1:16 Revo Electronics

alternative Traxxas #2925

Successor for TRX 2080 ServoIn contrast to the Servo 2080, the gears have been clearly reinforced.

alternative Traxxas #2080

Servo case/ gaskets (for 2080A micro waterproof servo)Replacement case for TRX2080A servo. Does not fit TRX2080 or TRX2080X.

Gear set (for 2080A micro waterproof servo)Replacement gear set for TRX2080A servo. Does not fit TRX2080 or TRX2080X.

Dimensions: 88 x 20 x 35mmWeight: 120g

Total Capacity: 1400 mAhVoltage: 11.1 VC Rating: 25Length: 88mmHeight: 20mmWidth: 35mmPlug: Traxxas ID

SPECS:Length: 94mmWidth: 34mmHeight: 17mmPlug: Traxxas iDCell: 2/3A

EU-Versionno Lipo, only NiMh

Sie können sowohl die alten wie auch die Traxxas ID Stecker anschließen.

Sie können sowohl die alten wie auch die Traxxas ID Stecker anschließen.

SPECS:VXL3m ESC:Input Voltage: 6-12 cells NiMH, 2S to 3S LiPoMotors: Sensorless BrushlessMotor Limit: NoneContinuous Current: 52APeak Current: 326ABEC Voltage: 6.0Volts DCTransistor Type: MOSFETOn-Resistance: 0.0005 ohmsPWM Frequency: 12,000HzWeight: 38g (1.34oz)Motor:Type: Sensorless BrushlessRPM/Volt: 4000 (8-turn)Current Ratings: 25A constant/50A burstMax RPM: 50,000Weight: 140g (4.94oz)Length: 48.15mm (1.9")Diameter: 28mm (1.1")Shaft Diameter: 2.7mm (0.11")

Specs:Type: Sensorless BrushlessRPM/Volt: 4000 (8-turn)Current Ratings: 25A constant/50A burstMax RPM: 50,000Weight: 140g (4.94oz)Length: 48.15mm (1.9")Diameter: 28mm (1.1")Shaft Diameter: 3,17mm (0.11")

Rebuild kit, Velineon 380 (4x9x4mm ball bearings (2), 2x6mm CCS (with threadlock) (2), front shims (2))

SPECS:Input Voltage: 6 to 12 cell NiMH, 2S to 3S LiPo Motors: Sensorless Brushless Motor Limit: None Continuous Current: 52A Peak Current: 326A BEC Voltage: 6.0V DC Transistor Type: MOSFET On-Resistance: 0.0005 ohms PWM Frequency: 12,000Hz Motor Connectors: Traxxas 3.5mm bullet connectors Motor/Battery Wiring: 16-Gauge Thermal Protection: Two-Stage Thermal Shutdown Weight: 38g

SPECS:Can Diameter: 1.25" (38mm) Shaft Diameter: 0.12" (3mm) Length Including Shaft: 3.2" (81mm) Length Not Including Shaft: 2.3" (57.5mm) Specs such as RPM are not provided

(includes power supply front & rear bumpers light harness (4 clear 4 red) wire ties)

LED lights, light harness (4 clear, 4 red)/ bumpers, front & rear/ wire ties (3) (requires power supply #TRX7286X)