A remote control car as a gift

Rock racers and dessert buggies are on everyone's lips at the moment! On the one hand, this is due to the fact that the vehicles can be moved not only on the road. Especially in rough terrain, these vehicles offer a driving image that is unparalleled.The powerful ADB1.4 offers many advantages over its competitors. The extremely detailed body and the installed technology leave nothing to be desired!The 40A HOBBYWING brushed speed controller is waterproof and comes pre-assembled with a Tamiya plug. The controller can be used with 7.2V NiMH or 2S LiPo batteries (up to 30C). Powered by this is a 21T brushed motor which directly accesses an adjustable slipper clutch. The permanent all-wheel drive provides increased traction. The two differentials (front and rear) are driven by an aluminum driveshaft.4WD all-wheel drive2.4GHz remote controlExtremely durable composite plastic partsFully adjustable suspensionBall bearing driveAdjustable 16mm Big Bore shocksSteel differential outputs5mm aluminum motor mount5mm aluminum shock towersAluminum driveshaft2 cone differentials (front/rear)LED light bar front and rearExtremely detailed body with add-on partsVehicle can be powered by 2-cell LiPo batteries (up to 30C) Scale: 1:10Dimensions (L/W/H): 500x270x165 mmWeight: 2060gWheelbase: 290mmGround clearance: approx. 45mmTrack width: 215mm front / 210mm rearTires front/rear Durchmesser: : 110mm / Width: 45mmDamper oil: 400CPSDamper installation length: 80mmMotor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp) Dessert Buggy "ADB1.4" Brushed Version2.4GHz Remote Control CR2SV2Mini tool kitInstruction manual

Rock racers and dessert buggies are on everyone's lips at the moment! On the one hand, this is due to the fact that the vehicles can be moved not only on the road. Especially in rough terrain, these vehicles offer a driving image that is unparalleled.The powerful ADB1.4 offers many advantages over its competitors. The extremely detailed body and the installed technology leave nothing to be desired!The 40A HOBBYWING brushed speed controller is waterproof and comes pre-assembled with a Tamiya plug. The controller can be used with 7.2V NiMH or 2S LiPo batteries (up to 30C). Powered by this is a 21T brushed motor which directly accesses an adjustable slipper clutch. The permanent all-wheel drive provides increased traction. The two differentials (front and rear) are driven by an aluminum driveshaft.4WD all-wheel drive2.4GHz remote controlExtremely durable composite plastic partsFully adjustable suspensionBall bearing driveAdjustable 16mm Big Bore shocksSteel differential outputs5mm aluminum motor mount5mm aluminum shock towersAluminum driveshaft2 cone differentials (front/rear)LED light bar front and rearExtremely detailed body with add-on partsVehicle can be powered by 2-cell LiPo batteries (up to 30C) Scale: 1:10Dimensions (L/W/H): 500x270x165 mmWeight: 2060gWheelbase: 290mmGround clearance: approx. 45mmTrack width: 215mm front / 210mm rearTires front/rear Durchmesser: : 110mm / Width: 45mmDamper oil: 400CPSDamper installation length: 80mmMotor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp) Dessert Buggy "ADB1.4" Brushed Version2.4GHz Remote Control CR2SV2Mini tool kitInstruction manual

The new 80A brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully utilise the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item no. 2110061) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 540 15T brushed motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. Thanks to the higher output of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - regardless of the C-rate and capacity. 4 oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun is guaranteed. A servo with 15kg actuating force and metal gearing handles the steering commands.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that settings can be made easily using levers and rotary knobs. In addition, the remote control has a "beginner mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have much experience in handling such RC vehicles.Highlights:4WD all-wheel drive2.4 GHz 4-channel radio system80A brushed speed controller with T-plug540 15T motor with 32,000 rpm @ 7.4V15kg steering servo with metal gears (25T, ball bearings)4 oil shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish truggy body with plastic add-on parts"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:Scale 1:10Dimensions (L/W/H): 405x325x165 mmWeight: 1740gWheelbase: 270mmGround clearance: approx. 35mmTrack width: 270mm front/rearWheels front/rear: Durchmesser: 105mm / width: 55mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmEngine gear ratio: Pinion: 18T / main gear: 64T (module 0.6) Scope of delivery:1/10 Truggy "AT3.4V2" RTR2.4GHz "CR4S" remote controlSticker sheetinstruction manualadditionally required:4x AA batteries for remote control7.2V NiMH or 7.4V* LiPo drive battery (*recommended)Charger (suitable for the drive battery)Programming card for individual settings of the speed controller

