Tamiya

Diese verbesserte Version des TT-02 Chassis enthält eine Fülle von Tuningteilen und einige neue Teile, um es rennfähig zu machen.Die enthaltenen Rennteile verbessern die Radaufhängung, die Motorhalterung, die Antriebswellen, die Differentialausgänge usw.. Dabei enthält die Radaufhängung Metallteile und CVA Öldämpfer. Die Vielseitigkeit und das einfache Fahrverhalten des TT-02 bleiben erhalten.Enthaltene Tuningteile:Neu entwickelte hintere Achsträger aus Aluminium mit 3 Grad VorspurAluminium Motorhalter53159 4mm Aluminum Flange Lock Nut (Blue)53642 5mmAluminum Ball Connector (Blue)54247 3x18mm Aluminum Turnbuckle Shaft (Blue) x254500 TT-02 High-Speed Gear Set (68T)54501 TT-02 Aluminum Propeller Shaft54502 TT-02 Aluminum Propeller JointUber das Modell- RC-Bausatz im Maßstab 1:10- Neu entwickelte hintere Achsträger mit 3 Grad Vorspur bieten größere Stabilität in der Kurve.- Besserer Leichtlauf durch Aluminiumwelle mit Achsaufnahmen.- CVA Öldämpfer in Silber erstmals bei diesem Modell. Es werden schwarze Federn verwendet.- Modische 10-Speichenfelgen sind enthalten.- Bitte beachten Sie, dass Karosserie, Akku, Motor und RC Ausrüstung nicht enthalten sind.

Electric Kits Require- 2ch Radio sys.- Charger- Battery Pack- 8 x AA batteries- Tools

This Tamiya R/C car recreates a classic Audi A4 Quattro Touring car as it raced in 1997. In the late 1990s, manufacturer-backed teams would come to dominate touring car series around the world. One of the most pre-eminent was Audi, which spared no expense in its pursuit of the top of the podium. Using its base A4 quattro as a platform, Audi developed the car significantly and turned it into a race winner. In addition, Audi sought the best drivers from around the world in order to do their creation justice.Tamiya recreates this racer on top of the TT-01 E chassis, which is ideal for beginner kit builders. The original release of this Audi was mounted on the Tamiya TA-03 machine.TT-01 E ChassisThe bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with metal plated wheels developed just for this model; the high sidewalls make for forgiving turns.- 1/10 scale R/C model assembly kit. Length: 454mm, width: 186mm.- Polycarbonate body.- Separate molded parts recreate side mirrors and sporty rear wing.- Stickers are included to recreate markings for both no.5 and no.45 cars (they raced in different touring car series), with masking stickers to help during the paint job.- 18-spoke wheels are molded in Silver, and paired with slick tires.- The TT-01 Type-E chassis features shaft-driven 4WD for easy handling, and great customizability.- A wide range of option parts is available to tune the TT-01 Type-E chassis.- Requires: 2-channel radio, servo, 7.2-7.4volt battery & compatible battery charger, and Tamiya PS paint.

Tamiya is delighted to announce the re-appearance of the classic 1997 Mercedes-Benz CLK-GTR (originally Item 58214), this time on the proven TT-01 Type-E chassis! The actual car was powered by a behemoth of a 6-liter V12 engine; in 1997 it had a highly successful FIA GT Championship season, taking six wins in eleven races on its way to the team (AMG-Mercedes) and driver championships.About the Model- This is a 1/10 scale R/C model assembly kit.- The streamlined form of the car is stylishly recreated in lightweight and durable polycarbonate.- Separate molded parts recreate wing, spoiler and side mirrors.- Stickers are included to recreate markings, with masking stickers to help during the paint job.- Silver wheels are paired with racing slick tires.- The TT-01 Type-E chassis features shaft-driven 4WD for easy handling, and great customizability.- A wide range of Hop-Up Option parts is available to tune the chassis.

Tamiya is delighted to announce another production of Item 47446, which is based upon the TT-02B buggy chassis featuring superb accessibility and high rigidity. The eye-catching pre-cut body is pre-painted in PS-23 Gun Metal, which is a popular color among R/C fans!Features:This is a 1/10 scale R/C model assembly kit. Length: 370mm, width: 250mm, height: 160mm.The stylish polycarbonate single-seater buggy body and wing are pre-painted in PS-23 Gun metal.The TT-02B chassis is the buggy evolution of Tamiya's popular 4WD entry level unit, the TT-02 chassis.Bathtub-type frame has longitudinal battery and R/C mechanism placed flat for low center of gravity.4-wheel double wishbone suspension features long arms and CVA shock units, and is combined with high grip square spike tires to give excellent traction.Stickers share the Item 58630 design and color scheme.Front and rear gearboxes have differentials to ensure smooth cornering.

