Traxxas Automodelli
1:14 Hyper GO Breaker ProDrift 4WD Brushless GPS
The next addition to our popular Hyper Go series: the Breaker ProDrift-1.4 with top-of-the-range equipment in 1:14 scale. Performance, body and driving characteristics set new standards in the vehicle category of this size. A 2845 3700KV brushless motor is available as the drive, which distributes its power to all four wheels via solid metal drive shafts. The built-in CVD shafts are mounted on ball bearings and ensure backlash-free transmission of power to the high-grip rubber tyres or drift tyres, which are included in the scope of delivery. Also made of metal are the chassis and gears as well as the differentials.For maximum control and fine-tuning of the Hyper Go Breaker ProDrift, adjustable oil-pressure metal shock absorbers, adjustable suspension and a driving stability system (gyro) are also included. The built-in 45A ESC provides sensitive response during acceleration and the built-in LED lighting with different modes also allows for drifts and on-road racing at dusk. The digital 17g steering servo also ensures good cornering control and stable directional stability. Thanks to the 2.4GHz system, operation with several vehicles at the same time is possible.As a small bonus, a Dust Cover (mud flap) is included, which is placed over the entire middle section inside the vehicle to prevent moisture, dirt and mud from penetrating as far as possible. For long driving times with maximum power, a 2000mAh 7.4V Li-Ion battery and a matching charger are included. The driving time is thus up to 12 minutes.HIGHLIGHTS:Maximum durability: thanks to high-quality metal chassis and metal drive components4WD drive with CVD drive shafts: Even better traction and direct power transmission to all wheelsFURTHER FEATURES:RTR version (ready-to-run) incl. remote control, battery, chargerFully ball bearing mounted vehicle for smooth drive performanceLED lightingPolycarbonate chassis dust coverSturdy metal main strut for added rigidityAdjustable metal oil pressure shock absorbersIndividual components consisting of ESC, servo, gyro and servo for easy repair and parts accessibilityAll plastic parts made of composite plastic for better durability TECHNICAL DATA:Scale: 1:14Length: 320mmWidth: 153mm Height: 115mmWeight: 1124g incl. batteryWheelbase: 190mmTrack width front: 128mmTrack width rear: 128mmGround clearance: 15mmFront wheels: Outer diameter/width 58/22mmRear wheels: Outer diameter/width 58/22mmRim diameter: 42mmFront shocks: 65mmRear shocks: 65mmBrake: ElectronicReceiver incl. Gyro function (driving stability system)ESC: 45A brushless Motor: 2845 3700KVDrive system: CardanDrive system: 4WDSteering servo: Digital 17gMain material: Metal / Composite plasticBattery compartment dimensions: 86 x 38 x 32mmBattery: Li-Ion, 2S 7.4V 2000mAh 15C, round cells, Deans connectorBattery dimensions: 70 x 36 x 20mmBattery weight: 99gRide time: 10-12minTop speed: 40-45km/hRemote control: 4-channel, 2.4GHzRange: 100-150mCharger: LiPo chargerSCOPE OF DELIVERY:ModelRemote controlBatteryChargerDrift tyresStreet tyresOff-road tyresGyroAccessoriesREQUIRED ACCESSORIES:2x 1.5V AA batteries for the remote control
Citroen C3 WRC Rally RTR 1:14 Hyper Go
