RC Truggies – the stable mix of buggy & truck
Truggies combine a low buggy chassis with wide truck tyres. The result: high stability on jumps and at speed – ideal for new and experienced bashers.


1:10 Z-10 Competition Truggy BR brushed RTR
- 40 km/h
- 1:10
- 4WD
- Brushed
- RTR
1:10XL Line V2 ... sets new standards!The new Z-10 models of the 1:10XL V2 Line from DF Models have been developed over countless days, weeks and months from the experience gained from the 10,000 tried and tested 1:10XL Line models and set new standards that have probably never been seen before at such a price! The plastic quality has been catapulted to a new level, the electronics have been redeveloped and significantly upgraded. These now include a 60 ampere controller, 10 KG XXL metal gear servo and a remote control that allows a maximum speed to be selected (100-75-50 %). Features such as 4WD drive, robust differentials, XXL oil pressure shock absorbers, 17mm wheel drivers and a chassis with very high side panels (so less dirt can get into the model) are standard on our model!The models are powered by a powerful brushed motor, the brand new, high-quality DF Models DF-1060 speed controller with 60 amps of power and a 7.2 volt NiMH battery, so the model accelerates to approx. 40 km/h. The DF-1000D 10 kg steering servo with XXL metal gearbox provides sufficient power in every situation.The maximum speed can be reduced by remote control using a switch function on the remote control (maximum speed 100 - 75 - 50 % adjustable!). This makes the model ideal for beginners to get into RC sport!Scope of delivery:RC-Truggy RTR2.4 GHz remote controlNiMH drive battery - 7.2 Volt - 3500 mAhUSB charging cableInstruction manualTechnical data:Scale: 1:10XL RTRDrive: 4WD brushedLength: 500 mmWidth: 360 mmHeight: 230 mmWheelbase: 300 mmSpeed: up to 40 km/h


1:10 Z-10 Competition Truggy BL brushless RTR
- 80 km/h
- 1:10
- 4WD
- Brushless
- RTR
1:10XL Line V2 ... sets new standards!The new Z-10 models of the 1:10XL V2 Line from DF Models have been developed over countless days, weeks and months from the experience gained from the 10,000 tried and tested 1:10XL Line models and set new standards that have probably never been seen before at such a price! The plastic quality has been catapulted to a new level, the electronics have been redeveloped and significantly upgraded. These now include a 120 amp brushless controller, 15 KG XXL steel gear servo and a remote control that allows a maximum speed to be selected (100-75-50 %). Features such as 4WD drive, robust steel differentials, XXL oil pressure shock absorbers, 17mm wheel drivers, wheelie bar and a chassis with very high side panels (so less dirt can get into the model) are standard on our model! The Z-10 BL (brushless) models can be operated with a 2, 3 or 4S LiPo battery (not included). In 4S mode, the wheelie bar already fitted is absolutely essential to prevent the model from rolling over and to bring the power to the ground. Such brute power at this price-performance ratio has never been seen before! The models are powered by a powerful brushless motor, the brand new, high-quality DF Models DF-120BL brushless controller (programmable via Bluetooth module, optionally available no. 1240) with 120 amps of power, allowing the model to accelerate up to 80 km/h. The DF-1500D 15 kg steering servo with XXL steel gearbox provides sufficient power in every situation.The maximum speed can be reduced by remote control using a switch function on the remote control (maximum speed 100 - 75 - 50 % adjustable!). This makes the model ideal for beginners to get into RC sport!Scope of delivery:RC truggy2.4 GHz remote controlInstruction manualTechnical data:Scale: 1:10XLDrive: 4WD brushlessLength: 500 mmWidth: 360 mmHeight: 230 mmWheelbase: 300 mmSpeed: up to 80 km/h possible


1:8 Vorza S Truggy Flux 6S RTR
- 1:8
- 4WD
- Brushless
- RTR
- 6S
1/8th Scale 4WD Electric Truggy with FLUX Brushless System, 2.4GHz Radio System and Painted BodyFactory-assembled & pre-painted 4WD 1/8 scale CarPre-painted body with awesome speed graphicsPre-mounted all-terrain tiresHigh torque IP67 rated waterproof servo6S LiPo CapableMLH-2200 2200KV brushless motor with 5mm shaftWaterproof 150A ELH-6S speed controllerLiPo ready adjustable battery tray with secure hook-and-loop strapsAluminum heatsink motor mount help the motor stay cool with optional fan mounting pointsFull-time 4WD for excellent controlEfficient and tough shaft drivetrain with front universalsAluminum 16mm Big Bore oil-filled shocks for confident control7075 Aluminum shock towers front and rear7075 suspension blocks front and rearThick steel turnbucklesFront and rear sway bars for excellent handlingHardened steel spur and pinion gear for extreme durabilitySpiral-cut bevel gears for the best balance of strength and efficiencyTough oil-filled 4-gear differentialsSuspension based on World Championship pedigreeSuper low CoG for superior handlingTotal adjustability: roll centre, wheelbase, camber, sway bar and moreNylon stone and dirt guards keep rocks out of the chassisDual bellcrank steeringCam type servo saverAll hex head hardwareFull set of rubber-sealed ball bearings2.4GHz Radio Set with waterproof receiverSPECIFICATIONS:Length: 580mm Width: 408mm Height: 200mmWheelbase: 375mmDrivetrain: Shaft 4WDWHAT YOU NEED:4S or 6S Lipo with Deans PlugCharger4 AA Batteries for TransmitterWHAT YOU NEED:4S or 6S Lipo with Deans PlugCharger4 AA Batteries for Transmitter


