Filter
Filter
–
ESC / Motor
RC ESC / Motor
1:10 Brushed V2 Standard & Crawler ESC 80A waterproof
We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the ESC. In addition, a programming card is available, which can be used for even more settings. HIGHLIGHTS:One ESC for all vehicle types (Crawler, Off-road, On-road, Boot)Programmable via jumper and separately available programming card (Item: 2110061)2-3S LiPo capableContinuous load: 80ABEC: 5A / 6.0VProgrammable Features (via programming card): Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Leicht zu programmieren durch Jumper und Programmierkarte im Taschenformat (separat erhätlich - Art. 2110061)Specification:Continuous/short time load: 80A/320AResistance: 0.0014ohmMotor type: Brushed standard motors Battery: 2-3S LiPo / 5-9 cells NiMHBEC 6.0V/5AMotor Limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25,000rpm.Motor Limit 3S LiPo/7-9 cells NiMH: ≥ 18T or <17,000U/min.Cable lengths: BEC: 180mm / Motor: 200mm / Power: 200mmDimensions: 41.5*35*29.5mmWeight: 63.4gScope of delivery:1:10 Brushed Speed Controller V2Adhesive TapeManual
Product number: ABS-2100004V2
Manufacturer: Absima
€24.95*
1:10 Crawler/Boot brushed Combo 14T
This set is specially designed for new beginners and intermediate modelers. It not only carries forward the outstanding quality of ABSIMA (powered by HOBBYWING) products but simplifies the operation. FEATURES:- Water-proof and dust-proof for all weather races- Small size with built-in capacitor module- Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection- Easily programmed with "jumpers"SPECIFICATION:- Application: On-road/Off-road- Cont. / Burst Current - forward: 40A / 180A- Cont. / Burst Current - reverse: 20A / 90A- Input: 2-3S LiPo / 5-9 Cells NiMH- Battery "Low-Power" Cut-off: NiMH 4.5V / 2S LiPo 6.5V / 3S LiPo 9.75V- Motor Limit 2S LiPo/5-6 Cells NiMH: 540 or 550 Motor =12T or RPM <30.000 @ 7.2V- Motor Limit 3S LiPo/7-9 Cells NiMH: 540 or 550 Motor =18T or RPM <20.000 @ 7.2V- Maximum Reverse Force: 50% - Overheat Protection: 100°- Resistance: Fwd: 0.002 Ohm, Bwd: 0.004 Ohm- Built-in BEC: 2A/6V (Linear Mode BEC)- Plug System: Tamiya- Plug & Drive System: yes- On/Off Switch: yes- Dimmension (L/W/H): 46.5x34.0x28x5 mm- Weight: 70gSPECIFICATION MOTOR:- Turns: 14x2T- RPM: 26.300- Continuous Current: 160W- Operation V: 7.2V-7.4V- Motor size: 540- Shaft length: 12,3mm- Shaft diameter: 3,19mm- Motor length: 53,2mm- Motor diameter: 35,7mm- Brushess & Springs changeable: yes- Application: TruckSCOPE OF DELIVERY:- WP1040 Brushed ESC- 14T Electric Truck Motor- Manual
Product number: ABS-2100013
Manufacturer: Absima
€39.95*
14T Racing Motor & 80A ESC Thrust B-Spec V2 Combo
We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)Programmable via jumper and separately available programming card (Item 2110061)2S LiPo operation recommendedMotor ready soldered - plug-n-playProgrammable features (via programming card):Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features ESC:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)Specification ESC:Continuous/short-term load: 80A/320AResistance: 0.0014ohmSuitable motor types: Brushed standard motors Battery recommendation: 2S LiPo / 6 cells NiMHBEC 6.0V/5AMotor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM Measure: 41.5*35*29.5mmPlug system: T-plugWeight: 63.4gSpecification B-Spec Motor:Turns: 14TSpeed: 26.300RPMOutput power: 160WOperating voltage: 7.2-7.4VTechnical Size: 540Motor shaft: Length 12,3mm; Durchmesser: 3,18mm Motor size: Length 53,2mm; Durchmesser: 35,7mm Ball bearings: 2Weight: 165gLieferumfang:1:10 Brushed V2 Speed ControllerThrust B-Spec Brushed MotorAdhesive TapeManual
