Marchi RC: Traxxas, Absima, DF Models, Corally & Tamiya

REVO Silver Aluminum Rear Shock Mount

fits on:TRAXXAS REVO

Pinion 48DP 19T, Steel

Suitable for XRAY, Traxxas Rustler, Stampede, Slash, Bandit

Pinion 48DP 26T, Steel

Suitable for XRAY, Traxxas Rustler, Stampede, Slash, Bandit

Pinion 48DP 38T, Steel

Suitable for XRAY, Traxxas Rustler, Stampede, Slash, Bandit

Pinion 48DP 40T, Steel

Suitable for XRAY, Traxxas Rustler, Stampede, Slash, Bandit

Pinion 48DP 42T, Steel

Suitable for XRAY, Traxxas Rustler, Stampede, Slash, Bandit

Pinion 48DP 43T, Steel

Suitable for XRAY, Traxxas Rustler, Stampede, Slash, Bandit

AKA Racing 1/8 Wheel Adapter Fastener Set Slash

Instandhaltungs-Kit für AKA33001.

1:14 Hyper GO Breaker ProDrift 4WD Brushless GPS

The next addition to our popular Hyper Go series: the Breaker ProDrift-1.4 with top-of-the-range equipment in 1:14 scale. Performance, body and driving characteristics set new standards in the vehicle category of this size. A 2845 3700KV brushless motor is available as the drive, which distributes its power to all four wheels via solid metal drive shafts. The built-in CVD shafts are mounted on ball bearings and ensure backlash-free transmission of power to the high-grip rubber tyres or drift tyres, which are included in the scope of delivery. Also made of metal are the chassis and gears as well as the differentials.For maximum control and fine-tuning of the Hyper Go Breaker ProDrift, adjustable oil-pressure metal shock absorbers, adjustable suspension and a driving stability system (gyro) are also included. The built-in 45A ESC provides sensitive response during acceleration and the built-in LED lighting with different modes also allows for drifts and on-road racing at dusk. The digital 17g steering servo also ensures good cornering control and stable directional stability. Thanks to the 2.4GHz system, operation with several vehicles at the same time is possible.As a small bonus, a Dust Cover (mud flap) is included, which is placed over the entire middle section inside the vehicle to prevent moisture, dirt and mud from penetrating as far as possible. For long driving times with maximum power, a 2000mAh 7.4V Li-Ion battery and a matching charger are included. The driving time is thus up to 12 minutes.HIGHLIGHTS:Maximum durability: thanks to high-quality metal chassis and metal drive components4WD drive with CVD drive shafts: Even better traction and direct power transmission to all wheelsFURTHER FEATURES:RTR version (ready-to-run) incl. remote control, battery, chargerFully ball bearing mounted vehicle for smooth drive performanceLED lightingPolycarbonate chassis dust coverSturdy metal main strut for added rigidityAdjustable metal oil pressure shock absorbersIndividual components consisting of ESC, servo, gyro and servo for easy repair and parts accessibilityAll plastic parts made of composite plastic for better durability TECHNICAL DATA:Scale: 1:14Length: 320mmWidth: 153mm Height: 115mmWeight: 1124g incl. batteryWheelbase: 190mmTrack width front: 128mmTrack width rear: 128mmGround clearance: 15mmFront wheels: Outer diameter/width 58/22mmRear wheels: Outer diameter/width 58/22mmRim diameter: 42mmFront shocks: 65mmRear shocks: 65mmBrake: ElectronicReceiver incl. Gyro function (driving stability system)ESC: 45A brushless Motor: 2845 3700KVDrive system: CardanDrive system: 4WDSteering servo: Digital 17gMain material: Metal / Composite plasticBattery compartment dimensions: 86 x 38 x 32mmBattery: Li-Ion, 2S 7.4V 2000mAh 15C, round cells, Deans connectorBattery dimensions: 70 x 36 x 20mmBattery weight: 99gRide time: 10-12minTop speed: 40-45km/hRemote control: 4-channel, 2.4GHzRange: 100-150mCharger: LiPo chargerSCOPE OF DELIVERY:ModelRemote controlBatteryChargerDrift tyresStreet tyresOff-road tyresGyroAccessoriesREQUIRED ACCESSORIES:2x 1.5V AA batteries for the remote control

