Slash 4x4 LCG Tuning Parts

alternative Traxxas #5379X

Bohrung: 1/8''=3,17mmMadenschraube: inklusiveBeispielabbildungAlternative zu Traxxas #3947

Bohrung: 1/8''=3,17mmMadenschraube: inklusiveAlternative zu Traxxas #3946Alternative zu Traxxas #3949

Water repellent nylon mash construction Protects chassis from from dirt and debris, Vented design is superior to Lexan chassis covers that trap heat. Back elastic to give good fit with plenty of clearance for various electrical and battery configurations. easy access with two zipper and Velcro for the side and front

Aluminum engine mount with 10 x 19 x 5 mm bearing.

Alternative to the original part number from Traxxas #5469Alternative to the original part number from Traxxas #5462

SPECIFICATIONS:Hex size: 12mm Thickness: 0.24" (6mm)

alternative Traxxas #6856X

alternative Traxxas #5853X

Offset from stock wheel hex is +16mm/side.Alternative to the original part number from Traxxas #8227

This is the Hot Racing center one-way Differential transfers power to the front differential under acceleration but allows it and the front diff. to "freewheel" while decelerating or braking. Unlike a front one-way differential, a center one-way allows front differential action.

SPECIFICATIONS:length: (58mm)Turns (11T)Inner diameter: (15mm)Wire diameter: (1.4, 1.5, 1.6mm)

SPECIFICATIONS:length: (72mm)Inner diameter: (15mm)Turns (14T)Wire diameter: (1.4, 1.5, 1.6mm)

- For six cell power Aluminum Outer Diff Case is a must; Revo and T-Maxx use RVO11L06, Summit use SUM11LH- Not intended for on road operation if the differential is replaced with a spool or lockeralternative Traxxas #5379X

Alternative zu Traxxas #6842R

Replace Traxxas Big Bore EX Long Shock TRA2661, 3762, 3762A, 2662length: 105mm (4-1/8") (not compressed)Mounting point 100mm (4")diameter: 19mm (3/4")Steel Shock Shaft 3.5mmSping 1.54mm wireDual rate 13 TurnAccept optional Shock boot if need.Can be use withSLF63FS261SLF63MR268SLF63RS286

Replace Traxxas Big Bore Long Shock TRA2660, 3760, 3760Alength: 95mm (4") (not compressed)Mounting point 90mm (3 5/8")diameter: 19mm (3/4")Steel Shock Shaft 3.5mmSping 1.54mm wireDual rate 10TurnAccept optional Shock boot if need.Can be use withSLF48FS261SLF48MR268SLF48RS286

One Steel slipper pressure plateOne Aluminum slipper hubOne Metallic Friction Materials Super Duty Slipper disk.alternative Traxxas #5351

Replacement Metallic Friction Materials Super Duty Slipper disk for Hot Racing TRX15EX.

One Steel slipper pressure plateOne Aluminum slipper hubOne Metallic Friction Materials Super Duty Slipper disk. alternative Traxxas #5556

8mm ((M5 Lock Nut) Socket hex For the Revo T-Maxx Wheel7mm (M4 Lock Nut) Socket hex For 1/10 Wheel and 2wd Slipper4mm turnbuckle wrench for most 2WD Traxxas stock turnbuckle5mm turnbuckle wrench for most 4WD Traxxas stock turnbuckle