setup. The powerful 2845 brushless motor combined with the 45A ESC delivers explosive acceleration, while four pre-installed metal differentials ensure precise handling. Two included tire sets make this buggy equally capable on tarmac and loose terrain.Features of the Brushless BuggyBrushless drive: 2845 motor with E45A2 45A brushless ESCFull metal drivetrain: metal CVD shafts, metal differentials, sintered metal gearsMetal oil-filled shock absorbers, independently tuned front and rearMetal front and rear bumpers for maximum durabilityAerodynamic body with rear wing for stability at high speedsWheelie bar with 3-point mountingFull ball bearing set for long service lifeT3D 2.4 GHz radio system, fully proportionalTechnical SpecificationsScale: 1:16Drive: 4WDMotor: Brushless 2845ESC: E45A2 45A BrushlessServo: 17g digital servoBattery: 2S LiPo 7.4V 2000 mAhRadio: T3D 2.4 GHz, fully proportionalRange: approx. 100-120 mShock absorbers: full metal, oil-dampedBattery connector: T-plugIncluded in the BoxMJX Hyper GO 16213 (RTR) - ready to run, pre-assembledT3D 2.4 GHz transmitter (included)2S 2000 mAh LiPo battery (included)USB charger (included)Two tire sets: on-road and off-roadTwo body shellsWheelie bar, rear wing, tools and manualPlease note: Batteries for the transmitter are not included and must be purchased separately.Optional AccessoriesSpare battery: 2S MX-B2S20Optional 3S battery for even higher top speed

MJX Hyper GO 18208 - 1:18 Offroad RC Truck with 4WD and Brushed MotorThe MJX Hyper GO 18208 is a versatile 1:18 offroad RC truck for beginners and experienced RC enthusiasts alike. Equipped with a powerful brushed motor, a robust chassis and 4WD, it handles trails, gravel, forest floors and various terrain with ease. Two different body shells are included, allowing you to personalise the look of your truck.Features of the Hyper GO 182081:18 scale with detailed offroad body shellBrushed motor P18138S for powerful acceleration4WD for reliable grip across different terrain types2.4 GHz transmitter T3E for precise control with approx. 80-100 m rangeCompatible with 2S LiPo batteries - top speed of approx. 30 km/hRobust chassis and stable suspension components for lasting fun2-in-1 ESC for easy operationIncluded in the BoxMJX Hyper GO 18208 RC truck (RTR - ready to run)2x 2S LiPo drive batteries (included)1x charger (included)2x body shell2.4 GHz transmitter T3ETool and manualAdditionally RequiredBatteries for the transmitter (please refer to manual, not included)

MJX Hyper GO 7304 Volkswagen Polo R WRC - 1:7 Rally RC Car with Brushless DriveThe MJX Hyper GO 7304 in Volkswagen Polo R WRC design is a powerful 1:7 rally and drift RC car with a sensored brushless drive system. The metal chassis, fully metal drivetrain components and heavy-duty suspension combine high-speed performance with rugged rally capability. Featuring a 3974 sensored brushless motor (approx. 2500 KV), a 120A ESC and a 35 kg metal servo, the model reaches speeds of up to 60 km/h - perfect for adrenaline-fuelled drift manoeuvres and aggressive rally runs.Features of the MJX Hyper GO 73041:7 4WD rally/drift car in Volkswagen Polo R WRC design3974 sensored brushless motor (approx. 2500 KV) for smooth power delivery120A ESC with independent cooling via heat sink and fan35 kg metal servo for precise, high-torque steeringMetal drivetrain parts: driveshafts, CVD axles, gears - durable and robustIndependent front and rear suspension with oil-filled shock absorbers2.4 GHz radio system with 120 m range4WD with metal differentials front, centre and rearTechnical SpecificationsScale: 1:7Speed: up to approx. 60 km/h (with 4S LiPo)Motor: 3974 Sensored Brushless, approx. 2500 KVESC: 120A, independent, with heat sink and fanServo: 35 kgWeight: approx. 4943 g (without battery)Dimensions (L x W x H): 632 x 290 x 237 mmWheelbase: 375 mmTrack width: 265 mmTyre diameter: 103 mmDrive: 4WD with metal differentials (front/centre/rear)Radio: 2.4 GHz, 120 m rangePackage ContentsMJX Hyper GO 7304 RC car (ready assembled)2.4 GHz radio transmitter (included)Mounted rally tyresSecond set of tyresTool set (hex keys)ManualRequired SeparatelyBattery: 4S LiPo battery (not included, required separately)Charger: not included, required separately

MJX Hyper GO H18P - Brushless Mini Crawler with Ford Bronco R BodyThe MJX Hyper GO H18P is a highly detailed 1:18 scale crawler featuring an officially licensed Ford Bronco R Baja 1000 ABS body. Its Brushless drive system with a 1606 4200KV motor, three selectable drive modes, and full metal portal axles make it a technically advanced mini crawler ready for demanding terrain.Brushless Drive System and Drive ModesBrushless motor 1606 with 4200KV for powerful accelerationBrushless ESC precisely matched to the 1606 motorFWD (front-wheel drive, rear axle freewheeling) for high speed and agile cornering4WD for maximum traction on all surfacesDIG (rear axle locked, front-wheel drive) for tightest turning radius and extreme climbingChassis and FrameSolid metal roll cage tube frame for added protection and scale appearanceFull metal axles with portal bridge gear reductionMetal links and tie rodsFull ball bearings9G servo for precise steeringGround clearance: approx. 25 mmIncluded in the BoxMJX Hyper GO H18P (RTR, ready to run)2.4 GHz transmitter (included)7.4V 500 mAh 15C LiPo battery (included)USB charging cable (included)Tool and manual

MJX Hyper GO H8E - 1:8 Scale Crawler with Sensored Brushless DriveThe MJX Hyper GO H8E is an impressive 1:8 scale crawler in a classic pickup truck style, featuring a detailed orange ABS body. A robust metal ladder frame, all-metal portal axles and a 2-speed gearbox switchable via the remote control make it a true all-rounder between scale crawler and basher.Sensored Brushless Drive of the H8EAt its core is a 3970 2000KV sensored brushless motor combined with an 80A FOC sensored brushless ESC - the perfect foundation for smooth acceleration, fine torque during crawling and plenty of power in high-speed mode. In low gear the H8E reaches approx. 7.5 km/h (2S) or 11 km/h (3S), in high gear approx. 17 km/h (2S) or 25 km/h (3S).Features and Chassis of the H8EPortal bridge axles (gate bridge) for maximum ground clearance4-link suspension with tail Watt linkage at the rear for optimal axle articulationFront and rear differential with remote-switchable differential lock35 kg digital steering servo for precise steering even under loadLED front headlights and side auxiliary lights (scale lighting)Robust metal ladder frame with front guard and rear roll bar in scale look2.4 GHz 8-channel remote control with a range of at least 120 mPackage ContentsMJX Hyper GO H8E (ready to run)2.4 GHz 8-channel remote control (included)Hex wrench and screwdriverManualRequired Separately2S or 3S LiPo battery (not included)Compatible LiPo charger (not included)3 x AA batteries for the remote control (not included)