Highlights:Scale 1:10Steel drive shaftsSpeed adjustment via remote control (High/Low)4WD2 electric drive motors6 shock absorbersOverheating protectionIPX4 splash water protectedproportional throttle and steering controlmassive front bumpereasy to steerReady-to-Run (RTR)forward - backward - right - leftrubber tyres with insertsfully sprung chassisextremely resilient, soft suspensionBall bearing drive46 mm high ground clearanceanodised aluminium axle pin holders v+hanodised aluminium front shock towersTop speed 45 km/h2.4 GHz remote controlIndoor/OutdoorScope of delivery:Sprint Truck 1:102.4 GHz remote controlUSB charging cableVehicle battery Lipo 7.4V 1600mAh3x AA batteries for the remote controlTechnical data:Dimensions: 345 x 305 x 165 mmScale: 1:10Battery: Lipo 7,4V 1600mAhWeight RTR: ~ 1705 gDriving time: ~ 10-15 min.Charging time: ~ 90-120 min.

Highlights:Scale 1:10Steel drive shaftsSpeed adjustment via remote control (High/Low)4WD2 electric drive motors6 shock absorbersOverheating protectionIPX4 splash water protectedproportional throttle and steering controlmassive front bumpereasy to steerReady-to-Run (RTR)forward - backward - right - leftrubber tyres with insertsfully sprung chassisextremely resilient, soft suspensionBall bearing drive46 mm high ground clearanceanodised aluminium axle pin holders v+hanodised aluminium front shock towersTop speed 45 km/h2.4 GHz remote controlIndoor/OutdoorScope of delivery:Sprint Truck 1:102.4 GHz remote controlUSB charging cableVehicle battery Lipo 7.4V 1600mAh3x AA batteries for the remote controlTechnical data:Dimensions: 345 x 305 x 165 mmScale: 1:10Battery: Lipo 7,4V 1600mAhWeight RTR: ~ 1705 gDriving time: ~ 10-15 min.Charging time: ~ 90-120 min.

Strong,Stronger, XL-Line!Consistently further thought; for everyone who couldn't decide between a lively buggy and an extremely off-road truck, we now have the solution.The new Twister Truggy. The mixture of buggy and truck is characterized by its lively and very stable road holding, as well as off-road capability.The wheelbase corresponds to the 1:10XL models, but the track has been slightly widened.1:10XL Line - These models are intended for everyone who is simply not stable enough. As XL suggests, this is not a pure 1/10th scale model, but rather a 1:8 scale model with high quality parts for maximum strength. The 2.5mm aluminium chassis in df model orange in combination with its matching upper deck is almost indestructible. Additional aluminium stub axles, aluminium dampers, adjustable camber/track and many other innovations are the result of years of further development of this model series.And the integrated, waterproof motor/controller combo, the encapsulated gearbox together with the powerful 9kg steering servo with metal gearbox make these models unbeatable!You want to heat at full throttle over unpaved terrain? You want to jump? With the XL-Line all this is no problem, the 550 Brushed motor accelerates the model to approx. 40 km/h.Specifications:Scale: 1:10XLDrive: 4WD - 550 brushedLength: 500 mmWidth: 340 mmHeight: 190 mmWheelbase: 303 mmTyres: 130x65 mmSpeed: up to 40 km/hdeliverables:RC-Truggy RTR2,4 GHz remote control550 brushed power motorspeed controllerservo with metal gearNiMH drive battery - 7,2 Volt - 3500 mAhplug-in mains chargermanual

Tamiya welcomes the Opel Calibra V6 Cliff R/C model based upon the TT-01 Type-E chassis. The Opel Calibra V6 Cliff took part in the 1995 running of the Deutsche Tourenwagen Meisterschaft (DTM) series. Entered by Joest Racing with the driver JJ. Lehto, the car was powered by a 2.5-liter V6 engine capable of 420 hp. The distinctive, overall black body with the Cliff logo caught people's eye, and this car showed off strength in the races.• This is a 1/10 scale R/C model assembly kit. Length: 448mm, width: 185mm, height: 128mm. Wheelbase: 257mm.• The bulky 1990s form of the Calibra V6 is captured in style by a lightweight, rigid polycarbonate body (clear) with separate side mirrors and a rear wing.• The model utilizes the shaft-driven 4WD TT-01 Type-E chassis, which is based around a durable bathtub frame and gives an intuitive, highly controllable drive.• Features 4 wheel double wishbone suspension system, and front and rear differential gears to produce an excellent drive.• Silver ABS, dish wheels are paired with racing slick tires.• Comes with stickers and masking stickers for use in the paint job.

Scope of delivery:Kit model with detailed illustrated assembly instructionsElectronic speed controller540 electric motorBody clearRequired accessories: Remote control with receiverSteering servo7.2V NiMH battery packbattery charger

Required accessories:Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger.Scope of delivery:Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body painted body.