Product number: ABS-2100013V2
Manufacturer: Absima
€44.95*
1:10 Crawler/Boot brushed Combo 17T
This set is specially designed for new beginners and intermediate modelers. It not only carries forward the outstanding quality of ABSIMA (powered by HOBBYWING) products but simplifies the operation. FEATURES:- Water-proof and dust-proof for all weather races- Small size with built-in capacitor module- Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection- Easily programmed with "jumpers"SPECIFICATION:- Application: On-road/Off-road- Cont. / Burst Current - forward: 40A / 180A- Cont. / Burst Current - reverse: 20A / 90A- Input: 2-3S LiPo / 5-9 Cells NiMH- Battery "Low-Power" Cut-off: NiMH 4.5V / 2S LiPo 6.5V / 3S LiPo 9.75V- Motor Limit 2S LiPo/5-6 Cells NiMH: 540 or 550 Motor =12T or RPM <30.000 @ 7.2V- Motor Limit 3S LiPo/7-9 Cells NiMH: 540 or 550 Motor =18T or RPM <20.000 @ 7.2V- Maximum Reverse Force: 50% - Overheat Protection: 100°- Resistance: Fwd: 0.002 Ohm, Bwd: 0.004 Ohm- Built-in BEC: 2A/6V (Linear Mode BEC)- Plug System: Tamiya- Plug & Drive System: yes- On/Off Switch: yes- Dimmension (L/W/H): 46.5x34.0x28x5 mm- Weight: 70gSPECIFICATION MOTOR:- Turns: 17x2T- RPM: 28.800- Continuous Current: 155W- Operation V: 7.2V-7.4V- Motor size: 540- Shaft length: 12,3mm- Shaft diameter: 3,19mm- Motor length: 53,2mm- Motor diameter: 35,7mm- Brushess & Springs changeable: yes- Application: TruckSCOPE OF DELIVERY:- WP1040 Brushed ESC- 17T Electric Truck Motor- Manual
Product number: ABS-2100014
Manufacturer: Absima
€44.95*
17T Racing Motor & 80A ESC Thrust B-Spec V2 Combo
We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)Programmable via jumper and separately available programming card (Item 2110061)2S LiPo operation recommendedMotor ready soldered - plug-n-playProgrammable features (via programming card):Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features ESC:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)Specification ESC:Continuous/short-term load: 80A/320AResistance: 0.0014ohmSuitable motor types: Brushed standard motors Battery recommendation: 2S LiPo / 6 cells NiMHBEC 6.0V/5AMotor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM Measure: 41.5*35*29.5mmPlug system: T-plugWeight: 63.4gSpecification B-Spec Motor:Turns: 17TSpeed: 28.800RPMOutput power: 155WOperating voltage: 7.2-7.4VTechnical Size: 540Motor shaft: Length 12,3mm; Durchmesser: 3,18mm Motor size: Length 53,2mm; Durchmesser: 35,7mm Ball bearings: 2Weight: 165gLieferumfang:1:10 Brushed V2 Speed ControllerThrust B-Spec Brushed MotorAdhesive TapeManual
Product number: ABS-2100014V2
Manufacturer: Absima
€44.95*
1:10 Brushed Thrust B-Spec V2 19T/80A Combo