Required accessories:Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger.Scope of delivery:Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body painted body.

Tamiya Mercedes-Benz C11 1990 Gr.C 2WD (300047484) The Mercedes-Benz C11 1990 Gr.C in 1:10 scale is a highly detailed RC kit from Tamiya. Based on the robust Group-C chassis, this model brings the elegance and performance of a legendary endurance race car to your home track. Features: Unpainted polycarbonate body of the Mercedes-Benz C11 Durable Group-C chassis with ABS plastic tub 2WD rear-wheel drive for high agility Foam tires for optimal traction Ball differential for smooth power distribution RS-540 electric motor included Contents: Mercedes-Benz C11 kit with robust Group-C chassis Unpainted body RS-540 electric motor Detailed, illustrated assembly manual Required Accessories: 2-channel radio control system Steering servo Electronic speed controller 7.2V NiMH or 2S LiPo battery Charger Paints for body decoration

Tamiya welcomes this limited edition version of Item 58718 Toyota Celica GT-Four (ST165) (TT-02) with pre-painted, pre-cut body, pre-cut wheel arches, and pre-made body mount holes, which is great for not only beginners but also veterans.4WD assembly kit, TT-02 Chassis,ESC included, Type 540 Torque-Tuned Motor, prepainted Polycarbonat-body,shaft driven, user guideDétails- This is a 1/10 scale R/C model assembly kit. Length: 450mm, width: 185mm, height: 130mm. Wheelbase: 257mm.- The lightweight, durable 1.0mm thick polycarbonate body realistically captures the sleek form in style.- The kit is based upon the shaft-driven 4WD TT-02 chassis which gives great adaptability with various kinds of setups.- Rally dish wheels molded in white are paired with tread pattern racing radial tires.- Comes with stickers and masking stickers for use in the paint job.- Please note that body requires cutting out, application of stickers, and other work.

Tamiya Porsche 911 GT3 (992) Blue TT-02 The Tamiya Porsche 911 GT3 (992) 1:10 TT-02 offers excellent stability and control. With a detailed body and the robust TT-02 chassis, this model is perfect for beginners and advanced drivers. Key Features: Highly detailed Porsche 911 GT3 body in blue Robust TT-02 chassis for stability and precision 4WD shaft-driven drivetrain for optimal control Torque-Tuned motor for outstanding performance Pre-painted polycarbonate body with additional parts Independent suspension with coil spring dampers Kit Contents: TT-02 chassis assembly kit Pre-painted Porsche 911 GT3 body Electronic speed controller 540 Torque-Tuned electric motor Detailed and illustrated assembly manual Required Accessories (not included): 2-channel radio control system with receiver Steering servo 7.2V NiMH or 2S LiPo battery pack Charger Batteries for the transmitter

Tamiya Midnight Pumpkin Metallic Special (58365) The Tamiya Midnight Pumpkin Metallic Special is a highly detailed 1:12 RC kit. Featuring a chrome-plated body and large monster truck tires, it combines 1950s style with modern RC technology. Features: Chrome-plated ABS plastic body of the 1953 Ford F-100 Durable ABS box frame chassis 2WD rear-wheel drive for high agility Large monster truck tires with V-tread (115 mm) Front independent suspension and rear solid axle Sealed gearbox with differential Wheelie bar for spectacular stunts Contents: Midnight Pumpkin Metallic Special kit Chrome-plated body with decals 540-type electric motor Electronic speed controller Detailed, illustrated assembly manual Required Accessories: 2-channel radio control system Steering servo 7.2V NiMH or 2S LiPo battery Charger Tools for assembly

Der Ford F350, einer der repräsentativsten Pick-Up Trucks aus den USA, ist im Herbst als RC Elektro-Modell im Maßstab 1:10 erhältlich. Wie bei TAMIYA üblich legten die Designer sehr hohen Wert auf die Nachbildung einer naturgetreuen Karosserie, deren imposante und dominante Form durch einen verchromten Motorgrill und Stoßfänger betont wird. Das Leiterrahmen-Chassis besitzt eine Blattfederung und als absolutes Highlight ein 3-Gang Schaltgetriebe, es verleiht dem F350 einen authentischen Antrieb.Über das Modell:inkl. Rutschkupplung zum Schutz des Getriebes im schweren Gelände permanenter 4WD Antrieb garantiert erstklassiges FahrverhaltenMit der neuen Multifunktionseinheit 3-53957 wird der TAMIYA F350 noch realistischer.Bausatz, Elektro

