Traxxas Slash EHD Front assembly – Exploded View
TRX2745 Nuts, 3mm nylon locking (12) TRX5529 Shim set (for adjusting Jato roll center)/ hollow balls (for inner camber links) (4) TRX8361 Shock caps (black) (4) TRX8361 Shock caps (black) (4) TRX5347 Rod ends, Revo (large) with hollow balls (12) TRX3745 Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls) (fits Rustler) TRX2362 Shock rebuild kit (for 2 shocks) TRX1765 Silicone diaphragms (4) TRX3139X Turnbuckles aluminum red 59mm (2) TRX4859 Flathead engine mount screws 3x10, hex head, machine TRX2362 Shock rebuild kit (for 2 shocks) TRX3139A Turnbuckles aluminum blue 59mm (2) TRX3768 Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2)) TRX3767 Shock caps (2)/ shock bottoms (2) TRX4859 Flathead engine mount screws 3x10, hex head, machine TRX2362 Shock rebuild kit (for 2 shocks) TRX1942 Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) TRX9136-GRAY Caster-Blocks left/right gray TRX9136-BLUE Caster-Blocks left/right blue TRX5857 Springs, front (white) (progressive rate) (2) TRX9137-BLUE steering lever left/right blue TRX9136-GRN Caster-Blocks left/right green TRX5857P Springs Front (Pink) (Progressive Rate) (2) TRX5347 Rod ends, Revo (large) with hollow balls (12) TRX1664 Shock shafts, steel, chrome finish (long) (2) TRX1664 Shock shafts, steel, chrome finish (long) (2) TRX9137-GRN steering lever left/right green TRX5529 Shim set (for adjusting Jato roll center)/ hollow balls (for inner camber links) (4) TRX3931 Screws, 3x8mm flat-head machine (hex drive) (6) TRX1664T Shock shafts, hardened steel, Titanium Nitride coated (long) (2) TRX5858 Springs, rear (white) (progressive rate) (2) TRX9136 Caster-Blocks left/right black TRX5858P Springs Rear (Pink) (Progressive Rate) (2) TRX2656 Shock shafts, steel, chrome finish (xx-long) (2) TRX2656 Shock shafts, steel, chrome finish (xx-long) (2) TRX6519 Receiver, micro, TQ 2.4GHz 3 channel TRX8361 Shock caps (black) (4) TRX2656T Shock shafts, hardened steel, titanium nitride coated (xx-long) (2) TRX2593 Screws 3x14mm Button-Head Machine (Hex Drive) (6) TRX1985 Teflon washers, 5x8x0.5mm (20) (use with ball bearings) TRX2583 Screws, 3x18 button-head machine (hex drive) (6) TRX2362 Shock rebuild kit (for 2 shocks) TRX3769 Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2) TRX2583 Screws, 3x18 button-head machine (hex drive) (6) TRX3654 Wheel hubs, hex (tall offset, Rustler/Stampede front) (2)/ axle pins (2.5x12mm) (2) TRX2745 Nuts, 3mm nylon locking (12) TRX5462 Rebuild kit, GTR shock (x-rings, bump stops, bladders, all pistons, piston nuts, shock rod ends) renews 2 shocks TRX1942 Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) TRX3760A Ultra-Shocks grey long (2) TRX5862 Big Bore shocks, Slash (4) TRX2075 Servo, digital high-torque (ball bearing), waterproof TRX3768 Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2)) TRX3765A Body, Ultra Shock (long) (grey) (2) TRX3744X Servo Saver +Adapter TRX3644 Turnbuckles, camber link, 39mm TRX2579 Screws, 3x15mm button-head machine (hex drive) (6) TRX3766A Body, Ultra Shock (XXL) (grey) (2) TRX5529 Shim set (for adjusting Jato roll center)/ hollow balls (for inner camber links) (4) TRX3737 Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/hollow balls (2)(See part 3741X for complete camber link set) TRX2754 Stub axle pins (4) TRX3737A Turnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1)(assembled w/rod ends)/hollow balls (2)(See part 3741A for complete camber link set) TRX2742X Rod Ends, short (6)/ hollow balls (6) TRX5116 5x11x4mm Ball bearings blue rubber sealed (2) TRX2593 Screws 3x14mm Button-Head Machine (Hex Drive) (6) TRX3768 Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2)) TRX3646 Screws, 3x15mm flat-head machine (hex drive) (6) TRX2742 Rod ends (long) (6)/ hollow ball connectors (6) TRX8361 Shock caps (black) (4) TRX1942 Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) TRX3637 Axles (front) (2) TRX2593 Screws 3x14mm Button-Head Machine (Hex Drive) (6) TRX2742X Rod Ends, short (6)/ hollow balls (6) TRX1935 Turnbuckles, 36mm (2) TRX2579 Screws, 3x15mm button-head machine (hex drive) (6) TRX5529 Shim set (for adjusting Jato roll center)/ hollow balls (for inner camber links) (4) TRX5525 Rod ends (12)/ hollow balls (12) (fits Jato, includes 4 hollow balls for inner camber link) TRX3644 Turnbuckles, camber link, 39mm TRX2583 Screws, 3x18 button-head machine (hex drive) (6) TRX3760A Ultra-Shocks grey long (2) TRX2579 Screws, 3x15mm button-head machine (hex drive) (6) TRX3639 Shock tower (front) TRX3640 Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete suspension pin set) (Rustler, Stampede, Bandit) TRX3646 Screws, 3x15mm flat-head machine (hex drive) (6) TRX3640 Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete suspension pin set) (Rustler, Stampede, Bandit) TRX1633 E-clips/ C-rings TRX2742 Rod ends (long) (6)/ hollow ball connectors (6) TRX2579 Screws, 3x15mm button-head machine (hex drive) (6) TRX2742X Rod Ends, short (6)/ hollow balls (6) TRX3937 Screws, 4x12mm button-head machine (hex drive) (6) TRX2579 Screws, 3x15mm button-head machine (hex drive) (6) TRX3644 Turnbuckles, camber link, 39mm TRX3644 Turnbuckles, camber link, 39mm TRX3737 Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/hollow balls (2)(See part 3741X for complete camber link set) TRX3631 Suspension arms (front) (2) TRX3631 Suspension arms (front) (2) TRX3737A Turnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1)(assembled w/rod ends)/hollow balls (2)(See part 3741A for complete camber link set) TRX2640 Suspension pins, 44mm (2) w/ E-clips TRX3631A Suspension arms front blue heavy duty (2) TRX3631A Suspension arms front blue heavy duty (2) TRX5525 Rod ends (12)/ hollow balls (12) (fits Jato, includes 4 hollow balls for inner camber link) TRX2583 Screws, 3x18 button-head machine (hex drive) (6) TRX5822 Chassis, Slash TRX3631G Suspension arms front green heavy duty (2) TRX3631G Suspension arms front green heavy duty (2) TRX2530-GRAY Gray Front Bulkhead TRX5822A Chassis, Slash, black TRX3631R Suspension arms front red heavy duty (2) TRX3631R Suspension arms front red heavy duty (2) TRX2530-BLK Bulkhead front black TRX3631T Suspension arms front orange heavy duty (2) TRX2754 Stub axle pins (4) TRX1633 E-clips/ C-rings TRX3631T Suspension arms front orange heavy duty (2) TRX3631X Suspension arms front black heavy duty (2) TRX3631X Suspension arms front black heavy duty (2) TRX1633 E-clips/ C-rings TRX3654 Wheel hubs, hex (tall offset, Rustler/Stampede front) (2)/ axle pins (2.5x12mm) (2) TRX5529 Shim set (for adjusting Jato roll center)/ hollow balls (for inner camber links) (4) TRX3637 Axles (front) (2) TRX2532 Tie bar, fiberglass TRX9137-BLUE steering lever left/right blue TRX2640 Suspension pins, 44mm (2) w/ E-clips TRX9137-GRN steering lever left/right green TRX2578 Screws, 3x12mm button-head machine (hex drive) (6) TRX2557 Screws 3x30mm cap-head machine (hex drive) (6) TRX1985 Teflon washers, 5x8x0.5mm (20) (use with ball bearings) TRX6519 Receiver, micro, TQ 2.4GHz 3 channel