1:7 AMXRacing RXB7 Buggy black 4WD RTR

Super Scale Dune Buggy in 1:7 scale with finest equipment and a top speed of up to 130km/h (optional with 8S LiPo). The RXB7 combines very high-quality components with an extreme drive concept and top equipment such as 2x 3S LiPo batteries included, a high-quality and precise 2.4GHz remote control, a LiPo charger and many milled aluminium parts. A handbrake controlled via the transmitter, which allows the vehicle to drift perfectly into corners on dusty tracks, is just one highlight of this brute buggy. The unbridled power of the 4282 brushless motor with a specific speed of 2000KV is finely controlled via a 150A regulator and is distributed via steel cardan shafts to the differentials and from there via steel CVD drive shafts to the 4 wheels (4WD). The powerful steering servo with metal gears and an actuating force of 25kg always ensures maximum performance and a very direct steering response on any surface. The two shock towers, the wishbone brackets, steering arms and C-hubs as well as the chassis strut are CNC-machined from high-quality aluminium. The chassis plate is made of solid 4mm thick aluminium and ensures perfect rigidity of the chassis.
Main gear and differential gears are made of steel and guarantee a long service life. All gearbox parts are CNC milled for maximum accuracy of fit.
To prevent overheating, both the motor and the 150A brushless controller are equipped with fans to counteract the heat generated during operation. The mechanical brake of the model is controlled by a 15kg metal gear servo and this can be used in addition to the electric brake of the controller to bring the model into a perfect drift angle. For a very good balance of the vehicle and perfect grip level of the specially developed 165mm tyres provide in addition to the fully adjustable chassis, the massive oil pressure shock absorbers.
The beautiful body of the model made of sturdy polycarbonate is also visually an absolute gem, which gives the model a very aggressive and off-road typical look. The RXB7 is equipped with an LED lighting system, which can not only be switched on and off via the transmitter, but also allows different lighting modes. A very brightly illuminated light bar on the roof of the buggy ensures perfect illumination of the track.

HIGHLIGHTS:
CNC-machined steel gears - For best performance, durability and power transmission, the HC7's gear parts are CNC-machined from high-strength steel.
150A ESC - a custom-programmed brushless controller is used for smooth control of the 2000KV brushless motor.
Complete servo controlled brake system (handbrake).
FURTHER FEATURES:

Solid, torsionally stiff 4mm aluminium chassis - for stable handling
CNC-machined aluminium front and rear shock towers
Double aluminium chassis bracing
High-quality and hardened steel CVD drive shafts
All gearbox parts are CNC-machined from high-quality steel
Steering knuckles and steering arms made of milled aluminium
Vehicle fully ball bearing mounted
Front and rear suspension can be easily and precisely adjusted and optimised for different surfaces.
Water-protected receiver box
Tyres with perfect rubber compound for racing and drifting
Machined aluminium wishbone brackets for maximum durability
High-performance brushless motor with 2000KV and double fan
High-power regulator with 150A and XT90 connector
2x 3S LiPo battery with 5000mAh and XT90 connector
Metal gear servos for steering and handbrake
High-quality 4 channel 2.4GHz remote control with maximum range and sensitive control

TECHNICAL DATA:
Scale: 1:7
Length: 680mm
Width: 380mm
Height: 225mm
Weight: approx. 6,2kg
Wheelbase: 419mm
Track width front: 330mm
Track width rear: 320mm
Ground clearance: 55mm
Front wheels: Outer diameter/width 165 / 63mm
Rear wheels: Outer diameter/width 165 / 63mm
Rim diameter: 90mm
Gearbox: Steel
Gear ratio: 15:1
Front shocks: 102mm
Rear damper: 102mm
Brake: electronic and brake disc via 15kg metal gear servo controlled
ESC: 150A ESC with XT90 connector
Motor: 4282 brushless motor with 2000KV
Drive system: metal cardan shaft
Steering servo: Standard servo with metal gearbox and 25kg actuating force
Main material: metal
Battery compartment dimensions: 140 x 45 x 50mm
Battery: 2x LiPo, 3S, 11,1V, 5000mAh 35C, Softcase XT90 connector LxWxH: 140x40x25mm Weight: 350g
Driving time: approx. 10 - 15 min
Top speed: up to max. 130km/h (with 2x 4S LiPo batteries optional)
Remote control: 4 channel 2,4GHz remote control
Range: max. 400m
Charger: BX3 Balancer charger 220V
Charging time: approx. 3 - 4 hours per battery

SCOPE OF DELIVERY:
Model
Transmitter
2x battery 3S LiPo
Charger
Decal sheet
Manual DE/EN

REQUIRED ACCESSORIES:
4x AA Batteries for Transmitter