1:14 Hyper GO LR14 ProDrift 4WD Brushless Gyro RTR

With its power, build and handling characteristics, the LR14 ProDrift-1.4 from our popular Hyper Go series sets a new benchmark for 1:14 scale in this vehicle category. Power is provided by a 2845 3700KV brushless motor, which distributes its power to all four wheels via solid metal drive shafts. The built-in CVD shafts are mounted on ball bearings and ensure play-free transmission of power to the high-grip rubber tyres or drift tyres, which are included in the scope of delivery. Also made of metal are the chassis and gears as well as the differentials.

For maximum control and fine-tuning of the Hyper Go LR14 ProDrift, adjustable oil-pressure metal shock absorbers, an adjustable suspension and a driving stability system (gyro) are also included. The built-in 45A ESC provides sensitive response during acceleration and the built-in LED lighting with different modes also allows for drifts and rally racing at dusk. The digital 17g steering servo also ensures good cornering control and stable directional stability. Thanks to the 2.4GHz system, operation with several vehicles at the same time is possible.

As a small bonus, a dust cover (mud flap) is included, which is placed over the entire middle section inside the vehicle to prevent moisture, dirt and mud from penetrating as far as possible. An important feature for an RC rally car with drifting capabilities. For long driving times with maximum power, a 2000mAh 7.4V Li-Ion battery and a matching charger are included. This provides up to 12 minutes of driving time.

HIGHLIGHTS:

• Maximum durability: thanks to high-quality metal chassis and metal drive components
• 4WD drive with CVD drive shafts: Even better traction and direct power transmission to all wheels

FURTHER FEATURES:

• RTR version (ready-to-run) incl. remote control, battery, charger
• Fully ball bearing mounted vehicle for smooth drive performance
• LED lighting
• Polycarbonate chassis dust cover
• Sturdy metal main strut for added rigidity
• Adjustable metal oil pressure shock absorbers
• Individual components consisting of ESC, motor, gyro and servo for easy repairs and parts accessibility
• All plastic parts made of composite plastic for better durability

TECHNICAL DATA:

• Scale: 1:14
• Length: 320mm
• Width: 153mm
• Height: 115mm
• Weight: 1221g incl. battery
• Wheelbase: 190mm
• Track width front: 128mm
• Track width rear: 128mm
• Ground clearance: 15mm
• Front wheels: Outer diameter/width 58/22mm
• Rear wheels: Outer diameter/width 58/22mm
• Rim diameter: 42mm
• Front shocks: 65mm
• Rear shocks: 65mm
• Brake: Electronic
• Receiver incl. Gyro function (driving stability system)
• Controller: Brushless ESC 45A
• Motor: 2845 3700KV
• Drive system: Cardan
• Drive system: 4WD
• Steering servo: Digital 17g
• Main material: Metal / Composite plastic
• Battery compartment dimensions: 86 x 38 x 32mm
• Battery: Li-Ion, 2S 7.4V 2000mAh 15C, round cells, Deans connector
• Battery dimensions: 70 x 36 x 20mm
• Battery weight: 99g
• Ride time: 10-12min
• Top speed: 40-45km/h
• Remote control: 4-channel, 2.4GHz
• Range: 100-150m
• Charger: Li-Ion charger

SCOPE OF DELIVERY:

• Model
• Remote control
• Battery
• Charger
• Drift tyres
• Street tyres
• Off-road tyres
• Gyro
• Accessories

REQUIRED ACCESSORIES:
2x 1.5V AA batteries for the remote control