Hyper Go Citroën C3 WRC Rallye/Drift 4WD 1:14 RTR L'Hyper Go Citroën C3 WRC 1:14 RTR è un modello RC altamente dettagliato progettato per gli appassionati di rally e drift. Con il suo potente motore brushless, componenti metallici durevoli e funzionalità moderne come luci LED e stabilizzazione giroscopica, questo veicolo è perfetto per gare emozionanti su diverse superfici. Caratteristiche principali: Replica realistica della Citroën C3 WRC Trasmissione 4WD per una trazione ottimale Motore brushless 2845 3700KV potente Differenziali metallici e trasmissione con cuscinetti a sfera Ammortizzatori in alluminio riempiti di olio per una sospensione eccellente Luci LED anteriori e posteriori Sistema giroscopico integrato per drift stabili Include pneumatici da drift aggiuntivi Contenuto: Modello RC Citroën C3 WRC pronto all'uso Sistema di radiocomando a 2,4 GHz Batteria Li-Ion 7,4V 2000mAh Caricabatterie Pneumatici da drift aggiuntivi Protezione antipolvere Manuale utente Accessori necessari: Due batterie AA da 1,5V per il trasmettitore Specifiche tecniche: Scala: 1:14 Trasmissione: 4WD Motore: Brushless 2845 3700KV Ammortizzatori: Alluminio, riempiti di olio Batteria: Li-Ion 7,4V 2000mAh Radiocomando: 2,4 GHz Durata: Fino a 15 minuti Tempo di ricarica: Circa 2 ore
Hyper GO Buggy brushless 3S 4WD 1:16 RTR blue
Amewi Hyper GO Buggy brushless 3S 4WD 1:16 RTR blue The Hyper GO Buggy brushless 3S 4WD 1:16 RTR is a high-performance RC buggy that combines speed, precision, and fun in a compact format. Powered by a brushless motor, the buggy reaches speeds of up to 62 km/h, offering excellent traction and control on various terrains with its 4WD drivetrain. Main Features: Top Speed: Up to 62 km/h Drive: 4WD for optimal traction Motor: Brushless system for maximum performance Controller: 2.4 GHz interference-free Body: Durable and aerodynamic design in blue Technical Specifications: Scale: 1:16 Battery: 3S Li-Ion (included) Runtime: Up to 20 minutes Charging time: Approx. 120 minutes Recommended age: 14+
1:16 Hyper GO Monstertruck 4WD Brushless blue
Push the throttle hard off-road and still never lose control - the Hyper Go monster truck in 1:16 scale accelerates up to 45 km/h with its 2845 brushless racing motor and ensures precise handling with regulation options. These include two adjustable top speed settings, a fast steering servo for agile direction changes, adjustable aluminium oil-pressure shock absorbers, adjustable suspension and an adjustable wheelie bar. Metal CVD drive shafts, metal propshaft and 45A brushless controller incl. active fan round off the equipment.The entire electronics are protected against splash water and allow unrestricted outdoor use. The large high-grip tyres made of soft rubber ensure full grip on any surface. In addition, the model is equipped with a bright switchable LED light for great action even in the dark. The handy 3-channel remote control transmits all functions without interference and also allows the operation of several models in parallel thanks to the 2.4 GHz system. The model is available as an RTR (Ready-to-Run) package, which means that all components - except for household batteries for the remote control - are already included.HIGHLIGHTS:Adjustable chassis: For more directional stability on the front axleMetal cardan shaft: For wear-free drive to the metal differentialsMetal CVD drive shafts: For direct drive to the wheelsOTHER FEATURES:2S LiPo power with 7.4V, 25C and 1050mAh in a hardcase battery specially developed for the seriesProfessional brushless racing motor for high speeds of up to approx. 45km/hFast steering servo for agile directional changes on any surfaceRobust body with internal body frame for high strengthComposite chassis for good durabilityPartial aluminium shock absorbersMetal propshaftFull ball bearingsHigh ground clearance (approx. 40mm)Bonnet with body clips and rubber tabs for safe removalBright switchable LED lighting fittedAdjustable wheelie bar includedTECHNICAL DATA:Scale: 1:16Length: 310mmWidth: 225mmHeight: 125mmWeight: 1048g incl. batteryWheelbase: 175mmTrack width front: 215mmTrack width rear: 215mmGround clearance: approx. 