Saltar al contenido principal Saltar a la búsqueda Saltar a la navegación principal
en Internet desde 2002
Envío gratuito a la UE* a partir de EUR 400,-

1:10 CR3.4 Crawler Landi gray RTR

Información sobre el producto "1:10 CR3.4 Crawler Landi gray RTR"

The CR3.4 LANDI Scale Crawler is a high-end car loaded with technical features which are unusual for a "ready-to-run" vehicle!

This limited edition comes in a fancy "ABS hard plastic body" with lots of moving parts like doors and engine hood.

In addition, attractive details such as light bowls, radiator grille, wipers, door handles and clear windows so that you can examine the wonderful interior.

Portal axles not only offer a greater distance from the differential housing to the ground than conventional axles, they also have another positive feature. In conventional crawlers, torque applies so much force that the vehicle "jumps" over the obstacle. The design of portal axles reduces the gear ratio at the wheels and virtually eliminates torque shocks from the drive. The overall reduction ratio of the axle drive is more than double that of non-portal designs to ensure a smooth running.

A 15kg digital steering servo with metal gears and 3x 17g mini servos with 0.9kg actuating force for gear ratio and differential lock/unlock are already installed. All servos are waterproof.

CAR SPECS:
Length: 542mm
Width: 250mm
Height: 240mm
Ground Clearance: 53mm
Wheelbase: 313mm
Weight: 2970g
Approach Angle: 60°
Departure Angle: 45°
Steering Angle: 45.8°
Wheels: 12mm Hex Beadlock 1.9" 32x69mm
Tires: 43x120mm
Shock Length: 90mm
Shock Oil Viscosity: 500cps
Transmission: 2-speed (Hi 1/15.1 / Lo 1/37.1), remote shifting
Gear Pitch: Module 0.8/32dp - Pinion 16Z / Spur Gear 44T
Drive System: 4WD

ELECTRONIC SPECS:
ESC: 60A Brushed/Waterproof with T-Plug (BEC 6V@3A, NiMh/LiPo suitable)
Motor: 600 high-torque brushed motor 21T
Steering Servo: 15kg MG, digital and waterproof
Mini Servos: 0,9kg, waterproof
Radio System: 6-channel 2.4GHz radio system (4.8 - 12.0V LiPo suitable)

INCLUDES:
Absima CR3.4 LANDI RTR Model
6-channel 2.4GHz Radio System
Manual (DE/EN/FR)

RECOMMENDED ACCESSORIES:
The CR3.4 LANDI accepts a wide variety of LiPo batteries and NiMH batteries
A charger is required which is dependent on the type of battery
4x AA mignon batteries are required for the radio
Properties "1:10 CR3.4 Crawler Landi gray RTR"
Escala: 1:10
Motor: Brushed
Tracción: 4x4
Typ: Crawler
Versión:: RTR

0 de 0 valoraciones

Calificación promedio de 0 de 5 estrellas

¡Emita una valoración!

Comparta sus experiencias con el producto con otros clientes.


Omitir la galería de productos

Accesorios a juego

RC Plus RC-CHA-212

Calificación promedio de 4.5 de 5 estrellas

Power Plus 80 Charger AC/DC 80 Watt

FEATURES:AC 100 - 230V / DC 11-18VCharge power 80WCharge current 0.1 - 7.0ADischarge power 5WDischarge current 0.1 - 5.0A1 - 6 Li-xx1 - 15 Ni-xx2-20V PBContent;Device12V cable220V cablechargelead Dean-TBattery meter for intern resistanceLCD Display

Número de producto: RC-CHA-212
Disponible en stock

Precio normal: 49,95 €
df Models 1862

Calificación promedio de 5 de 5 estrellas

Car-LiPo 7,4V/5200/45C Deans

- Spannung: 7,4 Volt (2S)- Kapazität: 5200 mAh- C-Rate: 45C- Typ: LiPo- Abmessungen: 138x46x31 mm- Gewicht: 280 g

Número de producto: df-1862
Disponible en stock

Precio normal: 32,95 €
Absima 4100013
NiMH Stick Pack 7,2V 5100mAh T-Plug + Tamiya Adapter

Minimum capacity: 5100mAhPlug system: T-plug including Tamiya adapterHigh-quality single cell shrinkageVoltage: 7.2VMeasure: 135x46x24 mmWeight: 415g

Número de producto: ABS-4100013
Disponible en stock

Precio normal: 31,95 €
HobbyX HX595021D

Calificación promedio de 5 de 5 estrellas

Car Hardcase LiPo Round 7,4V 2S/4000/30C Deans

Länge: 135mmBreite: 45mmHöhe: 24mm

Número de producto: HX595021D
Disponible en stock

Precio normal: 24,95 €