Citroen C3 WRC Rally RTR 1:14 Hyper Go

Hyper Go Citroën C3 WRC Rallye/Drift 4WD 1:14 RTR L'Hyper Go Citroën C3 WRC 1:14 RTR è un modello RC altamente dettagliato progettato per gli appassionati di rally e drift. Con il suo potente motore brushless, componenti metallici durevoli e funzionalità moderne come luci LED e stabilizzazione giroscopica, questo veicolo è perfetto per gare emozionanti su diverse superfici. Caratteristiche principali: Replica realistica della Citroën C3 WRC Trasmissione 4WD per una trazione ottimale Motore brushless 2845 3700KV potente Differenziali metallici e trasmissione con cuscinetti a sfera Ammortizzatori in alluminio riempiti di olio per una sospensione eccellente Luci LED anteriori e posteriori Sistema giroscopico integrato per drift stabili Include pneumatici da drift aggiuntivi Contenuto: Modello RC Citroën C3 WRC pronto all'uso Sistema di radiocomando a 2,4 GHz Batteria Li-Ion 7,4V 2000mAh Caricabatterie Pneumatici da drift aggiuntivi Protezione antipolvere Manuale utente Accessori necessari: Due batterie AA da 1,5V per il trasmettitore Specifiche tecniche: Scala: 1:14 Trasmissione: 4WD Motore: Brushless 2845 3700KV Ammortizzatori: Alluminio, riempiti di olio Batteria: Li-Ion 7,4V 2000mAh Radiocomando: 2,4 GHz Durata: Fino a 15 minuti Tempo di ricarica: Circa 2 ore

Hyper GO Buggy brushless 3S 4WD 1:16 RTR blue

Amewi Hyper GO Buggy brushless 3S 4WD 1:16 RTR blue The Hyper GO Buggy brushless 3S 4WD 1:16 RTR is a high-performance RC buggy that combines speed, precision, and fun in a compact format. Powered by a brushless motor, the buggy reaches speeds of up to 62 km/h, offering excellent traction and control on various terrains with its 4WD drivetrain. Main Features: Top Speed: Up to 62 km/h Drive: 4WD for optimal traction Motor: Brushless system for maximum performance Controller: 2.4 GHz interference-free Body: Durable and aerodynamic design in blue Technical Specifications: Scale: 1:16 Battery: 3S Li-Ion (included) Runtime: Up to 20 minutes Charging time: Approx. 120 minutes Recommended age: 14+

1:16 Hyper GO Monstertruck 4WD Brushless blue

Push the throttle hard off-road and still never lose control - the Hyper Go monster truck in 1:16 scale accelerates up to 45 km/h with its 2845 brushless racing motor and ensures precise handling with regulation options. These include two adjustable top speed settings, a fast steering servo for agile direction changes, adjustable aluminium oil-pressure shock absorbers, adjustable suspension and an adjustable wheelie bar. Metal CVD drive shafts, metal propshaft and 45A brushless controller incl. active fan round off the equipment.The entire electronics are protected against splash water and allow unrestricted outdoor use. The large high-grip tyres made of soft rubber ensure full grip on any surface. In addition, the model is equipped with a bright switchable LED light for great action even in the dark. The handy 3-channel remote control transmits all functions without interference and also allows the operation of several models in parallel thanks to the 2.4 GHz system. The model is available as an RTR (Ready-to-Run) package, which means that all components - except for household batteries for the remote control - are already included.HIGHLIGHTS:Adjustable chassis: For more directional stability on the front axleMetal cardan shaft: For wear-free drive to the metal differentialsMetal CVD drive shafts: For direct drive to the wheelsOTHER FEATURES:2S LiPo power with 7.4V, 25C and 1050mAh in a hardcase battery specially developed for the seriesProfessional brushless racing motor for high speeds of up to approx. 45km/hFast steering servo for agile directional changes on any surfaceRobust body with internal body frame for high strengthComposite chassis for good durabilityPartial aluminium shock absorbersMetal propshaftFull ball bearingsHigh ground clearance (approx. 40mm)Bonnet with body clips and rubber tabs for safe removalBright switchable LED lighting fittedAdjustable wheelie bar includedTECHNICAL DATA:Scale: 1:16Length: 310mmWidth: 225mmHeight: 125mmWeight: 1048g incl. batteryWheelbase: 175mmTrack width front: 215mmTrack width rear: 215mmGround clearance: approx. 40mmFront wheels: outer diameter/width 80/45mmRear wheels: outside diameter/width 80/45mm Rim diameter: 50mmGearbox: MetalFront shock absorber: 60mmRear damper: 60mmBrake: ElectronicESC: Brushless 45AMotor: 2845 BrushlessDrive system: Cardan metalSteering servo: MiniMain material: Composite plasticBattery compartment dimensions: 110x35x24mmBattery: LiPo 2S 7.4V 1050mAh, 25C, Hardcase, Deans connector / T-Plug, 78x34x29mm, 74gDrive time: up to 12minTop speed: up to 45km/hRemote control: 3-channel, 2,4GHzRange: approx. 100mCharger: USB-Balancer charger with 7,4V 1,5A output powerSCOPE OF DELIVERY:VehicleRemote controlBatteryUSB charging cableWheelie barScrew setToolsInstruction manual DE/ENREQUIRED ACCESSORIES:2x AA Mignon batteries for the remote control

AMXRacing 1151MG Mini Digital Servo 3,6Kg waterproof

AMXRacing 1151MG Mini Digital Servo 3,6Kg wasserdichtArbeitsfrequenz:1000-2000 = 90°Arbeitsfrequenz: 500-2500 = 180°Motor: CoreGeschwindigkeit (4,8V): 0,12sec/60°Geschwindigkeit (6,0V): 0,1sec/60°Stellkraft(4,8V): 3,1kg/cmStellkraft (6,0V): 3,6kg/cmAbmessungen: 23,2 x 12,5 x 25,6mmGewicht: 15gAnschlusskabel Länge: 310mmKugellager: KeineGetriebe: MetallGehäuse: KunststoffAlternative zu Traxxas #2065