40mmFront wheels: outer diameter/width 80/45mmRear wheels: outside diameter/width 80/45mm Rim diameter: 50mmGearbox: MetalFront shock absorber: 60mmRear damper: 60mmBrake: ElectronicESC: Brushless 45AMotor: 2845 BrushlessDrive system: Cardan metalSteering servo: MiniMain material: Composite plasticBattery compartment dimensions: 110x35x24mmBattery: LiPo 2S 7.4V 1050mAh, 25C, Hardcase, Deans connector / T-Plug, 78x34x29mm, 74gDrive time: up to 12minTop speed: up to 45km/hRemote control: 3-channel, 2,4GHzRange: approx. 100mCharger: USB-Balancer charger with 7,4V 1,5A output powerSCOPE OF DELIVERY:VehicleRemote controlBatteryUSB charging cableWheelie barScrew setToolsInstruction manual DE/ENREQUIRED ACCESSORIES:2x AA Mignon batteries for the remote control
Hyper GO Fury Pro Brushless Truck 1/16 gray
MANIAC Hyper GO Fury Pro - Potenza e Precisione Definitive Scopri un divertimento di guida senza limiti con il MANIAC Fury Pro Brushless Monster Truck! Questo potente truck RC in scala 1:16 è perfetto per i veri appassionati dell'off-road. Con una velocità massima mozzafiato fino a 45 km/h e un telaio estremamente robusto rinforzato a nido d'ape, il MANIAC Fury Pro garantisce prestazioni impareggiabili su qualsiasi terreno. Caratteristiche principali: Motore Brushless 2845: Il potente motore da 4200KV assicura un'accelerazione impressionante e la massima efficienza. Batteria LiPo 2S: Goditi fino a 12 minuti di tempo di guida grazie alla batteria LiPo ad alte prestazioni da 1050mAh. Servo sterzo extra veloce: Il servo installato offre un tempo di risposta eccezionale di soli 0,10 secondi e una coppia di 2,1 kg, perfetto per applicazioni che richiedono tempi di reazione rapidi e un controllo preciso. Ammortizzatori ad olio in alluminio: Sperimenta il massimo controllo e stabilità con ammortizzatori di alta qualità riempiti d'olio, che forniscono una sospensione ottimale e migliorano la maneggevolezza del veicolo su terreni accidentati, salti o curve strette. Elettronica resistente agli spruzzi: Rende il truck resistente a sporco, acqua e polvere, permettendo l'uso anche in condizioni difficili. Barra luminosa a LED: Illuminazione extra-luminosa che può essere accesa e spenta tramite il telecomando, consentendo un divertimento di guida anche al buio. Differenziali in metallo e alberi di trasmissione CVD: Componenti durevoli per carichi estremi e trasmissione di potenza ottimale. Elevata altezza da terra: Con 40 mm di altezza da terra, il Maniac Fury Pro supera facilmente qualsiasi ostacolo. Unità di trasmissione completamente chiusa: L'unità di trasmissione chiusa offre vantaggi significativi in termini di manutenzione e protezione, proteggendo la trasmissione da sporco, polvere e umidità. Specifiche tecniche: Scala: 1:16 Lunghezza: 310 mm Larghezza: 225 mm Altezza: 125 mm Peso: 1048 g (inclusa la batteria) Interasse: 175 mm Altezza da terra: 40 mm Larghezza carreggiata anteriore/posteriore: 215 mm Ruote anteriori/posteriori: 80x45 mm Motore: Motore Brushless 2845 da 4200KV ESC: Regolatore Brushless da 45A Telecomando: 3 canali 2,4 GHz Scomparto batteria: 110x35x24 mm Batteria: Batteria LiPo Hardcase 7,4V 1050mAh con connettore T-Plug Sistema di trasmissione: Albero di trasmissione in metallo Velocità massima: Fino a 45 km/h Tempo di funzionamento: Fino a 12 minuti Portata del telecomando: Circa 100 metri Contenuto della confezione: MANIAC Fury Pro Brushless Monster Truck Telecomando 3 canali 2,4 GHz Batteria LiPo Hardcase 7,4V 1050mAh con connettore T-Plug Caricabatterie USB per 2s LiPo con corrente di carica massima di 1,5A Wheelie-Bar Strumenti e manuale d'istruzioni (DE/EN) Accessori necessari (non inclusi): 2 batterie AA per il telecomando Adattatore di alimentazione USB (2A raccomandati)