TRX3640 Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete suspension pin set) (Rustler, Stampede, Bandit) TRX5837 Skidplates, front & rear (black) TRX2579 Screws, 3x15mm button-head machine (hex drive) (6) TRX1633 E-clips/ C-rings TRX3743 Steering bellcranks (l&r)/ draglink TRX3743A Steering bellcranks, drag link (blue-anodized T6 aluminum)/ 5x8mm ball bearings (4) hardware (assembled) TRX2746 Washers, 3x6mm metal (12) TRX2578 Screws, 3x12mm button-head machine (hex drive) (6) TRX5347 Rod ends, Revo (large) with hollow balls (12) TRX3743P Aluminum Steering Bellcranks Pink-Anodized TRX2579 Screws, 3x15mm button-head machine (hex drive) (6) TRX3743X Steering bellcranks, drag link (red-anodized T6 aluminum)/ 5x8mm ball bearings (4) hardware (assembled) TRX9136-GRAY Caster-Blocks left/right gray TRX2545 Bellcrank bushings (plastic) (5x8x2.5mm) (4) TRX6845X Steering bellcranks/ servo saver TRX9136-BLUE Caster-Blocks left/right blue TRX5116 5x11x4mm Ball bearings blue rubber sealed (2) TRX3640 Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete suspension pin set) (Rustler, Stampede, Bandit) TRX9136-GRN Caster-Blocks left/right green TRX5114 Ball bearings, blue rubber-sealed (5x8x2.5mm) (2) TRX3647 Nuts, 4mm flanged nylon locking (steel, serrated) (8) TRX3937 Screws, 4x12mm button-head machine (hex drive) (6) TRX2745 Nuts, 3mm nylon locking (12) TRX1747A Nuts aluminum flanged serrated (4mm) (red-anodized) (4) TRX3742 Shoulder screws, steering bellcranks (3x30mm hex cap) (2)/ draglink shoulder screws (chrome) (2) TRX1747G Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4) TRX9136 Caster-Blocks left/right black TRX2583 Screws, 3x18 button-head machine (hex drive) (6) TRX3743 Steering bellcranks (l&r)/ draglink TRX1747P Pink-anodized aluminum 4mm flanged serrated lock nuts (4) TRX2745 Nuts, 3mm nylon locking (12) TRX3743A Steering bellcranks, drag link (blue-anodized T6 aluminum)/ 5x8mm ball bearings (4) hardware (assembled) TRX1747R Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4) TRX5529 Shim set (for adjusting Jato roll center)/ hollow balls (for inner camber links) (4) TRX3745 Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls) (fits Rustler) TRX3743P Aluminum Steering Bellcranks Pink-Anodized TRX5529 Shim set (for adjusting Jato roll center)/ hollow balls (for inner camber links) (4) TRX3139X Turnbuckles aluminum red 59mm (2) TRX3743X Steering bellcranks, drag link (red-anodized T6 aluminum)/ 5x8mm ball bearings (4) hardware (assembled) TRX6845X Steering bellcranks/ servo saver TRX2542 Screws, 4x12mm countersunk machine (hex drive) (6) TRX3139A Turnbuckles aluminum blue 59mm (2) TRX1985 Teflon washers, 5x8x0.5mm (20) (use with ball bearings) TRX5347 Rod ends, Revo (large) with hollow balls (12) TRX2583 Screws, 3x18 button-head machine (hex drive) (6) TRX2545 Bellcrank bushings (plastic) (5x8x2.5mm) (4) TRX5114 Ball bearings, blue rubber-sealed (5x8x2.5mm) (2) TRX5835X Bumper front/ bumper mount 2WD Slash LED TRX5835X Bumper front/ bumper mount 2WD Slash LED TRX3937 Screws, 4x12mm button-head machine (hex drive) (6) TRX2542 Screws, 4x12mm countersunk machine (hex drive) (6) Ctrl + mouse wheel to zoom
Front assembly of the Traxxas Slash EHD
The exploded view Front assembly of the Traxxas Slash EHD (58234-8) contains 96 part numbers, 88 of which are available in our shop. Tap a part in the drawing or pick it from the list to see price, delivery time and matching tuning parts.
Other assemblies of this model: Body, Chassis, Rear assembly, Tire Chart, Transmission.
