1:10 Short-Course
RC Brushless Sets 1:10 Short-Course
Sidewinder 4 Basher Combo 1406-5700k
SW4 SENSORLESS ESC BASHER EDITION W / 1406-4600 SENSOR READY MOTOR- 2s - 3s LiPo; 6 - 8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run.- Sensorless brushless and/or brushed motor operation.- Waterproof design ESC and splash resistant 30MM fan*- 5.0 volts fixed, 2 amps Peak BEC- Audible alerts for error conditions- Enhanced drag brake functionality- Smoother sensorless startups- Convenient transmitter programming for six common adjustable settings- Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (sold separately) or via Field Link Card (sold separately)- Telemetry Link compatible for Futaba® S.BUS2 (sold separately)The 1406-4600kv motor is a great motor for 2WD short course trucks on 2s LiPo and geared conservatively. It makes a great combo for 1/10th 2WD Stadium trucks and buggies on 2s for general bashing and limited runs on 3s; temperatures will climb quickly on 3s. It makes a great upgrade for 1/10th scale on-road cars for 2s and 3s use. NOT for use in 4WD short course trucks. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market.
Sidewinder 4 SCT Combo 1410-3800k
SW4 WP SENSORLESS ESC SCT EDITION W / 1410-3800 SENSOR READY MOTOR- 2s - 3s LiPo; 6 - 8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run.- Sensorless brushless and/or brushed motor operation.- Waterproof design ESC and splash resistant 30MM fan*- 5.0 volts fixed, 2 amps Peak BEC- Audible alerts for error conditions- Enhanced drag brake functionality- Smoother sensorless startups- Convenient transmitter programming for six common adjustable settings- Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (sold separately) or via Field Link Card (sold separately)- Telemetry Link compatible for Futaba® S.BUS2 (sold separately)The 1410-3800kv is perfect for short course trucks running on 2s LiPo and weighing up to 6.5 lbs; it can be run on a 3s LiPo with very conservative gearing. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 3s LiPo.
Samurai Pro-SCT Combo 5150kv Waterproof
ESC:Cont. Current: 120ABurst Current: 760ASuitable: 1:10 Short Course CarMotor Type: 2 Pol senorless Brushless Motor up to 5150kVNiMh: 5-12 CellLipo/LiFE/Li-Ion: 2-4 CellBEC Output: 6.0/7.4V 7ASize: 51x37x33mmWeight: 90g
Hobbywing Ezrun MAX10 G2S 80A Combo with Ezrun 3652SD G3 3300kV
Brushless Combo Hobbywing Ezrun MAX10 G2S 80A with 3652SD G3 3300kV for 1/10 ScaleThis combo brings together the Ezrun MAX10 G2S speed controller at 80A and the Ezrun 3652SD G3 motor at 3300kV - a factory-matched Brushless drive package for 1/10 scale vehicles. The controller can be configured directly via smartphone: the Bluetooth module is integrated into the power switch, and the connection runs through the HW-LINK app for parameter tuning, data analysis, and firmware updates. Turbo Timing up to 20 degrees and the motor overheat protection are exclusively available with compatible Hobbywing motors and are ready to use out of the box with the included 3652SD G3.Ezrun MAX10 G2S FeaturesBluetooth module integrated in the power switch - smartphone programming without any additional deviceInternal data logging of the last 10 minutes of driving, graphically viewable in the HW-LINK appTurbo Timing up to 20 degrees - up to approx. 