Crawler/Scaler

We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the ESC. In addition, a programming card is available, which can be used for even more settings. HIGHLIGHTS:One ESC for all vehicle types (Crawler, Off-road, On-road, Boot)Programmable via jumper and separately available programming card (Item: 2110061)2-3S LiPo capableContinuous load: 80ABEC: 5A / 6.0VProgrammable Features (via programming card): Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Leicht zu programmieren durch Jumper und Programmierkarte im Taschenformat (separat erhätlich - Art. 2110061)Specification:Continuous/short time load: 80A/320AResistance: 0.0014ohmMotor type: Brushed standard motors Battery: 2-3S LiPo / 5-9 cells NiMHBEC 6.0V/5AMotor Limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25,000rpm.Motor Limit 3S LiPo/7-9 cells NiMH: ≥ 18T or <17,000U/min.Cable lengths: BEC: 180mm / Motor: 200mm / Power: 200mmDimensions: 41.5*35*29.5mmWeight: 63.4gScope of delivery:1:10 Brushed Speed Controller V2Adhesive TapeManual

This set is specially designed for new beginners and intermediate modelers. It not only carries forward the outstanding quality of ABSIMA (powered by HOBBYWING) products but simplifies the operation. FEATURES:- Water-proof and dust-proof for all weather races- Small size with built-in capacitor module- Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection- Easily programmed with "jumpers"SPECIFICATION:- Application: On-road/Off-road- Cont. / Burst Current - forward: 40A / 180A- Cont. / Burst Current - reverse: 20A / 90A- Input: 2-3S LiPo / 5-9 Cells NiMH- Battery "Low-Power" Cut-off: NiMH 4.5V / 2S LiPo 6.5V / 3S LiPo 9.75V- Motor Limit 2S LiPo/5-6 Cells NiMH: 540 or 550 Motor =12T or RPM <30.000 @ 7.2V- Motor Limit 3S LiPo/7-9 Cells NiMH: 540 or 550 Motor =18T or RPM <20.000 @ 7.2V- Maximum Reverse Force: 50% - Overheat Protection: 100°- Resistance: Fwd: 0.002 Ohm, Bwd: 0.004 Ohm- Built-in BEC: 2A/6V (Linear Mode BEC)- Plug System: Tamiya- Plug & Drive System: yes- On/Off Switch: yes- Dimmension (L/W/H): 46.5x34.0x28x5 mm- Weight: 70gSPECIFICATION MOTOR:- Turns: 14x2T- RPM: 26.300- Continuous Current: 160W- Operation V: 7.2V-7.4V- Motor size: 540- Shaft length: 12,3mm- Shaft diameter: 3,19mm- Motor length: 53,2mm- Motor diameter: 35,7mm- Brushess & Springs changeable: yes- Application: TruckSCOPE OF DELIVERY:- WP1040 Brushed ESC- 14T Electric Truck Motor- Manual

We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)Programmable via jumper and separately available programming card (Item 2110061)2S LiPo operation recommendedMotor ready soldered - plug-n-playProgrammable features (via programming card):Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features ESC:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)Specification ESC:Continuous/short-term load: 80A/320AResistance: 0.0014ohmSuitable motor types: Brushed standard motors Battery recommendation: 2S LiPo / 6 cells NiMHBEC 6.0V/5AMotor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM Measure: 41.5*35*29.5mmPlug system: T-plugWeight: 63.4gSpecification B-Spec Motor:Turns: 14TSpeed: 26.300RPMOutput power: 160WOperating voltage: 7.2-7.4VTechnical Size: 540Motor shaft: Length 12,3mm; Durchmesser: 3,18mm Motor size: Length 53,2mm; Durchmesser: 35,7mm Ball bearings: 2Weight: 165gLieferumfang:1:10 Brushed V2 Speed ControllerThrust B-Spec Brushed MotorAdhesive TapeManual

We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)Programmable via jumper and separately available programming card (Item 2110061)2S LiPo operation recommendedMotor ready soldered - plug-n-playProgrammable features (via programming card):Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features ESC:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)Specification ESC:Continuous/short-term load: 80A/320AResistance: 0.0014ohmSuitable motor types: Brushed standard motors Battery recommendation: 2S LiPo / 6 cells NiMHBEC 6.0V/5AMotor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM Measure: 41.5*35*29.5mmPlug system: T-plugWeight: 63.4gSpecification B-Spec Motor:Turns: 17TSpeed: 28.800RPMOutput power: 155WOperating voltage: 7.2-7.4VTechnical Size: 540Motor shaft: Length 12,3mm; Durchmesser: 3,18mm Motor size: Length 53,2mm; Durchmesser: 35,7mm Ball bearings: 2Weight: 165gLieferumfang:1:10 Brushed V2 Speed ControllerThrust B-Spec Brushed MotorAdhesive TapeManual

