The DF-1060 brushed controller from DF Models with 60 amps continuous power. The ideal controller for all common 1:14-1:10 brushed models. The powerful BEC delivers 6 volts and 5 amps. The controller is of course waterproof, so trips through puddles, etc. are no problem. The aluminum heat sink provides sufficient heat dissipation. The DF-1060 can be operated with LiPo or NiMH batteries. For mounting the controller, screw tabs are attached to the sides. Thus, the controller can be screwed to a bracket, etc., who prefers to fix it with double-sided tape can simply unclip the screw lugs (these are plugged).Technical data:Function: Forward, brake, reverseOperating voltage: 7.2 - 11 voltsCells: NiMH 6-7 | LiPo 2SPower: 60 AmpsBEC: 6 Volt | 5 AmpereSafety: Low voltage cutoff, waterproof,Cable, connector: 16AWG, T-PlugDimensions: 45x34x26mmWeight: 51g

The DF-120BL brushless controller from DF Models with 120 amps continuous power. The ideal controller for all common 1:10 or 1:8 models. The power BEC provides 6 volts and 10 amps of power. The controller is of course waterproof, so driving through puddles etc. is no problem. The integrated fan provides sufficient heat dissipation.Technical data:Function: Forward, brake (25/50/75/100 % adjustable), reverseOperating voltage: 8.4 - 16.8 voltsCells: LiPo 2-4SPower: 120 AmpsBEC: 6 Volt | 10 AmpereSafety: Low voltage cutoff (under voltage protection), water protected,Cable, connector: 12AWG, T-Plug, 4mm gold connectors for motorDimensions: 58x41x35mmWeight: 130gProgramming: via Bluetooth (APP) (Adpter No. df-1240 needed)

Technische Daten:Spannung: 7,4 VoltZellenzahl: 2SKapazität: 1500 mAhEnergie: 11,1 WhTyp: LiIonAbmessungen: 67x35x18 mmGewicht: ca. 75 g (incl. Kabel und Stecker)

* 7,2 V* 3000 mAh* 6 Zellen* mit T-Connector

Dimensions: 130x46x25 mmWeight: approx. 320 g (incl. cable and plug)

Length: 138mmwidth: 46mmHeight: 24,8mmWeight: 230g

- Current: 7,4 Volt (2S)- capacity: 5200 mAh- C-Rate: 45C- Typ: LiPo- Size: 138x46x31 mm- Weight: 280 g

- Current: 7,4 Volt (2S)- capacity: 6500 mAh- C-Rate: 45C- Typ: LiPo- Size: 138x46x31 mm- Weight: 300 g

- Current: 11,1 Volt (3S)- capacity: 4500 mAh- C-Rate: 45C- Typ: LiPo- Size: 138x46x25 mm- Weight: 345 g

Mit dem Multi-Switch können Sie über die DF-Fernsteuerung Race X6 zwei Kanäle ansteuern, z.B. das Licht an und aus schalten oder die Seilwinde steuern.

Mit dem Multi-Switch können Sie über die DF-Fernsteuerung Race X6 zwei Kanäle ansteuern, z.B. das Licht an und aus schalten oder die Seilwinde steuern.

The RACE X3 remote control from DF Models comes with some top features!3-channel, dual rate for gas, 2.4 GHz system, ergonomic design. The RACE X3 is a 3 channel remote control that can be used universally for all common RC cars, ships, etc.. A highlight in addition to the standard functions such as servo reversal, dual rate for steering as well as trim options is the switchable dual rate for the throttle channel. The system can thus be set to 100 / 75 / 50 % maximum speed.The receiver is available separately with order no.: df-2241.Dimensions receiver (No. df-2241):34x21x12mm (LxWxH)Weight approx. 5gScope of delivery:2,4 GHz remote control (3-channel)Receiver (3-channel)Manual (D, ENG, ES, IT, FR)

Discover the new DF-1500D Digital Servo from DF Models, redefining performance and reliability. Equipped with an XXL steel gear, this servo surpasses all previous standard servo gears with remarkable strength and precision. The gears are up to 1/3 to 1/2 larger and sturdier than typical servos in this class. Built with durable metal bushings to reduce wear, it ensures consistent accuracy over time. This digital servo is also ball-bearing and waterproof, making it ideal for dedicated RC enthusiasts. Key Features of the DF-1500D Digital Servo: Torque: 16 KG (6V) / 15 KG (4.8V) Speed: 0.13s (6V) / 0.15s (4.8V) Dimensions: 40x20x41mm, Weight: 64g Robust XXL steel gear, ball bearings, and waterproof design The DF-1500D Digital Servo delivers top performance at a competitive price – the perfect choice for your RC models!