25% higher top RPM with a compatible Hobbywing motorThree-stage BEC: 6V / 7.4V / 8.4V at 5A continuous current (switch mode)Frameless fan with side air outlet, temperature-controlled activationController and motor waterproof to IP67, with waterproof sensor cableProtection against low voltage, overheating, and signal loss; capacitor overheat protectionXT60 input connector, gold-plated output connectorsEzrun 3652SD G3 Motor FeaturesBrushless sensored motor at 3300kV4-pole rotor for high torque, fast acceleration, and stable power deliveryCNC-machined aluminum housing with high-precision bearingsWaterproof to IP67Suitable for 1/10 on-road and off-road short course truck (light-duty)ESC SpecificationsType: 1/10 Brushless, sensored and sensorlessCurrent (continuous/peak): 80A / 520AInput voltage: 2-3S LiPoMotor limits: 2S LiPo KV <= 6000 / 3S LiPo KV <= 4200Dimensions: 53 x 39.5 x 37.2 mm / Weight: 125 gMotor SpecificationsKV rating: 3300kV / No-load current: <= 3.9ACell count: 2-3S LiPo / Poles: 4Length: 53 mm / Diameter: 37 mm / Shaft diameter: 3.175 mmWeight: 228 gIncluded in the Box1x Ezrun MAX10 G2S ESC 80A1x Ezrun 3652SD G3 Motor 3300kVRequired SeparatelyBattery: required separately (2S or 3S LiPo; at least 3S for 7.4V or 8.4V BEC output)Charger: required separatelyOptional AccessoriesHW30502002 LCD Programming Box ProHW30850400 OTA Bluetooth Programming Module
Hobbywing Ezrun MAX10 G2S 80A Combo with Ezrun 3652SD G3 4100kV
Brushless Combo Ezrun MAX10 G2S 80A with 3652SD G3 4100kV for 1/10The Hobbywing Ezrun MAX10 G2S combo pairs the 80A Brushless ESC MAX10 G2S with the Brushless motor 3652SD G3 (4100kV) in a factory-matched drivetrain package for the 1/10 scale. Programming is done directly via smartphone through the HW-LINK app with no additional devices required. Exclusively with Hobbywing motors: Turbo Timing up to 20 degrees for up to approx. 25% higher maximum RPM.Brushless ESC Ezrun MAX10 G2S - HighlightsBluetooth module integrated in the switch - programming, data analysis and firmware update via HW-LINK appInternal data logging of the last 10 minutes of drive time, graphically viewable in the appTurbo Timing up to 20 degrees - activatable exclusively with Hobbywing motorsBEC with three levels: 6V / 7.4V / 8.4V at 5A (switch mode) - 8.4V for high-voltage servosFrameless fan with side air outlet, temperature-controlled activationProtection functions: low voltage, overheat, signal loss, capacitor overheat protectionWaterproof to IP67, including waterproof sensor cableInput XT60, output gold-plated connectors; dimensions: 53 x 39.5 x 37.2 mm; weight: 125 gBrushless Motor Ezrun 3652SD G3 - Highlights4100kV, 4-pole rotor for high torque and fast accelerationCNC-machined aluminium housing, high-precision bearingsWaterproof to IP672-3S LiPo, no-load current max. 5.0A; length 53 mm, diameter 37 mm, shaft 3.175 mm; weight: 228 gApplication: 1/10 on-road / off-road short course truck (light-duty)Package Contents1x Ezrun MAX10 G2S Brushless ESC 80A1x Ezrun 3652SD G3 Brushless Motor 4100kVAdditionally RequiredBattery: 2-3S LiPo (not included); note: a minimum 3S battery is required for 7.4V or 8.4V BEC outputCharger: not includedOptional AccessoriesHW30502002 LCD Programming Box ProHW30850400 OTA Bluetooth Programming Module
Hobbywing Ezrun MAX10 G2S 80A Combo with Ezrun 3652SD G3 5400kV
