Ezrun

The second generation of the Ezrun Max10 ESCs with 140A brings with it a variety of innovations and optimizations that make driving 1/10 short courses and trucks even more enjoyable. For example, the improved sensor mode with accompanying waterproof cable provides great throttle response - especially when paired with an Ezrun 3652/3665 G3 motor. Compared with the previous generation, MAX10 G2 also has stronger power and more stable output power. At the same time, of course, this brings excellent linearity even at low speeds.In terms of heat development, no other ESC can beat the MAX10 G2 so quickly. Thanks to an innovative protection system, the capacity of the capacitors has also been increased by 74% and are at the same time protected against overheating. Ultimately, this ensures better power transmission from the battery to the controller and overcharging is less likely than before.Technical SpecificationsType: 1/10 Brushless SensoredCurrent (cont./peak): 140A / 880AInput Voltage: 2-4S LiPoBEC: 6V/7.4V, 5AMotor Types: Brushless Motors (with/without sensor)Motor Limits: 3S LiPo: KV<=4000 - 3665er Motor4S LiPo: KV<=2600 - 4268er MotorFan: Yes, powered by BECFan Size: 30x30x10mmProgramming: LED Program CardLCD Program Box (G2)OTA Program ModuleSeperate Programming PortWaterproof: YesInput: XT60Output: 4.00mm Gold (female)Dimensions: 53x39.5x37.2mmWeight: 120gApplication: 1/10 Short Course Truck, Truck and Monster TruckOptional Accessories:HW30501003 LED Program CardHW30502001 LCD G2 Program BoxHW30850400 OTA Program Module

The second generation of the Ezrun Max10 ESCs with 80A brings with it a variety of innovations and optimizations that make driving 1/10 short courses and trucks even more enjoyable. For example, the improved sensor mode with accompanying waterproof cable provides great throttle response - especially when paired with an Ezrun 3652/3665 G3 motor. Compared with the previous generation, MAX10 G2 also has stronger power and more stable output power. At the same time, of course, this brings excellent linearity even at low speeds.In terms of heat development, no other ESC can beat the MAX10 G2 so quickly. Thanks to an innovative protection system, the capacity of the capacitors has also been increased by 74% and are at the same time protected against overheating. Ultimately, this ensures better power transmission from the battery to the controller and overcharging is less likely than before.Technical SpecificationsType: 1/10 Brushless SensoredCurrent (cont./peak): 80A / 520AInput Voltage: 2-3S LiPoBEC: 6V/7.4V, 5AMotor Types: Brushless Motors (with/without sensor)Motor Limits: 2S LiPo: KV<= 60003S LiPo: KV<= 4200 3652 MotorFan: Yes, powered by BECFan Size: 25x25x10mmProgramming: LED Program CardLCD Program Box (G2)OTA Program ModuleSeperate Programming PortWaterproof: YesInput: XT60Output: 4.00mm Gold (female)Dimensions: 53x39.5x37.2mmWeight: 120gApplication: 1/10 On-Road/Off-Road Short Course Truck (light-duty)Optional Accessories:HW30501003 LED Program CardHW30502001 LCD G2 Program BoxHW30850400 OTA Program Module