MJX Hyper Go 14212 1/14 Brushless Truggy 4WD RTR
- 56 km/h
- 1:14
- 4WD
- Brushless
- RTR
MJX Hyper Go 14212 - 1/14 Brushless Truggy with Full Metal Drivetrain56 km/h top speed, 4WD and a full metal drivetrain - the MJX Hyper Go 14212 is a 1/14 scale hobby-grade truggy that fits anywhere. At 310 mm long with 94 mm tyres, it tackles backyards, gravel paths, dirt lots and grass. The 2852 Brushless motor pairs with the E45P 45A Brushless ESC, ready to run on 2S out of the box and upgradeable to 3S. An aluminium heatsink with fan and a waterproof receiver box ensure lasting performance.Top Features of the Hyper Go 14212 Brushless TruggyBrushless Power: 2852 Brushless motor with E45P 45A Brushless ESC, 2S-3S capable, up to 56 km/hFull Metal Drivetrain: Metal driveshafts, metal CVD axles, chrome steel gears, metal differential, full ball bearing setAluminium Oil-Filled Shock Absorbers: Oil-filled dampers all round for superior stability on rough terrainActive Motor Cooling: Aluminium heatsink with fan for stable performance during long full-throttle runsWaterproof Receiver Box: Electronics protected against puddles, wet grass and damp groundT3D 2.4GHz Radio: Fully proportional throttle and steering with trim, approx. 120 m range - includedTwo Body Shells: Both pre-painted - one mounted, one as spareTechnical SpecificationsScale: 1:14 | Drive: 4WDMotor: 2852 Brushless with aluminium heatsink and fanESC: E45P 45A Brushless (2S-3S capable)Steering Servo: 19g digital servo, 2.2 kg/cm, metal gearBattery: 7.4V 3000mAh 25C LiPo (included)Run Time: approx. 13 minutes | Charge Time: approx. 330 minutes (USB)Dimensions: 310 x 225 x 127 mm | Wheelbase: 198 mm | Track Width: 195 mmTyre Diameter: 94 mm | Weight: 1350 gPackage Contents and Additional RequirementsIncluded: Pre-assembled Hyper Go 14212 (RTR), 7.4V 3000mAh LiPo battery, T3D 2.4GHz transmitter, USB charging cable, second body shell, hex wrench, screwdriver, front and rear body mounts, front suspension arms (4x), 7-point wrench (3x), rear wing unit, wheelie bar, body clips (4x), damper springs (4x), manualAdditionally required: 2x AA batteries for the transmitter


MJX Hyper GO 16212 1:16 4WD Off-Road Truggy Brushless RTR
- 1:16
- 4WD
- Brushless
- RTR
MJX Hyper GO 16212 - 1:16 Brushless Truggy with 4WDThe MJX Hyper GO 16212 is an agile 1:16 4WD off-road truggy with brushless drive and a full-metal drivetrain. The powerful 2845 brushless motor combined with the E45A2 45A brushless ESC delivers explosive acceleration and a punchy driving feel on almost any surface. Thanks to its low centre of gravity, oil-filled shock absorbers and mountable wheelie bar, the 16212 offers stable handling during jumps, drifts and full-throttle runs.Features of the Hyper GO 16212Brushless drive: 2845 motor with E45A2 45A brushless ESCFull-metal drivetrain: metal driveshaft, metal CVD shafts, metal differentialsPowder metallurgy gears for high load capacityOil-filled shock absorbers for controlled driving behaviourFull ball bearing set for reduced wearMountable wheelie bar (anti-flip wheels at rear)LED front lightingT3D 2.4 GHz radio system with light control, fully proportional17g digital servoRange approx. 100-120 mTechnical SpecificationsScale: 1:16Drive: 4WDMotor: Brushless 2845ESC: E45A2 45A BrushlessServo: 17g digital servoBattery: 2S LiPo 7.4V 2000 mAhBattery connector: T-plugRemote control: T3D 2.4 GHz, fully proportional, with light controlLighting: LED frontRange: approx. 100-120 mPackage ContentsMJX Hyper GO 16212 (RTR, ready to run)T3D 2.4 GHz remote control (included)2S LiPo 2000 mAh drive battery (included)USB charger (included)Wheelie bar with screwsTools (hex key, screwdriver)ManualNotesBatteries for the remote control may be required - please refer to the included manual. Optional accessories include a spare battery 2S MX-B2S20 and an optional 3S battery for even more performance.

