Stampede 4x4

Backplate screws (3x8mm hex cap) (6)/washers (6)/ wrench

Wheel hubs, hex (2)/ stub axle pins (2)

Wheel hubs, hex (blue-anodized, light-weight aluminum) (2)/ axle pins(2)

Alternative zu Traxxas #1654

Shock shafts, steel, chrome finish (long) (2)

Shock shafts, hardened steel, Titanium Nitride coated (long) (2)

Nuts, 4mm nylon locking (6)

Nuts aluminum flanged serrated (4mm) (red-anodized) (4)

Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)

Alternative zu Traxxas #1747

Pink-anodized aluminum 4mm flanged serrated lock nuts (4)

Silicone diaphragms (4)

Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)

Rear Stub Axle Carriers (2)

Red Rear Aluminum Stub Axle Carriers (2)

Alternative zu Traxxas #1952

Green Rear Aluminum Stub Axle Carriers (2)

Orange Rear Aluminum Stub Axle Carriers (2)

Teflon washers, 5x8x0.5mm (20) (use with ball bearings)

Servo, digital high-torque (ball bearing), waterproof

Servo 2250 Digital High-torque 330 Coreless

- Factory fit for drop-in installation into Traxxas Models- Fully waterproof, not "water resistant"- Compatible with Traxxas Stability Management™ (TSM)- 23,7 kg/cm torque at 6.0V- 0.19 sec/60° at 6.0V- Metal gears- Dual ball bearings- Coreless motor technology- Aluminum center caseFor TRX-4 InstallationThe Traxxas High-Torque 330 Blue servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit #TRX2262 and a steel servo horn #TRX8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.alternative Traxxas #2075

Y-harness BEC to LED light set

digital HighTorque Servo BB MG WP

Torque: 6,7kg @ 6.0VSpeed: 0.175 sec/60° @ 6.0VWaterproofing: Sealed case with O-ringGears: MetalCase: Plastic with full ball bearingsDimensions: 55x44,5x20mm

Shock rebuild kit (for 2 shocks)

Screws, 4x10mm countersunk machine (hex drive) (6)

Screws, 4x12mm countersunk machine (hex drive) (6)

Screws, 3x10mm countersunk machine (6) (hex drive)