APL LiPo 7,4V/6000/30C TRX

Antenna Mount (1)

Team Corally SSX-125 Car Kit 7075 Edition Chassis Kit Only

Team Corally SSX-125 7075 Edition 1/12 Pan Car Kit7075-Aluminium-Chassis – ultraleicht und extrem stabil1/12 Wettbewerbs-Pancar-Kit für höchste Renn-PerformancePräzisionskomponenten mit optimierter AufhängungsgeometrieSehr niedriges Schwerpunktdesign für maximale KurvenstabilitätKit-Version ohne Elektronik – freie Wahl bei Motor, Servo und Regler

Team Corally SSX-125 Car Kit Carbon Edition Chassis Kit Only

Team Corally SSX-125 Carbon Edition 1/12 Pan Car KitCarbon-Chassis – extrem leicht und dennoch hochstabil1/12 Wettbewerbs-Pancar-Kit für maximale PerformanceOptimierte Fahrwerksgeometrie für präzises LenkverhaltenNiedriger Schwerpunkt für beste KurvenlageKit-Version ohne Elektronik – individuelle Konfiguration möglich

Team Corally SBX-425 Racing Buggy Kit 1:10 4WD

Scopri il Team Corally SBX-425: Buggy da competizione 1:10 per prestazioni estremeIl Team Corally SBX-425 è un buggy da competizione 4WD in scala 1:10, progettato per offrire prestazioni eccezionali su qualsiasi pista. Con un telaio in alluminio 7075-T6 anodizzato duro e componenti di alta qualità, questo kit è ideale per i piloti esperti che cercano il massimo in termini di velocità, controllo e durata.Caratteristiche principaliTelaio in alluminio 7075-T6: offre rigidità e resistenza superiori per una guida precisa.Ammortizzatori Big-Bore in alluminio: con tappi di spurgo per un'ammortizzazione uniforme e un'aderenza costante su ogni superficie.Geometria delle sospensioni ottimizzata: garantisce prestazioni elevate in qualsiasi condizione di pista.Differenziali a ingranaggi in acciaio: anteriori e posteriori, per una trasmissione affidabile e duratura.Componenti da competizione: alberi di trasmissione CVD, torri degli ammortizzatori in fibra di carbonio da 4 mm, barre antirollio e supporto motore flottante inclusi.Specifiche tecnicheScala: 1:10Tipo: Buggy elettrico 4WDLunghezza: 410 mmAltezza: 158 mmInterasse: 287 mmCarreggiata anteriore: 248 mmCarreggiata posteriore: 244 mmAltezza da terra: 40 mmPeso (senza batteria): 900 gVano batteria: 47x95x25 mmAmmortizzatori: anteriori 78,5 mm, posteriori 90 mm, diametro 14 mmTrasmissione: 4WD con differenziali a ingranaggi e frizione centraleRapporto interno: 2.5Passo dentatura: 48DPCorona: 81 dentiSupporti bracci inferiori: alluminio 7075-T6 da 5 mm con inserti compositiTorri ammortizzatori: fibra di carbonio 3K da 4 mmCarrozzeria: policarbonato trasparente pretagliatoContenuto della confezioneKit chassis da competizione non assemblatoCarrozzeria in policarbonato trasparente pretagliata con maschere per finestrini e foglio adesiviAla posteriore in policarbonatoCerchi anteriori e posteriori (senza pneumatici)Manuale d'istruzioni dettagliatoFoglio per setupComponenti necessari (non inclusi)Motore brushless 1/10 da 17.5T a 5.5TESC brushless 1/10Servo sterzoSistema radio (trasmettitore + ricevitore)Batteria LiPo 2S ShortyPneumaticiOlio per differenziali e ammortizzatoriGrassiVernice per la carrozzeriaStrumenti per l'assemblaggioCon il Team Corally SBX-425, sei pronto a dominare la pista con un buggy progettato per vincere.

Team Corally SBX-825 7075 Edition 1/8 Racing Buggy Kit

Team Corally SBX-825 7075 Edition 1/8 Racing Buggy KitRobuster 7075-Aluminium-Chassisrahmen für maximale Stabilität und Steifigkeit1/8 Wettbewerbs-Buggy-Bausatz – präzise Komponenten für ambitionierte FahrerVerstärkte Querlenker und Heavy-Duty-Aufhängung für höchste Belastungen auf der RennstreckeOptimierte Geometrie für exzellentes Kurvenverhalten und SprungkontrolleKomplettes Kit zum Eigenaufbau – ermöglicht individuelle Motor- und Elektronik-Konfiguration

Battery ESC Tray Composite (1)

Battery Strap Hook & Loop (2)

1:8 Wingmount V2

1:8 Wingmount Center Adapter V2

Hub Rear Composite (1)