Drawings: Traxxas
Shock shafts, hardened steel, Titanium Nitride coated (long) (2)€11.90*
Available, delivery time: 1-4 days
Nuts aluminum flanged serrated (4mm) (red-anodized) (4)€8.95*
Available, delivery time: 1-4 days
Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)€8.95*
Available in 7 days, delivery time 1-4 days
Pink-anodized aluminum 4mm flanged serrated lock nuts (4)€8.95*
Available in 7 days, delivery time 1-4 days
Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)€8.90*
Available in 7 days, delivery time 1-4 days
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)€7.95*
Available, delivery time: 1-4 days
Teflon washers, 5x8x0.5mm (20) (use with ball bearings)€2.95*
Available, delivery time: 1-4 days
Servo, digital high-torque (ball bearing), waterproof€44.90*
Available, delivery time: 1-4 days
Screws, 4x12mm countersunk machine (hex drive) (6)€2.95*
Available, delivery time: 1-4 days
Bellcrank bushings (plastic) (5x8x2.5mm) (4)€3.95*
Available in 7 days, delivery time 1-4 days
Screws 3x30mm cap-head machine (hex drive) (6)€2.90*
Available, delivery time: 1-4 days
Screws, 3x12mm button-head machine (hex drive) (6)€2.95*
Available in 7 days, delivery time 1-4 days
Screws, 3x15mm button-head machine (hex drive) (6)€2.95*
Available, delivery time: 1-4 days
Screws, 3x18 button-head machine (hex drive) (6)€2.95*
Available, delivery time: 1-4 days
Screws 3x14mm Button-Head Machine (Hex Drive) (6)€3.60*
Available, delivery time: 1-4 days
Shock shafts, steel, chrome finish (xx-long) (2)€3.60*
Available, delivery time: 1-4 days
Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)€12.00*
Available in 7 days, delivery time 1-4 days
Rod ends (long) (6)/ hollow ball connectors (6)€4.90*
Available, delivery time: 1-4 days
Suspension arms front black heavy duty (2)€11.90*
Available in 7 days, delivery time 1-4 days
Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete suspension pin set) (Rustler, Stampede, Bandit)€4.90*
Available, delivery time: 1-4 days
Screws, 3x15mm flat-head machine (hex drive) (6)€3.00*
Available, delivery time: 1-4 days
Nuts, 4mm flanged nylon locking (steel, serrated) (8)€3.90*
Available, delivery time: 1-4 days
Wheel hubs, hex (tall offset, Rustler/Stampede front) (2)/ axle pins (2.5x12mm) (2)€3.60*
Available, delivery time: 1-4 days
Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/hollow balls (2)(See part 3741X for complete camber link set)€6.90*
Available, delivery time: 1-4 days
Turnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1)(assembled w/rod ends)/hollow balls (2)(See part 3741A for complete camber link set)€6.90*
Available, delivery time: 1-4 days
Shoulder screws, steering bellcranks (3x30mm hex cap) (2)/ draglink shoulder screws (chrome) (2)€2.90*
Available, delivery time: 1-4 days
Steering bellcranks, drag link (blue-anodized T6 aluminum)/ 5x8mm ball bearings (4) hardware (assembled)€34.95*
Available in 7 days, delivery time 1-4 days
Aluminum Steering Bellcranks Pink-Anodized€37.95*
Available in 7 days, delivery time 1-4 days
Steering bellcranks, drag link (red-anodized T6 aluminum)/ 5x8mm ball bearings (4) hardware (assembled)€39.90*
Available in 7 days, delivery time 1-4 days
Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls) (fits Rustler)€10.50*
Available in 7 days, delivery time 1-4 days
Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))€3.90*
Available, delivery time: 1-4 days
Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)€4.90*
Available, delivery time: 1-4 days
Screws, 3x8mm flat-head machine (hex drive) (6)€2.95*
Available in 7 days, delivery time 1-4 days
Screws, 4x12mm button-head machine (hex drive) (6)€2.95*
Available in 7 days, delivery time 1-4 days
Flathead engine mount screws 3x10, hex head, machine€1.90*
Available, delivery time: 1-4 days
Ball bearings, blue rubber-sealed (5x8x2.5mm) (2)€4.90*
Available, delivery time: 1-4 days
Rod ends, Revo (large) with hollow balls (12)€10.80*
Available, delivery time: 1-4 days
Rebuild kit, GTR shock (x-rings, bump stops, bladders, all pistons, piston nuts, shock rod ends) renews 2 shocks€5.90*
Available, delivery time: 1-4 days
Rod ends (12)/ hollow balls (12) (fits Jato, includes 4 hollow balls for inner camber link)€9.95*
Available, delivery time: 1-4 days
Shim set (for adjusting Jato roll center)/ hollow balls (for inner camber links) (4)€4.20*
Available, delivery time: 1-4 days
Springs Front (Pink) (Progressive Rate) (2)€5.95*
Available in 7 days, delivery time 1-4 days
Springs, rear (white) (progressive rate) (2)€5.95*
Available in 7 days, delivery time 1-4 days
Springs Rear (Pink) (Progressive Rate) (2)€5.95*
Available in 7 days, delivery time 1-4 days
TRX