Average rating of 5 out of 5 stars

1:8 Sledge blue Truggy RTR
- 115 km/h
- 1:8
- 4WD
- Brushless
- RTR
TRAXXAS SLEDGE 1/8 Brushless Monster Truck 4x4With the SLEDGE, TRAXXAS completely redefines the 1/8 offroad class and raises it to a new level."SLEDGE - DOMINANCE in 1/8 Offroad NEWLY DEFINED”With the SLEDGE, TRAXXAS delivers a model with superior performance, significantly improved durability and first-class quality that the enthusiastic off-road driver longs for.Countless hours of development and testing have gone into this truck to eliminate weak points and ensure the highest standards. The result is pure perfection!The SLEDGE is the new benchmark in 1/8 offroad and leaves the competition far behind!LATEST TECHNOLOGIES - OUTSTANDING DURABILITY - HIGHEST QUALITYDetails at a glance:- Aggressive body design- Pinless body mounting design- Color-matched aluminum parts - chassis, shocks, shock towers, T-bar, wheel hubs- Ultra-stiff anodized 3.2mm chassis with T-bar brace- Heavy duty cardan and drive shafts especially for 6s power- Oversized diff gears (20% larger & 75% stronger)- 15Z/52HZ gear ratio adapted to belted tires- Use of the highest quality materials- VXL-6S brushless power system with 2000kV BL motor- TQi 2.4GHz 2-channel remote control system- TSM - TRAXXAS Stability Management- Digital High-Torque 347 servo with metal gears (actuating force 35kg/cm - 7.4V!)- Optimized aluminium motor mount (no flex or movement possible)- Foldable battery holder for a secure fit and easy replacement of the LiPos- Heavy-duty C-hubs (no impractical pivot ball suspension)- Anodized GT-Maxx aluminum shock absorbers- Fixed tie rods for maximum durability (no adjustment possible in crashes)- Sledgehammer belted 6.7” Extreme Offroad tires for maximum durability with 6s power- Waterproof electronics box- Top speeds of up to 115km/h (with 6s LiPo and optional 18Z/46HZ)Dimensions:Length: 604mmWidth: 459mmHeight: 214mmGround clearance: 50mmWheelbase: 384mmWeight: 5.77kg (without battery)Tire size: 6.7” 170 x 84mmRim size: 3.8” 97mmGear ratio: 17.2 (13Z/52HZ module 1)Battery dimensions for narrow configuration: L181mm x W50mm x H29/37/45mmBattery dimensions for wide configuration: L160mm x W57mm x H29/37/45mmNecessary accessories:- 2x drive battery LiPo 3s 11.1V 5000mAh- Charger for LiPo batteries- 4x AA batteries for transmitter
Truggy – Electric RC Models for Dirt, Speed & Jumps
Truggies are hybrid RC vehicles built for aggressive driving. They offer high ground clearance, wide stance, and strong components to handle racing and rough terrain with ease.
Why choose a Truggy?
- Electric-powered – brushed or brushless
- 4WD or 2WD drivetrains
- Popular scales: 1:8, 1:10, 1:16
Top brands include Team Corally, Absima, Traxxas – with full parts & upgrade support.
What is a truggy?
A truggy is a mix of buggy and truck: it has the low, long chassis of a buggy but a wider track and big truck tyres. This makes it very stable at high speed and after jumps – ideal for bashing on grass, gravel and dirt roads. Compared to a buggy it is less agile, compared to a monster truck lower and faster in corners.
1:8 or 1:10 truggy?
1:10 truggies such as the Absima AT3.4 or the DF Models FighterTruggy are compact and affordable; small models in 1:14 to 1:16 fit into any garden. 1:8 truggies such as the Team Corally Shogun or the HPI Vorza S are the big beasts for 6S power and the race track.
Brushless power and matching batteries
Many truggies are available as brushed and as brushless versions. Brushless models with 3S to 6S LiPo reach high speeds – you will find the fastest under fast RC cars. Which batteries fit is stated for each model.
Frequently asked questions
Who is a truggy suitable for?
For anyone who wants speed and jumps but more stability than a buggy – ideal for bashing on grass and gravel.
Can you race a truggy?
Yes, the 1:8 class has its own truggy racing classes.