Brushless Combo Hobbywing Ezrun MAX10 G2S 80A with 3652SD G3 5400kV for 1/10The Hobbywing Ezrun MAX10 G2S Combo pairs the 80A Brushless ESC MAX10 G2S with the Brushless motor Ezrun 3652SD G3 at 5400kV into a factory-matched drive system for 1/10 scale. The integrated Bluetooth module in the power switch enables programming, data analysis and firmware updates directly via smartphone through the HW-LINK app - no additional devices required. Internal data logging records the last 10 minutes of driving time for graphical analysis. Turbo Timing up to 20 degrees increases maximum RPM by up to approx. 25% and is exclusively available with Hobbywing motors. Both ESC and motor are dust- and waterproof to IP67.Key Features of the Brushless ESC Ezrun MAX10 G2SBluetooth module integrated in the power switch: smartphone programming via HW-LINK app, no extra hardware neededInternal data logging of the last 10 minutes of drive time, graphically analysable in the HW-LINK appTurbo Timing up to 20 degrees - up to approx. 25% more maximum RPM with a compatible Hobbywing motor3-step BEC: 6V, 7.4V and 8.4V at 5A in switch mode (8.4V for high-voltage servos)Frameless fan with side air outlet, temperature-controlled activationProtection features: capacitor overheat protection, low-voltage cutoff, signal-loss protectionWaterproof to IP67, with waterproof sensor cableInput voltage: 2-3S LiPo; current: 80A continuous / 520A peakDimensions: 53 x 39.5 x 37.2 mm; weight: 125 g incl. cables and connectorsConnectors: XT60 input, gold-plated bullet outputKey Features of the Brushless Motor Ezrun 3652SD G3Brushless sensored motor at 5400kV for precise control4-pole rotor for high torque, fast acceleration and stable power deliveryCNC-machined aluminium housing and high-precision bearingsWaterproof to IP67Shaft diameter: 3.175 mm; length: 53 mm; diameter: 37 mm; weight: 227 gNo-load current: max. 6.8A; designed for 2S LiPoESC Technical SpecificationsType: 1/10 Brushless, sensored and sensorlessInput voltage: 2-3S LiPoMotor limits: 2S LiPo KV max. 6000 / 3S LiPo KV max. 4200 (3652/3665 motors)Programming: Bluetooth (HW-LINK app), LCD programming box, OTA programming moduleApplication: 1/10 on-road, buggy, rally and short course truckPackage Contents1x Ezrun MAX10 G2S ESC 80A1x Ezrun 3652SD G3 motor 5400kVOptional AccessoriesLCD Programming Box Pro (HW30502002)OTA Bluetooth Programming Module (HW30850400)Note: A minimum 3S battery is required for 7.4V or 8.4V BEC output. Bluetooth range is approx. 5 m by design. Battery and charger are not included.
Hobbywing Ezrun MAX10 G2S 140A Combo with Ezrun 3665SD G3 3200kV
Brushless Combo Ezrun MAX10 G2S 140A with 3665SD G3 3200kV for 1/10The Hobbywing Ezrun MAX10 G2S combo pairs the 140A ESC with the Ezrun 3665SD G3 Brushless motor in a factory-matched drive system for 1/10 short course trucks, trucks and monster trucks. The MAX10 G2S is programmed via Bluetooth directly through the HW-LINK app - no additional programming device required. The Bluetooth module is integrated into the switch and enables parameter setup, data analysis and firmware updates via smartphone. With Turbo Timing up to 32 degrees, the maximum RPM increases by up to approx. 25 % when used with the included Hobbywing motor. Both components are dust- and waterproof to IP67.Brushless ESC Ezrun MAX10 G2S - HighlightsBluetooth module integrated into the switch - programming via HW-LINK app, no extra device neededInternal data logging of the last 10 minutes of driving time, graphically displayed in the appTurbo Timing up to 32 degrees - up to approx. 