We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)Programmable via jumper and separately available programming card (Item 2110061)2S LiPo operation recommendedMotor ready soldered - plug-n-playProgrammable features (via programming card):Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features ESC:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)Specification ESC:Continuous/short-term load: 80A/320AResistance: 0.0014ohmSuitable motor types: Brushed standard motors Battery recommendation: 2S LiPo / 6 cells NiMHBEC 6.0V/5AMotor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM Measure: 41.5*35*29.5mmPlug system: T-plugWeight: 63.4gSpecification B-Spec Motor:Turns: 19TSpeed: 22.500RPMOutput power: 140WOperating voltage: 7.2-7.4VTechnical Size: 540Motor shaft: Length 12,3mm; Durchmesser: 3,18mm Motor size: Length 53,2mm; Durchmesser: 35,7mm Ball bearings: 2Weight: 165gIncludes:1:10 Brushed V2 Speed ControllerThrust B-Spec Brushed MotorAdhesive TapeManual
Product number: ABS-2100015V2
Manufacturer: Absima
€44.95*
1:10 Crawler/Boot brushed Combo 55T
This set is specially designed for new beginners and intermediate modelers. It not only carries forward the outstanding quality of ABSIMA (powered by HOBBYWING) products but simplifies the operation. FEATURES:- Water-proof and dust-proof for all weather races- Small size with built-in capacitor module- Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection- Easily programmed with "jumpers"SPECIFICATION:- Application: On-road/Off-road- Cont. / Burst Current - forward: 40A / 180A- Cont. / Burst Current - reverse: 20A / 90A- Input: 2-3S LiPo / 5-9 Cells NiMH- Battery "Low-Power" Cut-off: NiMH 4.5V / 2S LiPo 6.5V / 3S LiPo 9.75V- Motor Limit 2S LiPo/5-6 Cells NiMH: 540 or 550 Motor =12T or RPM <30.000 @ 7.2V- Motor Limit 3S LiPo/7-9 Cells NiMH: 540 or 550 Motor =18T or RPM <20.000 @ 7.2V- Maximum Reverse Force: 50% - Overheat Protection: 100°- Resistance: Fwd: 0.002 Ohm, Bwd: 0.004 Ohm- Built-in BEC: 2A/6V (Linear Mode BEC)- Plug System: Tamiya- Plug & Drive System: yes- On/Off Switch: yes- Dimmension (L/W/H): 46.5x34.0x28x5 mm- Weight: 70gSPECIFICATION MOTOR:- Turns: 55x2T- RPM: 7.700- Continuous Current: 85W- Operation V: 7.2V-7.4V- Motor size: 540- Shaft length: 12,3mm- Shaft diameter: 3,19mm- Motor length: 53,2mm- Motor diameter: 35,7mm- Brushess & Springs changeable: yes- Application: TruckSCOPE OF DELIVERY:- WP1040 Brushed ESC- 55T Electric Truck Motor- Manual
Product number: ABS-2100018
Manufacturer: Absima
€44.95*
1:10 Brushed Thrust B-Spec V2 55T/80A Combo
We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)Programmable via jumper and separately available programming card (Item 2110061)2S LiPo operation recommendedMotor ready soldered - plug-n-playProgrammable features (via programming card):Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features ESC:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)Specification ESC:Continuous/short-term load: 80A/320AResistance: 0.0014ohmSuitable motor types: Brushed standard motors Battery recommendation: 2S LiPo / 6 cells NiMHBEC 6.0V/5AMotor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM Measure: 41.5*35*29.5mmPlug system: T-plugWeight: 63.4gSpecification B-Spec Motor:Turns: 55TSpeed: 7.700RPMOutput power: 85WOperating voltage: 7.2-7.4VTechnical Size: 540Motor shaft: Length 12,3mm; Durchmesser: 3,18mm Motor size: Length 53,2mm; Durchmesser: 35,7mm Ball bearings: 2Weight: 165gIncludes:1:10 Brushed V2 Speed ControllerThrust B-Spec Brushed MotorAdhesive TapeManual
Product number: ABS-2100018V2
Manufacturer: Absima
€44.95*
USB Interface Adaptor and Cable Revenge CTS
Fits all ESC Revenge CTS Serie
Product number: ABS-2110037
Manufacturer: Absima
€24.95*