The Ezrun MAX8 G2 ESC is the next evolutionary step for all 1:8 on-roaders and trucks and is just as coveted as its predecessor. The dynamic specifications perfectly meet the modern needs of performance-hungry drivers. Strong output power along with excellent low-speed linearity in full-sensored mode are the top selling points for the Ezrun MAX8 G2.Thanks to the built-in 32° turbo timing, You can even increase the maximum speed by 25% if a suitable motor such as the Ezrun 4278SD is being used. Enjoy the ride and defy all weather conditions. Because the implementation of the IP-67 standard in the design also makes the ESC extremely dustproof and waterproof. However, You only get full safety when using a motor that can be connected via the newly designed sensor cable. Equipped with a smart technology developed by Hobbywing, the MAX8 G2 can also further effectively increase performance at a low temperature. A whole 25°C less than the regular MAX8 controller is possible.FeaturesGreat flexibility & versatilityNew sensor cable designSuitable for all weather conditionsAdvanced and safe electronic switchSuper built-in BECLarge built-in capacitorsReal-time data & data recording possibleLarge area of applicationPlug & playAlmost maintenance freeTechnical Specifications:Current cont./peak: 160A/1050AMotor Type: Brushless, Sensored and SensorlessMotor Limits Brushless: 4S Lipo: KV=3000; 6S Lipo: KV=24004278 sized MotorLiPo: 3-6S LiPoBEC Output: 6V / 7.4V / 8.4V with 10A (adjustable)Fan: Yes (powered with the internal BEC)Programming Input: Fan-InputESC Programming: LCD G2 Program BoxLED Program BoxOTA Programming ModuleDimensions: 60x48x40.5mmWeight: 192gApplications: 1/8 On-Road, Short Course Truck and Monster Truck

The Ezrun MAX8 G2S controller is just as powerful as the MAX8 G2. Suitable for all 1:8 scale on-roaders and trucks and just as versatile in its programming options. The only difference is in the programming itself, because the G2S has an integrated Bluetooth signal, making any accessories superfluous for programming. All that is needed now is a smartphone with the Hobbywing app "HWLink2”.The dynamic specifications of the controller perfectly meet the modern needs of performance-hungry drivers. The strong output power together with the excellent linearity at low speed in full-sensored mode are the top arguments in favor of the Ezrun MAX8 G2S. Thanks to the built-in 32° turbo timing, you can even increase the maximum speed by 25% if you use a suitable motor such as the Ezrun 4278SD. Enjoy the ride and defy all weathers. The implementation of the IP-67 standard in the design also makes the controller extremely dust and waterproof. However, you only get full safety when using a motor that can be connected via the newly developed sensor cable. Equipped with a smart technology developed by Hobbywing, the MAX8 G2S can also effectively increase performance at a low temperature. As much as 25°C less than the regular MAX8 controller is possible, making failures less likely.Technical dataType: Brushless, SensoredCurrent (continuous/short): 160A / 1050AInput voltage: 3-6S LiPoBEC: 6V / 7.4V / 8.4V at 6A (switch mode)Motor types: Brushless motors (with and without sensor)Motor limit: 4S: <=3000kV6S: <=2400kV, 4278 motorFan: Yes, operated via the BECConnections: XT90 connector6.0mm bullet socketProgramming: iOS / Android smartphoneDimensions: 60 x 48 x 40.5mmWeight: 192gSuitable vehicles: 1/8 on-road, short course truck, monster truckContentsEzrun MAX8 G2S controllerManual (English) Stickers & mounting accessories