This set is specially designed for new beginners and intermediate modelers. It not only carries forward the outstanding quality of ABSIMA (powered by HOBBYWING) products but simplifies the operation. FEATURES:- Water-proof and dust-proof for all weather races- Small size with built-in capacitor module- Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection- Easily programmed with "jumpers"SPECIFICATION:- Application: On-road/Off-road- Cont. / Burst Current - forward: 40A / 180A- Cont. / Burst Current - reverse: 20A / 90A- Input: 2-3S LiPo / 5-9 Cells NiMH- Battery "Low-Power" Cut-off: NiMH 4.5V / 2S LiPo 6.5V / 3S LiPo 9.75V- Motor Limit 2S LiPo/5-6 Cells NiMH: 540 or 550 Motor =12T or RPM <30.000 @ 7.2V- Motor Limit 3S LiPo/7-9 Cells NiMH: 540 or 550 Motor =18T or RPM <20.000 @ 7.2V- Maximum Reverse Force: 50% - Overheat Protection: 100°- Resistance: Fwd: 0.002 Ohm, Bwd: 0.004 Ohm- Built-in BEC: 2A/6V (Linear Mode BEC)- Plug System: Tamiya- Plug & Drive System: yes- On/Off Switch: yes- Dimmension (L/W/H): 46.5x34.0x28x5 mm- Weight: 70gSPECIFICATION MOTOR:- Turns: 55x2T- RPM: 7.700- Continuous Current: 85W- Operation V: 7.2V-7.4V- Motor size: 540- Shaft length: 12,3mm- Shaft diameter: 3,19mm- Motor length: 53,2mm- Motor diameter: 35,7mm- Brushess & Springs changeable: yes- Application: TruckSCOPE OF DELIVERY:- WP1040 Brushed ESC- 55T Electric Truck Motor- Manual

35 turns7.2 voltMotor size 540Shaft length: 8,6mmShaft diameter 3,19mmMotor length 54mmMotor diameter 35,7mm

45 turns7.2 voltMotor size 540Shaft length: 8,6mmShaft diameter 3,19mmMotor length 54mmMotor diameter 35,7mm

Features: - 55x2 Turns- 7.700 U/min- 85 Watt- 7.2 - 7.4V- Baugröße 540- Wellen-Länge 12,3mm- Wellendurchmesser: 3,17mm- Motor Länge: 53,2mm- Motor Durchmesser: 35,7mm

Verkehrskegel aus KunststoffMaße: 82 mm Höhe, Standfläche Durchmesser: 75 mmFarbe: orangeStapelbarLieferumfang: 4 St. Verkehrskegel

Einsatzbereich: Universelles GestaltungstoolMaterial: KunststoffFarbe Hammer: gelb / schwarz ( lackiert )Farbe Axt: silber / schwarz ( lackiert )Länge Axt 23mm / Länge Hammer 23mmGewicht Beil 2 g / Gewicht Hammer 2 gLieferumfang: 1 St. Axt und 1 St. Hammer

Roll nicht weg !Einsatzbereich: Crawler / TruckMaterial: AluminiumFarbe: rot / schwarzLänge: 33 mm / Höhe 20 mmRutschhemmende GummiunterlageGewicht: 13 gLieferumfang: 2 St. Unterlegkeile

Metal head & shaftFits for 1:10 Crawler, Truck and Offroad ModelsMeasure: Length 70 mmWeight 27g

Metal pick & shaftFits for 1:10 Crawler, Truck and Offroad ModelsMeasure: Length 68 mmWeight 15g

Individuelles und universelles Gestaltungstool für alle ModelleMaße: 40 x 28 x 16 mmLieferumfang: 1 St. Benzintank und Halterung

Einsatzbereich: Universelles GestaltungstoolMaterial: KunststoffFarbe: schwarzMaße: Höhe 47 mm / Durchmesser: 40 mmGewicht: 8 gLieferumfang: 1 St. Ölfaß

Size: 30x20 mm

Holt dich da wieder raus !Einsatzbereich: CrawlerMaterial: AluminiumFarbe: Chrom rot / schwarzLänge je Ankerarm: 42mmGesamtlänge 60mmGewicht: 11 gLieferumfang: 1 St. Windenanker

Wenn es mal nicht mehr alleine gehtEinsatzbereich: CrawlerMaterial: StahlFarbe: silber / rotGesamtlänge 84,8mmGewicht: 9 gLieferumfang: 1 St. Stahlkabel mit 2 St. Schwerlasthaken

Krabbelhilfe - einhaken, los geht'sEinsatzbereich: CrawlerMaterial: StahlFarbe: rotMaße Befestigungsplatte 13x13mmLochabstand Befestigungsplatte 10mmLänge Halteösen 16mmGewicht je: ca. 6 gLieferumfang: 2 St. Halteösen inkl. Schrauben

1/10 RC Rock Crawler Accessories 96cm Long Chain and Hook Set Red

Einsatzbereich: CrawlerMaterial: StahlFarbe: rotLänge je Haken: 28mmGewicht je Haken: 9 gLieferumfang: 2 St. Haken und Schrauben

Einsatzbereich: CrawlerMaterial: Nylon StretchFarbe: schwarzGrundlänge gesamt: 105 mmGurtlänge: 80 mmMax. Auszugslänge: 200 mmLieferumfang: 3 St. Befestigungsgurte elastisch mit Haken