25 % higher top RPM with Hobbywing motorThree-stage BEC: 6V / 7.4V / 8.4V at 5A (switch mode) for high-voltage servosInput: XT60, output: gold-contact connectorsFrameless fan with side air outlet, temperature-controlled activationProtection: low voltage, overheat, signal loss, capacitor overheatIP67 waterproof, dimensions: 53 x 39.5 x 37.2 mm, weight: 125 gCompatible with 2-4S LiPoBrushless Motor Ezrun 3665SD G3 - HighlightsBrushless sensored motor with 3200kV and 4-pole rotorHigh torque for fast acceleration and consistent power deliveryCNC-machined aluminium housing with high-precision bearingsIP67 waterproof, shaft diameter 5 mm, weight 304 gCompatible with 2-3S LiPoPackage Contents1x Ezrun MAX10 G2S ESC 140A1x Ezrun 3665SD G3 Motor 3200kVAdditionally RequiredLiPo battery (2-4S, minimum 3S for 7.4V / 8.4V BEC output) - sold separatelyCharger - sold separatelyOptional AccessoriesHW30502002 LCD Programming Box ProHW30850400 OTA Bluetooth Programming Module
Hobbywing Ezrun MAX10 G2S 140A Combo with Ezrun 3665SD G3 4000kV
Brushless Combo Ezrun MAX10 G2S 140A with 3665SD G3 4000kV for 1/10 ScaleThis factory-matched Brushless combo pairs the Ezrun MAX10 G2S ESC at 140A with the Ezrun 3665SD G3 motor at 4000kV for 1/10 scale vehicles. The integrated Bluetooth module in the switch allows direct smartphone programming via the HW-LINK app - no additional devices required. Turbo Timing up to 32 degrees boosts maximum RPM by up to approx. 25% and is exclusively available with Hobbywing motors. Both ESC and motor are dust- and waterproof to IP67, including a waterproof sensor cable.Brushless ESC Ezrun MAX10 G2S - SpecificationsContinuous / Peak current: 140A / 880AInput voltage: 2-4S LiPoBEC: 6V / 7.4V / 8.4V adjustable, 5A continuous (switch mode)Turbo Timing up to 32 degreesProgramming via Bluetooth (HW-LINK app), LCD programming box or OTA moduleInternal data logging of the last 10 minutes of driving timeThird BEC level at 8.4V for high-voltage servosFrameless fan with side air outlet, temperature-controlled activationProtection against low voltage, overheating and signal lossWaterproof to IP67, XT60 input, dimensions: 53 x 39.5 x 37.2 mm, weight: 125 gBrushless Motor Ezrun 3665SD G3 - SpecificationsType: Brushless, Sensored, 4-poleSpeed: 4000kV, no-load current max. 8.2ACell count: 2-3S LiPoCNC-machined aluminium housing, high-precision bearingsLength: 65.8 mm, diameter: 37 mm, shaft diameter: 5 mm, weight: 297 gWaterproof to IP67Suitable for: 1/10 Short Course Truck, Truggy / MonsterIncluded in Delivery1x Ezrun MAX10 G2S ESC 140A1x Ezrun 3665SD G3 Motor 4000kVRequired SeparatelyBattery: required separately (2-4S LiPo for ESC; 2-3S LiPo recommended for motor)Charger: required separatelyNote: A minimum 3S battery is required for 7.4V or 8.4V BEC outputOptional AccessoriesHW30502002 LCD Programming Box ProHW30850400 OTA Bluetooth Programming Module
1:10 SCT-Combo 80A/3660SL/2750kV/2-3S
TECHNICAL DATA MOTORMotor shaft: 5mm (diameter) / 18mm (length)Motor KV: 2750 (Umin/V)Lipo Cell count: 2-3SPoles: 4Type: SensorlessConnector system: 4mm Gold contact PlugMotor length: 60mmMotor diameter: 36mm (outside)Weight: approx. 256g>EMPOSED APPLICATION1/10 Monster1/10 Truggy & Trucks1/10 Short Course1/10 4WD BuggySupply Scope:80A Konect controller by HobbyWing2750kv / 3660SL Brushless motor by HobbyWingLCD programming card by HobbyWingProgramming cable for connecting the programming card to the controllerManual