Ezrun MAX5 ESC Sensorless 200 Amp, 3-8s LiPo, BEC 6A

Hobbywing Ezrun MAX5 HV G2 ESC Sensorless 250 Amp, 6-12s LiPo, BEC 8A The EzRun MAX5 HV G2 is an impressive brushless ESC with high-voltage capability. With support for up to 12s LiPo and a maximum output current of 250A, it delivers explosive power and excellent linearity. Thanks to intelligent freewheel technology, the controller remains relaxed and cool even during demanding driving manoeuvres. This controller is protected against water and dust according to the IP 67 standard. Of course, this also makes the MAX5 HV G2 suitable for use in all weather conditions and allows it to operate on various surfaces such as mud, sand, ice, snow and water without damaging the power unit. With a powerful built-in BEC, anti-spark design and multi-directional protection, this ESC offers advanced functions and high safety. The EzRun MAX5 HV G2 is the ideal choice for RC enthusiasts looking for maximum potential and reliability. The operational status can even be monitored by recording and storing real-time data. And the upgrade of the sensor cable interface greatly improves the protection and waterproof performance of the ESC. With perfect compatibility with Hobbywing's EzRun 56118 SD G2 motor, this power system offers an unbeatable team for optimal performance and protection against overheating.Features Now with even more performance than its predecessor Water-proof and dust-proof for all-weather races. (Note: please uninstall the cooling fan before using this ESC in water; Clean and dry it soon after the use for avoiding the connectors get rusty.)  Built-in ultra-strong switching mode BEC to address a wide variety of servos. Includes turbo timing adjustment. Especially recommended with the right motor (e.g. EZRUN 56118SD G2). Multiple protections: battery low voltage protection, ESC and motor overheat protection, signal loss protection, current protection. Supports LED program box, LCD-G2 program card and the OTA programming module to set the controller parameters more easily. Data logging function to view various running data on HW LINK app using OTA Bluetooth module. Supports controller firmware upgrade (requires multi-function LCD-G2 program box or OTA programming module to purchase). 12 adjustable parameters. Technical Specifications Type: 1/5 Brushless Sensored Current (cont./peak): 120A / 760A Input Voltage: 6-12S LiPo BEC: 6V/7.4V/8.4V @8A (Switch Mode) Motor Types: Brushless Motors (with/without sensor) Motor Limits: - 8S Lipo: KV <= 1200 - 12S Lipo: KV <= 800 56118 size motor Fan: Yes, powered by BEC Programming: LED Program CardLCD Program Box (G2)OTA ProgrammerSeperate Programming Port Waterproof: Yes Input:   Output: 8.00mm Bullet Connector (female) Dimensions: 94.5x59.4x50.9mm Weight: 428.5g Application: 1/5 Buggy, Truck Delivery: Ezrun MAX5 HV G2 ESC Optional Accessories: HW30501003 LED Program Card HW30502001 LCD G2 Program Box HW30850400 OTA Programmer

Ezrun MAX6 Regler Sensorless 160A 3-8s LiPo BEC 6A

The evolution of the Ezrun series is progressing and the 3652SD G3 motor is characterized by its plus in performance and efficiency. Consistent power and high performance make throttle control in terms of maneuvers (e.g. power wheelies, jumps and more) noticeably easier. The waterproof cable for connecting to the ESC and the high-quality workmanship also protect the motor from water and dust (according to the IP67 standard).FeaturesRedesigned sensor cable for better protection against water and dust4-pole rotor for high torque, quick acceleration and stable performanceLess heat generationCNC machined aluminum housingHigh-precision bearings for high durability and smooth runningTechnical SpecificationsType: Brushless, SensoredkV Rating: 4100kVNo-Load Current: <=5.0ACells LiPo: 2-3SPoles: 4Length: 53mmDiameter: 37mmShaft Length: -Shaft Diameter: 3.175mmWeight: 228gApplication: 1/10 On-Road / Off-Road Short Course Truck (Light-Duty)

The evolution of the Ezrun series is progressing and the 3652SD G3 motor is characterized by its plus in performance and efficiency. Consistent power and high performance make throttle control in terms of maneuvers (e.g. power wheelies, jumps and more) noticeably easier. The waterproof cable for connecting to the ESC and the high-quality workmanship also protect the motor from water and dust (according to the IP67 standard).FeaturesRedesigned sensor cable for better protection against water and dust4-pole rotor for high torque, quick acceleration and stable performanceLess heat generationCNC machined aluminum housingHigh-precision bearings for high durability and smooth runningTechnical SpecificationsType: Brushless, SensoredkV Rating: 5400kVNo-Load Current: <=6.8ACells LiPo: 2SPoles: 4Length: 53mmDiameter: 37mmShaft Length: -Shaft Diameter: 3.175mmWeight: 227gApplication: 1/10 On-Road / Off-Road Short Course Truck (Light-Duty)

The evolution of the Ezrun series is progressing and the 3665SD G3 motor is characterized by its plus in performance and efficiency. Consistent power and high performance make throttle control in terms of maneuvers (e.g. power wheelies, jumps and more) noticeably easier. The waterproof cable for connecting to the ESC and the high-quality workmanship also protect the motor from water and dust (according to the IP67 standard).FeaturesRedesigned sensor cable for better protection against water and dust4-pole rotor for high torque, quick acceleration and stable performanceLess heat generationCNC machined aluminum housingHigh-precision bearings for high durability and smooth runningTechnical SpecificationsType: Brushless, SensoredkV Rating: 3200kVNo-Load Current: <=7.1ACells LiPo: 2-3SPoles: 4Length: 65.8mmDiameter: 37mmShaft Length: -Shaft Diameter: 5mmWeight: 304gApplication: 1/10 Short Course Truck, Truggy/Monster

