Summit Tuning

Revo Alu Steering Servo Holder

Alternative zu Traxxas #5345R

Revo Alu Servo Protector (2)

Alternative zu Traxxas #5315

E-Revo 2.0 Alloy Motor Mount With Heat Sink Fins

Alternative zu Traxxas #5660

E-Revo 2.0 Alloy Front Rocker Arm Set (2)

Alternative zu Traxxas #5358

E-Revo 2.0 Alloy Rear Rocker Arm Set (2)

Alternative zu Traxxas #5358

E-Revo 2.0 Alloy Rear Damper Mount

Alternative zu Traxxas #5317

Revo Alu Rear Skid Plate

Alternative zu Traxxas #5337

Silver Ball Type Aluminum Shock Ends (2)

Alternative zu Traxxas #5469Alternative zu Traxxas #5462

Rear horizontal Pivot ball suspension (2+2)

19lb gunmetal high lift springs (2)

This is Gunmetal color, 7.5 turn, 50mm long, 2.3 mm wire, preload lift springs 19 LB/in Traxxas Nitro Revo Truck, Hot Racing cold-coiled springs are designed to support your Traxxas Revo with a little extra lift. These springs will help raise your truck after adding heavy duty upgrades. Adding these springs will add 5 to 10 percent more ground clearance to your Traxxas REVO.

18lb Blue Fast On-Rd Springs (2)

This is Shiny blue color, 8 turn, 50mm long, 2.3 mm wire, preload lift springs 18 LB/in Traxxas Nitro Revo Truck,Hot Racing cold-coiled springs are designed to support your Traxxas Revo with a little extra lift. These springs will help raise your truck after adding heavy duty upgrades. Adding these springs will add 5 to 10 percent more ground clearance to your Traxxas REVO.FEATURES:These springs are 5mm longer than the stock Traxxas Revo springs this will change the preload position of spring adjuster to the top, and provides the Revo GTS shock a wider range of suspension adjustment.Spring Steel Plated chrome then powder coated with then with a distinctive chip-resistant Shiny blue color finishSPECIFICATIONS:Weight Rating 18 LB/in8 turn,50mm longINCLUDES:Two SpringsREQUIREMENTS:Assembly onto VehicleCOMMENTS:Coil springs can be either "hot-coiled" or "cold-coiled". Cold-coiled springs are more precise, Hot Racing cold coiled springs are wound from pre-heat treated spring wire stock. Many so call performance springs are cold-coiled from annealed "bundle stock" then quenched and tempered after coiling.This method produces a less accurate spring and can result in surface imperfections. After coiling, the closed ends are ground, Completed springs are inspected, powder-coated or plated then checked for dimensions, trueness and rate

Steel Helical Spiral Differential Ring/Pinion Gear Set (29t/10t)

- For six cell power Aluminum Outer Diff Case is a must; Revo and T-Maxx use RVO11L06, Summit use SUM11LH- Not intended for on road operation if the differential is replaced with a spool or lockerAlternative zu Traxxas #5379X

Power Double Up Slipper system LG

Alternative zu Traxxas #5351

Graphite Slipper Clutch Kit Traxxas

This is a Graphit Slipper Clutch for the Traxxas Revo and T-Maxx.FEATURES:Up grade your stock slipper clutchesYOU WILL RECEIVE:(3) Pads

Multi-Function Aluminum Wrench Traxxas

8mm ((M5 Lock Nut) Socket hex For the Revo T-Maxx Wheel7mm (M4 Lock Nut) Socket hex For 1/10 Wheel and 2wd Slipper4mm turnbuckle wrench for most 2WD Traxxas stock turnbuckle5mm turnbuckle wrench for most 4WD Traxxas stock turnbuckle

TRX4 Summit Aluminum Control Link Servo Arm

Alternative zu Traxxas #5669

Replacement Pro-Spline HD Female Drive Shaft

Extended Front & Rear Body Mounts Revo/Summit

Komplett höhenverstellbare Karosseriehalter für den Traxxas Revo/Summit/Slayer. Die Karosserie wird nicht wie üblich mit einem Splint fixiert sondern verschraubt.Alternative zu Traxxas #5314

Extended Right Rear A-arms - Black

Tech Notes: RPM Extended Rear A-arms are replacements for Traxxas stock #5333R. 6mm bumper mount spacers (not included) and M3 x 16mm screws (not included) may be necessary if installing these in place of standard wheelbase a-arms. Please review the installation instructions via "Downloads" at RPM for technical information regarding the installation of these a-arms.Alternative zu Traxxas #5333R

Extended Left Rear A-arms - Black

Tech Notes: RPM Extended Rear A-arms are replacements for Traxxas stock #5333R. 6mm bumper mount spacers (not included) and M3 x 16mm screws (not included) may be necessary if installing these in place of standard wheelbase a-arms. Please review the installation instructions via "Downloads" at RPM for technical information regarding the installation of these a-arms.Alternative zu Traxxas #5333R

Traxxas Short Rod Ends Black (12)

Alternative zu Traxxas #5347

Traxxas Short Rod Ends Blue (12)

Alternative zu Traxxas #5347

Slash 4x4 Steel Spur 32dp/54T+15T

Stahl-Hauptzahnrad mit RitzelAdapter wird in silber geliefert!Alternative zu Traxxas #3956

Slash 4x4 Steel Spur 32dp/54T+16T

Stahl-Hauptzahnrad mit RitzelAdapter wird in silber geliefert!Alternative zu Traxxas #3956