The proven DF-4J Crawler now with ALU-CHASSIS-SUSPENSION for even more stability!XXL monster crawler tires, extreme ground clearance and enormous suspension travel, this is what distinguishes the DF-4J Crawler.The 2023 edition is equipped with a special LiPo compatible crawler controller and a special crawler motor. The rigid axles with metal differential locks defy any terrain and allow the most impossible off-road maneuvers. The robust aluminum body mounts, now additionally reinforced with aluminum profiles, give the model additional rigidity. Oil-pressure shock absorbers with aluminum parts give the model the right suspension. The 2-speed transmission, which can be shifted by remote control, allows for brisk driving or very slow crawling. The maximum top speed is also continuously adjustable from 0 - 100% via dual rate on the remote control. A metal gear steering servo steers your model in the precise where you want. Also switchable via the 5-channel remote control is the already built-in NEW LED lighting with turn signals, brake lights, etc. The winch with steel cable installed in the special model can also be operated by remote control (forward / reverse). Many accessories (optionally available) such as all-wheel steering leave plenty of room to customize and tune the model. The model is Ready To Run and comes with a 5-channel 2.4 GHz remote control, NiMH battery and plug-in charger. A run time of over 60 minutes is possible with the DF-4J.Technical data:Scale: 1:10XXL RTRDrive: 4WD brushed - 2 speed gearboxLength: 560 mmWidth: 305 mmHeight: 287 mmWheelbase: 340 mmTires: 125x52 mmScope of delivery:RC Crawler RTR2.4 GHz 5-channel remote controlNiMH drive battery - 7.2 Volt - 1800 mAhCharger

The proven DF-4J Crawler now with ALU-CHASSIS-SUSPENSION for even more stability!XXL monster crawler tires, extreme ground clearance and enormous suspension travel, this is what distinguishes the DF-4J Crawler.The 2023 edition is equipped with a special LiPo compatible crawler controller and a special crawler motor. The rigid axles with metal differential locks defy any terrain and allow the most impossible off-road maneuvers. The robust aluminum body mounts, now additionally reinforced with aluminum profiles, give the model additional rigidity. Oil-pressure shock absorbers with aluminum parts give the model the right suspension. The 2-speed transmission, which can be shifted by remote control, allows for brisk driving or very slow crawling. The maximum top speed is also continuously adjustable from 0 - 100% via dual rate on the remote control. A metal gear steering servo steers your model in the precise where you want. Also switchable via the 5-channel remote control is the already built-in NEW LED lighting with turn signals, brake lights, etc. The winch with steel cable installed in the special model can also be operated by remote control (forward / reverse). Many accessories (optionally available) such as all-wheel steering leave plenty of room to customize and tune the model. The model is Ready To Run and comes with a 5-channel 2.4 GHz remote control, NiMH battery and plug-in charger. A run time of over 60 minutes is possible with the DF-4J.Technical data:Scale: 1:10XXL RTRDrive: 4WD brushed - 2 speed gearboxLength: 560 mmWidth: 305 mmHeight: 287 mmWheelbase: 340 mmTires: 125x52 mmScope of delivery:RC Crawler RTR2.4 GHz 5-channel remote controlNiMH drive battery - 7.2 Volt - 1800 mAhCharger

Be Faster than the others...this is possible with the DF06 Evolution Race Truck in 1:14 scale!Evolution is not just any addition here, but here the name is program! The DF06 is equipped with all imaginable tuning parts "out of the box". Aluminum oil shocks, metal driveshafts, metal CVD front gimbals, aluminum control arm mounts and shock towers, right/left threaded rods, special servo saver, encapsulated gearbox, and an aluminum chassis leave no tuning wish unfulfilled! In addition, the wheel carriers and steering knuckles were made of Metll. This gives the truck even more stability under extreme loads. The DF06 is a 4WD truck with a 550 motor, which is powered by a 7.4 volt Li-battery. This makes top speeds of up to 60 km/h possible. The Ultra-Grip tires bring the power to the road and off-road.By means of the Dual-Rate, the maximum speed can be continuously reduced via remote control (maximum speed 0 - 100% adjustable!).Thus, the model is also suitable for beginners to enter the RC sport!Scope of delivery:RC Truck RTR2.4 GHz remote controlLiPo drive battery - 7.4 Volt - 1500 mAhUSB charging cableManualTechnical data:Scale: 1:14Drive: 4WD brushedLength: 310 mmwidth: 235 mmHeight: 140 mmWheelbase: 186 mmSpeed: up to 60 km/hTires: 85x45 mmWeight: approx. 1000 g