The evolution of the Ezrun series is progressing and the 3665SD G3 motor is characterized by its plus in performance and efficiency. Consistent power and high performance make throttle control in terms of maneuvers (e.g. power wheelies, jumps and more) noticeably easier. The waterproof cable for connecting to the ESC and the high-quality workmanship also protect the motor from water and dust (according to the IP67 standard).FeaturesRedesigned sensor cable for better protection against water and dust4-pole rotor for high torque, quick acceleration and stable performanceLess heat generationCNC machined aluminum housingHigh-precision bearings for high durability and smooth runningTechnical SpecificationsType: Brushless, SensoredkV Rating: 4000kVNo-Load Current: <=8.2ACells LiPo: 2-3SPoles: 4Length: 65.8mmDiameter: 37mmShaft Length: -Shaft Diameter: 5mmWeight: 297gApplication: 1/10 Short Course Truck, Truggy/Monster

The Ezrun 4268 G2 motor is the powerful solution for 1/8 scale off-road and truck models - especially when combined with the matching MAX8 G2 ESC, which can increase the speed of this motor by an additional 25%. Thanks to its durable construction and innovative new design, it simply makes it the heart of the car.Features:Redesigned sensor cable for better protection against water and dust4-pole rotor for high torque, quick acceleration and stable performanceLow heat generationCNC machined aluminum housingHigh-precision bearings for high durability and smooth runningEasily dismantled for maintenance workTechnical Specifications:Type: Brushless, SensorlesskV Rating: 2500kVNo-Load Current: 4.8ALiPo cells: 3-4SPoles: 4Length: 68mmOuter Diameter: 42mmShaft Length: 18.5mmShaft Diameter: 5mmWeight: 355gApplication 1/8 Off-Road,1/10 Truck, CrawlerDelivery:1x Motor1x Manual

Ezrun SL 56118SD G2 800kV 4pol, 8mm Shaft for 1:5

Ezrun SL 56118SD G2 1100kV 4pol, 8mm Shaft for 1:5

This LED program box is for programming HobbyWing brushless ESCs. Its friendly interface makes ESC programming easy and quick.It's compact, portable and very applicable for field use.It works with the following HobbyWing products:- Platinum V1/V2 series & FlyFun V5 series of brushless aircraft ESCs.- XeRun series (some XeRun ESCs, please take the instructions of relevant user manuals as standard.), EzRun series & QuicRun series of brushless car ESCs.- SeaKing series of brushless boat ESCs.

Sensor converter cable with JST connector, suitable for sensored brushless motors (z.B. Ezrun MAX8 G2, MAX4 HV). This cable is characterized by its particularly high water protection (according to the IP67 standard). Note: No thermal motor protection.

Der rahmenlose Zyklon-Lüfter basiert auf dem patentierten Kühlsystem-Design von Hobbywing und erzeugt durch sein Aussehen einen besseren Luftstrom als herkömmliche Lüfter. Dabei verbraucht er im Vergleich sogar weniger bis maximal gleich so viel Energie. Das Ergebnis ist klar: Der Regler bleibt kühl und arbeitet in einem optimalen Zustand.Technische SpezifikationenSpannungsbereich: 6-8,4VAnschluss: ZH-SteckerWasserdicht: neinGröße: 30x30x10mmEinsatz: MAX8 G2S