Tamiya is delighted to welcome the 1992 Audi V8 Touring as a model on our popular TT-02 chassis. The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi's famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring.About the Model• This is a 1/10 R/C model assembly kit. Length: 463mm, width: 188mm, height: 138mm. Wheelbase: 257mm.• The powerful, imposing body is molded accurately in lightweight and durable polycarbonate (clear). • Stickers are included to recreate the markings for the 1992 Audi V8 Touring. Masking stickers will aid in the paint job.• Two-piece mesh wheels have silver color rims and spokes. They are paired with racing slick tires.• Separate parts are included to depict side mirrors.• The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly.• 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride.• A wealth of Hop-Up Option parts is available to tune the TT-02 chassis to your needsScope of delivery:Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body

- This is a 1/14 scale R/C model assembly kit. Length: 420mm, width: 187mm, height: 188mm.- The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape.- Separate polycarbonate rear fender and coupler parts, moulded plastic side mirrors and 2-piece rear bumper.- Included stickers recreating the sponsors and livery of the #1 truck for the 2018 season, driven by Adam Lacko.- Black moulded wheels and 70mm diameter radial tires are specifically designed for racing truck models.- Features moulded parts compatible with 5mm taillight LEDs in separately-sold Tamiya LED Light Unit.- The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability.- A wide range of option parts is available to tune the TT-01 Type-E chassis.- Torque Tuned Motor & ESC Included

A Fighter, and a Winner!The 2WD buggy The Frog will be a model familiar to many who joined in the first R/C boom of the 1980s. Now, it serves as the inspiration for this new model, the Neo Fighter Buggy. At home both on- and off-road, this 2WD buggy features a lightweight yet tough monocoque frame that protects vital equipment such as the servo and battery from damage; its long form also offers great stability. Coupled with friction dampers and 4-wheel double wishbone suspension, it means the Neo Fighter Buggy performs well even on difficult off-road surfaces. Such a combination of hassle-free assembly and high-performance, light-on-its-feet handling is sure to recommend this model not only to fans of the past, but also to the next generation of R/C racers!DT-03 Chassis: Great Fun, Minimum FussThe stylish slimline form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to friction dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.Specifications- Length: 400mm, Width: 248mm, Height: 132mm - Wheelbase: 287mm - Tread (Front/ Rear): 221mm/208mm - Tire Width/Diameter: 27/80mm (Front), 41/86mm (Rear) - Monocoque Frame - Rear Wheel 2WD - 3-Bevel Differentials - 2-Piece Steering Tie-Rod - Front & Rear Double Wishbone Suspension - Gear Ratio = 9.28:1 - Type 540 Motor - Requires electronic speed controller (sold separately)Separately Required Items- 2-Channel R/C Unit with ESC- - Battery Pack & Charger - R6/AA/UM3 batteries for transmitter

Tamiya is delighted to announce another production of Item 47446, which is based upon the TT-02B buggy chassis featuring superb accessibility and high rigidity. The eye-catching pre-cut body is pre-painted in PS-23 Gun Metal, which is a popular color among R/C fans!Features:This is a 1/10 scale R/C model assembly kit. Length: 370mm, width: 250mm, height: 160mm.The stylish polycarbonate single-seater buggy body and wing are pre-painted in PS-23 Gun metal.The TT-02B chassis is the buggy evolution of Tamiya's popular 4WD entry level unit, the TT-02 chassis.Bathtub-type frame has longitudinal battery and R/C mechanism placed flat for low center of gravity.4-wheel double wishbone suspension features long arms and CVA shock units, and is combined with high grip square spike tires to give excellent traction.Stickers share the Item 58630 design and color scheme.Front and rear gearboxes have differentials to ensure smooth cornering.

Are you ready to build a beast ground up part by part with your bare hands? Not wanting to drive it today and looking for a cheaper alternative? Great value added with motor and servo included in box! You found it! The Official PUBG Buggy is in KIT form!!!Build this awesome vehicle the way you like and get it ready to slash around terrain to ambush your enemy and go after Buggies, Pick Up's and Military Vehicles. Epic journeys await!FEATURESUnique Off-road Buggy DesignGenuine official PUBG Buggy with internal & driver details2wd drivetrain with high impact steel dog bones.Modular Tough Tub Chassis with under carry battery traySturdy Roll Cage w/ mounting chairsUnique front-lay shock tower systemAdjustable ShocksDirect Drive Brushed Motor system33:97:1 3-Gear TransmissionChassis mounted steering servoAll metal shield ball bearing setNEEDED TO COMPLETELi-ion 850mAh BATTERYBRUSHED WATERPROOF ESC2.4G RADIO SET