Evolution is not just any addition here, but here the name is program! The Z06 Evo V2 is equipped with all imaginable tuning parts "out of the box". Aluminum oil shocks, metal driveshafts, metal CVD front gimbals, aluminum control arm mounts and shock towers, metal right/left threaded rods, special servo saver, encapsulated transmission, and an aluminum chassis leave no tuning wish unfulfilled! The Z06 Evo V2 is a 4WD buggy with 550cc motor powered by a 7.4 volt Li-battery. Thus, top speeds of up to 60 km/h are possible. The Ultra-Grip tires on disc rims bring the power to the road.By means of the dual rate, the maximum speed can be continuously reduced by remote control (maximum speed 0 - 100% adjustable!).Thus, the model is also suitable for beginners to enter the RC sport!Scope of delivery:RC buggy RTR2.4 GHz remote controlLiPo drive battery - 7.4 Volt - 1500 mAhUSB charging cableManualTechnical data:Scale: 1:14Drive: 4WD brushedLength: 310 mmWidth: 205 mmHeight: 120 mmWheelbase: 186 mmSpeed: up to 60 km/hTires: 73x27/31 mmWeight: approx. 1000 g

BL06 ... the "big brother" of the Z-06 buggy with BRUSHLESS power. Like its little brother (Z-06), the BL06 brushless buggy is equipped with every conceivable tuning part "out of the box". Aluminium oil-pressure shock absorbers, metal drive shafts, metal CVD cardans at the front, aluminium wishbone mounts and shock towers, metal right/left threaded rods, special servo saver, encapsulated gearbox and a metal chassis leave no tuning wishes unfulfilled! The BL06 is a 4WD buggy with a 4300KV brushless motor powered by a 7.4 volt LiPo battery. Top speeds of up to 80 km/h are possible. The new Grip tyres on disc rims bring the power to the road and off-road.By means of the Dual-Rate, the maximum speed can be continuously reduced via remote control (maximum speed 0 - 100 % adjustable!).Thus, the model is also suitable for beginners to enter the RC sport!Technical data:Scale: 1:14Drive: 4WD brushlessMotor: Brushless 2845 - 4300kvlength: 310 mmWidth: 205 mmHeight: 120 mmWheelbase: 186 mmSpeed: up to 80 km/hTyres: 73x27/31 mmWeight: approx. 1000 gScope of delivery:RC buggy RTR2.4 GHz remote controlLiPo drive battery - 7.4 Volt - 1500 mAhUSB charging cableManual (D, ENG, ES, IT, FR)

The DF06 PRO MINI from the DF Models Advanced Line is a 1:18 scale brushless truck. The model comes ready to drive (RTR) with remote control, battery (LiPo Power) and charger (USB charging cable). The DF06 PRO MINI is a 4WD truck equipped with a 5000kv brushless power motor and a powerful controller unit. The 7.4 volt LiPo battery provides the necessary power for the powerful drive. Top speeds of up to 60 km/h are therefore possible. Like its brother, the DF06 (no. 3122), the truck is equipped with every conceivable tuning part "out of the box”. Dampers with aluminum parts, metal drive shafts, metal CVD cardans at the front, aluminum wishbone brackets, special servo saver, encapsulated gearbox and ball bearings leave hardly any tuning wishes unfulfilled! LED lighting is integrated into the bodywork, which is attached with a quick-release fastener, making driving at night/dusk a highlight.The maximum speed can be reduced by remote control using the dual rate. This makes the model ideal for beginners to get into RC sport!The remote control offers another highlight ... it has an integrated cell phone holder. You can attach your smartphone to the remote control and thus have the option of filming action videos yourself, for example. No 3rd hand or 2nd person required for filming, you can concentrate fully on controlling your model. Scope of delivery:RC truck RTR2.4 GHz remote controlLiPo drive battery - 7.4 Volt - 1200 mAhUSB charging cableInstruction manualTechnical data:Scale: 1:18Drive: 4WD brushlessLength: 280 mmWidth: 210 mmHeight: 110 mmWheelbase: 155 mmSpeed: up to 60 km/h

DF06 Light Truck 1:14 RTR – Your Entry into RC Model BuildingDiscover the DF06 Light Race Truck in 1:14 scale from DF Models. This 4WD model with a powerful motor and 7.4-volt battery reaches speeds of up to 40 km/h. Thanks to the dual-rate function, the maximum speed can be continuously adjusted via the remote control from 0 to 100%, ideal for beginners and advanced users. The ultra-grip tires provide excellent traction on various surfaces, both on-road and off-road. The carbon-look chassis not only offers an appealing appearance but is also extremely stable and robust. Additionally, the DF06 Light Truck features LED lighting for driving fun in the dark.Technical Data:Scale: 1:14Drive: 4WD brushedLength: 310 mmWidth: 235 mmHeight: 140 mmWheelbase: 186 mmSpeed: up to 40 km/hTire Size: 85x45 mmWeight: approx. 1000 gScope of Delivery:RC Truck RTR2.4 GHz Remote ControlLi-Ion Drive Battery – 7.4 Volt – 1500 mAhUSB Charging CableManualRequired Accessories:4x AA BatteriesUSB Power Adapter (minimum 10 watts)The DF06 Light Truck offers excellent value for money and is the perfect entry into the world of RC model building.