2x XT90 plug

Die Ezrun Serie bietet zahlreiche sensorlose Brushless Systeme für ambitionierte Hobby Racer und die es noch werden wollen. Sie sind die optimale Wahl wenn es darum geht deine RTR Austattung gegen hochwertige Elektronik mit viel Unterhaltungsgehalt auszutauschen.Der Max5 ist die perfekte Wahl für Monstertrucks im Maßstab 1/5 die mehr Leistung wollen. Geeignet für bis zu 8S LiPos kann er das maximalste aus allen sensorlosen Motoren holen. Das extrem Leistungsstarke BEC versorgt den Empfänger als auch die Servos mit mehr als genügend Leistung. Der elektrische Schalter ist extrem Robust und zuverlässig, dank des speziellen Kühlsystems läuft der Regler immer in einem optimalen Temeperaturbereich.Das Set besteht aus folgenden Komponenten:Regler Ezrun MAX5 200A 3-8s für 1/5Elektromotor Ezrun SL 56113 800kV für 1/5Features:Für alle Wetterbedingungen geeignetHervorragend gegen Wasser und Staub abgedichtet machen diesen Regler zu einer Waffe bei jedem Wetter oder unter jeden Bedingungen. Egal ob extrem staubige Pisten, regennasse Fahrbahn, Schnee, Pfützen oder Schotter, mit dem MAX5 geht es immer weiter.Fortschrittlicher und sicherer elektronischer SchalterDieser elektronischer Schalter hat eine Lebenszeit von mehr als 50.000 Schalvorgängen und ist zudem komplett Wasser- & Staubdicht und besitzt zudem ein stoßfestes Design. Hierdurch gehören Probleme wie rostige Kontaktstellen oder Feuchtigkeit im Schalter der Vergangenheit an. Auch kann er sich nicht selber ausschalten nach harten Landungen oder Unfällen wie ein herkömmlicher mechanischer Schalter.Super eingebautes BECDer weltweit erste Regler mit eingebauten Super Hochstrom BEC welcher eine max. Ausgangsleistung von bis zu 25A zur Verfügung stellen kann. Zudem ist die Ausgangsspannung einstellbar zwischen 6V & 7,4V. Das Hochstrom BEC wurde entwickelt um die aktuellen Hochstrom Servos auf Wunsch mit ausreichend Leistung zu versorgen und somit Großmodelle präzise steuern zu können.Plug & PlayStandardmäßig mit 6,5mm Goldkontakt Buchsen ausgestattet können die Stecker der meisten Brushless Motoren gleich in den Regler gesteckt werden. Auch Akkuseitig ist bereits der weitverbreitete Traxxas Stecker verlötet, somit entfällt in den meisten Fällen das lästige löten und der Regler kann gleich in Betrieb genommen werden.Großes EinsatzgebietDieser Regler kann in jedem 1/5 Modell ideal eingesetzt werden egal ob Buggy, Monster Truck, Short Course oder Truggy. So beispielsweise im HPI Baja, Losi 5T, Losi DBXL oder MCD Race Runner welche mit einem Konversion Kit auf Brushless umgebaut wurden. Er ist die ideale Wahl für High-End Modelle die stark gefordert oder aggressive betrieben werden.Nahezu wartungsfreiDer ganze Regler mit Ausnahme des Lüfters ist grundsätzlich Wartungsfrei. Es muss lediglich die Lüfterhaube abgenommen werden um den Lüfter bei Bedarf zu ersetzen. Es ist somit kein Öffnen des Gehäuses oder ähnlichem notwendig und der ganze Vorgang ist schnell und reibungslos zu bewerkstelligen. Zudem ist der Lüfter stoßfest designed worden um auch regelmäßige hohe Sprünge und harte Landungen ohne Schäden zu überstehen.Technische Daten Regler:Strom (Dauer/Spitze): 200A/1300AZellenzahl: LiPo: 3-8SNiMH: 9-24SBEC Spannung: 6-7,4V (einstellbar)Abmessung: 93,35x58,12x47,81mmGewicht: 342gAnwendung: 1/5 Touring Car, Buggy, Truggy, TruckTechnische Daten Motor:Typ: SensorlessPole: 4RPM/Volt 800kVAußendurchmesser: 56mmLänge: 113mmWellendurchmesser: 8mmAnwendung: 1/5 mit 3-8S LiPoLieferumfang:1x Regler1x Motor1x Manual (Englisch)