High Speed Fan for Revenge CTS10 Speed Controler
18000 RPM
Product number: ABS-2110038
Manufacturer: Absima
€14.95*
Programming Box for THRUST BL ECO 1:10 / 1:8
Einstellbare Parameter 1:10 "Thrust BL ECO" Regler ( Artikel Nr. 2110007 oder aus BL Combo Artikel Nr. 2120002 ) :Runing Mode ( Funktionsweise Regler ) ; 1. = Vorwärts mit Bremse / 2. = Vorwärts - Bremse - Rückwärts / 3. = Vorwärts - RückwärtsDrag Brake ( Automatik Bremse über Motor ) ; 1. = 0% / 2. = 5% / 3. = 10% / 4. = 20% / 5. = 40% / 6. = 60% / 7. = 80% / 8. = 100%Voltage CutOff ( LiPo Schutz Abschaltung - angegebene Werte beziehen sich auf Volt pro Zelle ) ; 1. = Keine Abschaltung ( nicht empf. !!! ) / 2. = 2.6V / 3. = 2.8V / 4. = 3.0V / 5. = 3.2V / 6. = 3.4VPunch Profile ( Startpunch ) ; 1. = Level 1 / 2. = Level 2 / 3. = Level 3 / 4. = Level 4 / 5. = Level 5 / 6. = Level 6 / 7. = Level 7 / 8. = Level 8 / 9. = Level 9Max Brake Force ( Wirkungsgrad Bremse ) ; 1. = 25% / 2. = 50% / 3. = 75% / 4. = 100% / 5. = Deaktiviert ○ Einstellbare Parameter 1:8 "Thrust BL ECO" Regler ( Artikel Nr. 2110008 der aus BL Combo Artikel Nr. 2120003 ) :Runing Mode ( Funktionsweise Regler ) ; 1. = Vorwärts mit Bremse / 2. = Vorwärts - Bremse - RückwärtsDrag Brake ( Automatik Bremse über Motor ) ; 1. = 0% / 2. = 5% / 3. = 10% / 4. = 15% / 5. = 20% / 6. = 25% / 7. = 30% / 8. = 40%Voltage CutOff ( LiPo Schutz Abschaltung - angegebene Werte beziehen sich auf Volt pro Zelle ) ; 1. = Keine Abschaltung ( nicht empf. !!! ) / 2. = 2.6V / 3. = 2.8V / 4. = 3.0V / 5. = 3.2V / 6. = 3.4VPunch Profile ( Startpunch ) ; 1. = Level 1 / 2. = Level 2 / 3. = Level 3 / 4. = Level 4Max Brake Force ( Wirkungsgrad Bremse ) ; 1. = 25% / 2. = 50% / 3. = 75% / 4. = 100% ○ Technische Daten :Maße (LxBxH): 88 x 58 x 15 mmGewicht ca. 40 gBetriebsspannung 6.0 V ○ Lieferumfang :1 St. Programmbox1 St. AnschlußkabelBedienungsanleitung
Product number: ABS-2110041
Manufacturer: Absima
€19.95*
Programming Box for Revenge CTS V3.1 1:8 / 1:10
Product number: ABS-2110053
Manufacturer: Absima
€39.95*
Programming Box for Crawler 880/Quicrun ESCs
Programming box for programmable Hobbywing brushed crawler speed controllers e.g. Quicrun (Sherpa PRO) or WP880 (Yucatan) Programmable Features: Runing Mode: Forward/Brake / Forward/Brake/Reverse / Forward/ReverseBattery Type: LiPo / NiMHCutoff Voltage: Disable / Low / Medium / HighInitial Start Force: 0% / 2% / 4% / 6% / 8% / 10% / 12% / 14% / 16%Max Forward Force: 25% / 50% / 75% / 100%Max Reverse Force: 25% / 50% / 75% / 100%Max Brake Force: 0% / 12,5% / 25% / 37,5% / 50% / 62,5% / 75% / 87,5% / 100%Initial Brake Force: 0% / 6,25% / 12,5% / 18,75% / 25% / 31,5% / 37,5% / 43,75% / 50%Drag Brake: 0% / 5% / 10% / 50% / 60% / 70% / 80% / 90% / 100%Drake Brake Rate: Level 1 - 9Neutral Range: 0,02ms - 0,12msStart Mode Punch: Level 1 - 9PWM Frequency: 1k / 2K / 4K / 8K / 16KBEC Voltage: 6V / 7.4VFreewheeling: Enable / Disable
Product number: ABS-2110060
Manufacturer: Absima
€19.95*
Programming Card for V2 Brushed ESC
Programming card for Brushed V2 ESC (2100004V2) Programmable features:Initial Start Force: 5%* / 13% / 21% / 29%.Low V cut-off (low voltage protection): 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft
Product number: ABS-2110061
Manufacturer: Absima
€14.95*
Programming Box for ECOV2 Brushless ESC
Diese Programmbox ist passend für den ECOV2 Fahrtenregler.
