Servo

Stellgeschwindigkeit: 0.09sec/40° 4.8VStellkraft: 6.6kg/cm 4.8V

Fast and strong all-round servo!ERS-951 Digital Servo (11.0kgcm/0.06s/40 6V)SpecificationsWeight: 59gSize: 40.3x20.2x35.9mmSpeed at 6.0V: 0.06s/40°Torque at 6.0V: 11.0kg/cmMetal gear: YesAluminium heat sink: Yes

SRG PGS-CX HighTorque Type Servo 0,11sec/26,5kg

· Baugröße - Standard · Betriebsspannung: 6.0-8.4V · Stellkraft 25,0 Kg @ 7,4V · Stellzeit 0,16 Sec / 60° @ 7.4V · Getriebe - Metall · Motortyp: Core · Zahnkranz - 25 Zähne · Stecksystem - JR · Kabel: 22AWG, 260mm · Kugellager: 2 · Gewicht: 56g · Gesamtmaß (L/B/H): 55.0x 20.0x46.0mm · Einbaumaß (L/B/H): 40.0x 20.0x42.0mm · Lochabstand: 48.6mm

· Baugröße - Standard · Betriebsspannung: 6.0-8.4V · Stellkraft 35,0 Kg @ 7,4V· Stellzeit 0,22 Sec / 60° @ 7.4V· Getriebe - Metall · Motortyp: Core · Zahnkranz - 25 Zähne · Stecksystem - JR· Kabel: 22AWG, 260mm · Kugellager: 2· Gewicht: 56g · Gesamtmaß (L/B/H): 55.0x 20.0x46.0mm· Einbaumaß (L/B/H): 40.0x 20.0x42.0mm· Lochabstand: 48.6mm

Features : Einsatzbereich Auto & Flug - Bautyp - Standard - Maße (LxBxH) 40mm x 20mm x 37,7mm - Betriebsspannung 6.0 Volt = Stellzeit 60° - 0,085 Sec. / Stellkraft (Ncm) 150 / Stellkraft (Kg) 15 - Betriebsspannung 7.4 Volt = Stellzeit 60° - 0,07 Sec. / Stellkraft (Ncm) 200 / Stellkraft (Kg) 20 - Betrieb mit 6.0 Volt bis 7.4 Volt - Gewicht 77 g- Servogetriebe aus extrem robustem Gütestahl - Brushlessmotor - 2 Kugellager - Gehäuse - Kunststoff & Aluminium - Zahnkranz 25 Zähne - Lieferumfang - Servoarm und Befestigungsmaterial

Operating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 30.0kg / 0.175sec/60°Torque / Speed @ 6.0V: 37.0kg / 0.145sec/60°Torque / Speed @ 7.4V: 44.0kg / 0.130sec/60°Torque / Speed @ 8.4V: 50.0kg / 0.115sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6Waterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40*20*37.5 mmWeight: 80,5 gProgrammable: Yes with USB Interface Adapter # ABS-2030110 (sold separately)

Operating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 10.0kg / 0.078sec/60°Torque / Speed @ 6.0V: 13.0kg / 0.068sec/60°Torque / Speed @ 7.4V: 14.5kg / 0.062sec/60°Torque / Speed @ 8.4V: 16.0kg / 0.056sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6Waterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40.8*20.2*26.5 mmWeight: 61,0 gProgrammable: Yes with USB Interface Adapter # ABS-2030110 (sold separately)

Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used. Fields of application for our "Race Spec. Servos" is the competition, but also for ambitious "club racers" and hobby drivers these servos are fantastic! TECHNICAL DATA HIGHLIGHTS: Servo Category: High-SpeedOperating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 14.0kg / 0.080sec/60°Torque / Speed @ 6.0V: 15.0kg / 0.072sec/60°Torque / Speed @ 7.4V: 16.5kg / 0.065sec/60°Torque / Speed @ 8.4V: 17.5kg / 0.058sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6 - CNC machined with plastic inlayWaterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40*20*37.5 mmWeight: 73,0 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately)

Operating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 25.0kg / 0.140sec/60°Torque / Speed @ 6.0V: 29.0kg / 0.120sec/60°Torque / Speed @ 7.4V: 35.0kg / 0.105sec/60°Torque / Speed @ 8.4V: 40.0kg / 0.098sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6 - CNC machined with plastic inlayWaterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40*20*37.5 mmWeight: 73,0 gProgrammable: Yes with USB Interface Adapter # ABS-2030110 (sold separately)

Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used. Fields of application for our "Race Spec. Servos" is the competition, but also for ambitious "club racers" and hobby drivers these servos are fantastic! TECHNICAL DATA HIGHLIGHTS: Servo Category: High-Speed / Low ProfileOperating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 9.0kg / 0.082sec/60°Torque / Speed @ 6.0V: 12.0kg / 0.073sec/60°Torque / Speed @ 7.4V: 13.0kg / 0.065sec/60°Torque / Speed @ 8.4V: 15.0kg / 0.060sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6 - CNC machined with plastic inlayWaterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40.8*20.2*27.2 mmWeight: 54,2 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately)

Operating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 13.0kg / 0.105sec/60°Torque / Speed @ 6.0V: 16.0kg / 0.090sec/60°Torque / Speed @ 7.4V: 18.0kg / 0.080sec/60°Torque / Speed @ 8.4V: 19.0kg / 0.070sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6 - CNC machined with plastic inlayWaterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40.8*20.2*27.2 mmWeight: 54,2 gProgrammable: Yes with USB Interface Adapter # ABS-2030110 (sold separately)

Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.This version has an enormous actuating power, which is up to 34 kg by direct connection of a 3S or 4S LiPo battery and all this at a speed of 0.080 seconds! In addition, the servo is dust and waterproof (IP67) and can therefore be used in all weather conditions. Our "Crawler Spec. Servos" are mainly used in 1:8 and 1:10 crawlers or other heavy vehicles which need a lot of power on the steering axle. TECHNICAL DATA HIGHLIGHTS: Servo Category: High-Torque & High SpeedOperating Voltage: 7.4 - 16.8V HVTorque / Speed @ 12V: 48.0kg / 0.120sec/60°Torque / Speed @ 14.4V: 54.0kg / 0.100sec/60°Torque / Speed @ 16V: 60.0kg / 0.095sec/60°Torque / Speed @ 16.8V: 62.0kg / 0.090sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6Waterproof Rating: IP67 water-proofBearing: Metal ball bearings (2)Servo Arms: 1* Aluminum, 2* PlasticSize: 40*20*41.5 mm (Standard)Weight: 88,2 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately)ATTENTION: Separate power supply (2S,3S or 4S LiPo with BEC / JST connector) necessary!

This USB adapter is only applicable for ABSIMA programmable servos marked with SMART SERVO. suitable for the following programmable Absima servos:ST23DBF Team Spec.ST50DBT Team Spec.LP16DBF Team Spec.LP20DBT Team Spec.ST18DBF Race Spec.ST40DBT Race Spec.LP15DBF Race Spec.LP19DBT Race Spec.LP34DBT Crawler Spec.System Requirements1. operating voltage: USB(5V/500mA).2. operating system: Windows XP/Windows Vista/Windows 7/Windows 8/Windows10 ( 32/64bit).3. application: ABSIMA programmable servos with "SMART SERVO" marking. THE NECCESSARY SOFTWARE CAN BE FOUND HERE ABOVE IN THE "DOWNLOAD" TABParameter Einstellungen: 1. Servo-Angle: set the servo rotation angle.2. Servo-Neutral: Adjust the servo neutral position Note: If the transmitter rotates to the neutral position and the servo does not stay in the appropriate position, you can change this value to adjust the servo horn. This is equivalent to trimming the transmitter channel. 3. PWM Power: Set the servo output power. The higher the output power, the higher the servo torque and the speed, but also the power consumption is higher.4. Damping factor: Set the damping of the servo.5. Sensitivity: Set the deadband (sensitivity) of the servo.6. Soft Start: Slow recovery when the servo is turned on. As soon as the servo is switched on, it will rotate smoothly to the position of the current input signal. Note: This function is used to prevent damage caused by incorrect mounting of the servo when switching on.7. Inversion: Setting of normal and reverse rotation of the servo.8. Narrow Band: FUTABA SR-Modus9. SANWA SSR: SANWA SSR-Modus. Note: Enable this function to support the SANWA SSR high speed mode. The servo angle may not be accurate, it needs to be readjusted.10. Lose PPM Protection: Signal loss protection, there are three functions to choose from: a. Release: Non-Protection b. Maintain position: Remains in the position before the signal loss c. Neutral position: Back to neutral position (1500uS position)11. Overload protection: Set the servo blocking protection. There are three levels, which are activated by ticking: Stage 1: Set the start time and power value of the primary protection. Stage 2: Setting the start time and power value of the secondary protection. Stage 3: Setting the start time and the power of the tertiary protection. Note: The left side is used to set the protection start-up time, the right side is used to set the output power after the start-up protection is activated.12. Servo-Informationen: Servo-informationen. including servo model, version date and firmware-name. Servo Name: Servo-Model Manufacture: Date of servo version Firmware: Servo firmware name THE NECCESSARY SOFTWARE CAN BE FOUND HERE ABOVE IN THE "DOWNLOAD" TAB