Product number: ABS-2110062
Manufacturer: Absima
€24.95*
1:10 Brushless Set Thrust BL ECOV2 - 60A/3421KV
Our Thrust ECOV2 combo consisting of a sensorless brushless speed controller (ESC) and a 3421KV motor is designed for all owners of a 1:10 off-road or on-road vehicle. This system is ideal for converting from brushed to brushless or a complete rebuild. Thanks to the easy instalation and pre-confirigation from the factory, the set can be used immediately after installation.For ideal adaptation to the vehicle chassis, we recommend the use of a programming box, which is available separately (part number 2110062).With this box it is playfully easy to make the settings of the 10 different parameters. Highlights: • 2S & 3S LiPo suitable• Programmable via separately available programming box (2110062)• Ready-to-run out of the box Features Brushless ESC: • Water-proof 60A ESC incl. cooling fan• 2S & 3S LiPo suitable• T-Plug battery plug• Motor connection via 3.5mm gold contact plugs and sockets• Immediately ready to drive (no configuration necessary)• Easy calibration• Sensorless system• NiMH 4 - 9 cells & LiPo* 2 - 3 cells operation (*recommended)• Overheat protection 120°• Short-term load: 360A• BEC 7,4V/8,4V 6A (switch mode)• Multiple protection functions• Operating voltage 4.8 - 11.1V • Motor timing 18.75 deg. • LiPo voltage cutoff: 3.1V/cell (factory setting, programmable) Technichal Features ESC: • Dimensions (L/W/H): 50 x 35 x 37 mm • Weight incl. cable: 96 g• Motor limit @2S LiPo / 6 cells NiMH = On-road < 8T / Off-road < 11T and motor limit @3S LiPo / 9 cells NiMH = Onroad < 11T / Offroad < 14T Features Brushless Motor: • Splash-proof• Aluminum housing • Sensorless operation • Overheat protection: 105° Technichal Features Motor: • 3421 KV • 27.400 RPM @ 7.4 Volt • 4 Pole • Operating voltage: 4.8 - 11.1V • Motor size: 540• Motor housing length: 52.0 mm• Motor housing Durchmesser: : 36.0 mm• Shaft length: 14.5 mm• Shaft Durchmesser: : 3,17 mm • Weight: 200 g Scope of delivery: • 1 pcs. Thrust Eco ESC (Item no. 2110007V2) • 1 pcs. Thrust Eco Motor (Item no. 2130005) • Manual (german/english/french) Recommended accessories: • Item 2110062 - Programm box for Thrust ECOV2 ESC
Product number: ABS-2120002V2
Manufacturer: Absima
€84.95*
Brushless motor KV 2260 AMT8
2260 KV33.450 rpm @ 14.8 Volt4 polesOperating voltage 7.2 - 22.2VHousing length : 74 mmHousing Ø : 36.2 mmShaft length : 15.68 mmShaft diameter: 5 mm
Product number: ABS-2130003
Manufacturer: Absima
€64.95*
Brushless Motor 1:10 Short Course Revenge CTM 4300kv
1:10 Brushless Motor from the Absima "REVENGE CTM" competition series.This high performance motors can be operated and controlled by sensor and sensorless. Turns : 4300KVTurns / volt: 4300kVPower: 530W Power: 70AEfficiency: 93%Voltage: 1-3S Poles: 4 -Pole Sensor: Yes Adjustable timing: Yes Ø without solder lugs: 36mm ØDrive shaft : 5 mm / Module 1 Drive shaft length: 18.8 mm Length of motor body: 53.0 mm Weight: 177.5 gr Sensor cable is included.
Product number: ABS-2130030
Manufacturer: Absima
€109.95*
Brushless Motor 1:8 Revenge CTM 2300KV
Hochleistungs-Brushlessmotor aus der 1:8 Absima Revenge Competition SerieDer Motor kann sowohl sensorlos als auch sensorgesteuert betrieben werdenUmdrehungen / Volt: 2300 KVPower 2100 WLeistung 145 AEffizienz 88 %Volt 14.8 - 22.2 V4 PoleSensorgesteuertEinstellbares TimingDurchmesser: ohne Lötfahnen 42 mmDurchmesser: Antriebsschaft 5,0 mm / Modul 1Länge Antriebsschaft 18,3 mmLänge Motorengehäuse 69,0 mmGewicht 320 gLieferumfang: CTM 1:8 2300 KV Motor , SensorkabelEmpfohlen für 1:8 Buggys , Truggys , Onroad
Product number: ABS-2130042
Manufacturer: Absima
€119.95*
Fan 30mm 8000 RPM
Fan attachment for heat sinkSuitable for 1:10 engines8,000 rpmBEC connectionOperating voltage 6.0 V - 8.4 VOuter dimensions ( LxWxH ) approx. 30 x 30 x 10 mmDistance between fixing points approx. 24 mmScope of delivery: 1 fan 30 mm
Product number: ABS-2310032
Manufacturer: Absima
€5.95*