Operating frequency: 1520 / 330HzMotor: HQ Core MotorSpeed (4,8V): 0,11sec/60°Speed (6,0V): 0,09sec/60°Actuating force(4,8V): 8,58kg/cmactuating force (6,0V): 9,53kg/cmDimensions: 40.9 x 20.3 x 26.5mmWeight: 44,3gConnection cable length: 265mmBall bearing: 2BBGear: metalHousing: aluminium/plastic

The digital standard servo for vehicles in scale 1:8 and 1:10.Equipped with a metal gearbox and partial aluminium housing.>Technical data:Operating frequency: 2us 1520us / 330hzSpeed (4.8V): 0.09 sec/60°Speed (6V): 0. 07 sec/60°Actuating force (4.8V): 6.8 kg.cmActuating force (6V): 8.2 kg.cmDimensions: 40.5x20.2x38mmWeight: 62 gConnecting cable length JR 265 mmBall bearing: 2BBGearbox: metalSupply:ServoAccessory bag

AMX Racing 5508MG Digital Servo Standard BB MG 0,07s/8,2kg- This revolutionary digital standard servo of the AMX-Racing Servo series is extremely reliable, powerful and very resistant.- The robust steel gearbox as well as the favourable price speak for themselvesTechnical Data- Working frequency: 1520 / 330hz- Speed (4.8V): 0.09sec/60°.- Speed (6V): 0.07sec/60°.- Actuating force(4,8V): 6,8kg/cm- Actuating force (6,0V): 8,2kg/cm- Dimensions: 40,5 x 20,2 x 38mm- weight: 55,6g- Connection cable length: 265mm- Ball bearing: 2BB- Gearbox: Metal

You are looking for some powerful controlWe developped these servos with the racer in mind, ultimate digital power, precision and reliable.Check out these awesome featuresFeatures- Full CNC machined alloy case- High Voltage 6.0 - 8.4V- Titanium gears- Ball Raced- Coreless motor- Ultra high speed and torque- Water resistantTech SpecsVoltage range 6.0 - 8.4VSpeed @ 6.0V 0.07 sec/60°Speed @ 7.4V 0.06 sec/60°Speed @ 8.4V 0.05 sec/60°Torque @ 6.0V 11.8 kg/cmTorque @ 7.4V 14.4 kg/cmTorque @ 8.4V 16.5 kg/cmDimensions (mm) 40.5x20.5x36Weight 72gSpline size: 25T Spline

Team Corally - Zahnräder Satz Corally CS-5226

Input Voltage (V): 6.0V - 8.4VWeight (g): 73 gServo Type / Size: StandardLength (mm): 40.0 mmGear Material: Steel GearsWidth (mm): 20.0 mmBall Beared: Ball BearedMotor Type: Coreless MotorHeight (mm): 37.0 mmServo Case: CNC alloyServo Power - Torque Kg/cm: > 25 Kg/cmServo Speed 60°/sec: 0.05 - 0.10 Sec/60°Speed 60°/Sec @ 6.0V: 0.12 Sec/60°Speed 60°/Sec @ 7.4V: 0.11 Sec/60°Speed 60°/Sec @ 8.4V: 0.10 Sec/60°Torque kg/cm @ 6.0V: 37.5 Kg/cmTorque kg/cm @ 7.4V: Kg/cmTorque kg/cm @ 8.4V: 46.9 Kg/cmConnector type: JRSpline size: 25T SplineWater Protection: water resistant

Features:- Full CNC machined alloy case- Digital LHV 5.0 - 8.4V- Metal gears- Ball Raced- Core DC motor- High speed and torque- IP67 WaterproofTech. Specs:Voltage range 5.0 - 8.4VSpeed @ 6.0V 0.15 sec/60°Speed @ 7.4V 0.13 sec/60°Speed @ 8.4V 0.11 sec/60°Torque @ 6.0V 17.7 kg/cmTorque @ 7.4V 23.6 kg/cmTorque @ 8.4V 27.3 kg/cmDimensions (mm) 40.4x20.4x36.7Weight 75g / 2.55oz