Tamiya Sand Scorcher 2010 (58452) Der Tamiya Sand Scorcher 2010 ist eine Neuauflage des legendären RC-Buggys von 1979. Dieses Modell im Maßstab 1:10 kombiniert den nostalgischen Stil mit moderner RC-Technologie und bietet ein authentisches Fahrerlebnis. Merkmale: Unlackierte weiße Polystyrol-Karosserie, ideal für individuelle Gestaltung 2WD Heckantrieb für hohe Wendigkeit Chassis aus 2 mm dicker FRP-Platte mit Aluminiumverstärkung Unabhängige 4-Rad-Aufhängung mit vorderen Doppel-Schwingenarmen Öldruckstoßdämpfer für geschmeidige Federung Elektronikschutzgehäuse für Akku und Elektronik Kugellagersatz zur Reduzierung von Reibungsverlusten Lieferumfang: Sand Scorcher 2010 Bausatz Unlackierte Karosserie RS-540 Elektromotor Elektronischer Fahrtenregler Detaillierte Bauanleitung Benötigtes Zubehör: 2-Kanal-Fernsteuerung Lenkservo 7,2V NiMH oder 2S LiPo Akku Ladegerät Farben und Lacke Werkzeug für den Zusammenbau

The Integrale will also be available on Tamiya's versatile new TT-02 chassis, which is suited to a wide range of drivers' abilities.About the Model• This is a 1/10 scale R/C assembly kit.• Kit includes FREE BONUS PARTS (Item 53156 Hard Inner Sponge Set) which are for EXPORT ONLY and are subject to the FIRST PRODUCTION.• The model's polycarbonate body accurately recreates that of the real rally car.• The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis.• A wide range of option parts are becoming available to tune and customize TT-02 chassis machines.• The kit includes decorative and masking stickers.• Rally Block tires are fitted to stylish white wheels.• Type 540 Motor included.Technical details:- TT-02 tub frame chassis- 4WD all-wheel drive- central drive shaft- Cone differential f/r with four bevel gears- double wishbones f/r- Toe adjustable front- Independent wheel suspension with friction dampers- electronic speed controller- Electric motor type 540 with air cooling- Motor mount compatible with electric motors type 380- Battery compartment suitable for all battery types- Gear ratio adjustable in 10 steps- robust and detailed polycarbonate body (unpainted)- separate injection molded mirrors and rear spoiler- Variable wheelbase: normal 258 mm (257) mm/short 252 mm- Rally block tread tyres- Decal sheet and painting aids (window masking film) includedTechnical specifications:1:10 scaleLength 407mmWidth 186mmHeight 159mmWheelbase 257mm

The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine.Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving.Includes full ball bearings and CVA (oil-filled) Super Mini shocks.Tamiya Sport-Tuned Motor and Aluminum heat sink is included.Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts.The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios.The skid-shaped underside of the bathtub type frame minimizes contact with the road surface.Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis.Technical details:- TT-02D tub frame chassis- 4WD all-wheel drive- central drive shaft- Cone differential f/r with four bevel gears- double wishbones f/r- completely ball-bearing- Track adjustable, front- Independent suspension- CVA Mini oil pressure shock absorbers (Super Mini)- Electric motor type RS-540 Sport Tuned- Aluminum radiator- Battery compartment suitable for all battery types- Gear ratio adjustable in 10 steps- Variable wheelbase: normal 258 mm (257) mm/short 252 mmTechnical specifications:1:10 scaleLength 376mmWidth approx. 182mmWheelbase 257mmScope of delivery:Kit model with detailed illustrated assembly instructions

A Fighter, and a Winner!The 2WD buggy The Frog will be a model familiar to many who joined in the first R/C boom of the 1980s. Now, it serves as the inspiration for this new model, the Neo Fighter Buggy. At home both on- and off-road, this 2WD buggy features a lightweight yet tough monocoque frame that protects vital equipment such as the servo and battery from damage; its long form also offers great stability. Coupled with friction dampers and 4-wheel double wishbone suspension, it means the Neo Fighter Buggy performs well even on difficult off-road surfaces. Such a combination of hassle-free assembly and high-performance, light-on-its-feet handling is sure to recommend this model not only to fans of the past, but also to the next generation of R/C racers!DT-03 Chassis: Great Fun, Minimum FussThe stylish slimline form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to friction dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.Specifications- Length: 400mm, Width: 248mm, Height: 132mm - Wheelbase: 287mm - Tread (Front/ Rear): 221mm/208mm - Tire Width/Diameter: 27/80mm (Front), 41/86mm (Rear) - Monocoque Frame - Rear Wheel 2WD - 3-Bevel Differentials - 2-Piece Steering Tie-Rod - Front & Rear Double Wishbone Suspension - Gear Ratio = 9.28:1 - Type 540 Motor - Requires electronic speed controller (sold separately)Separately Required Items- 2-Channel R/C Unit with ESC- - Battery Pack & Charger - R6/AA/UM3 batteries for transmitter

Das TAMIYA Modell basiert auf dem Einsteiger-Chassis TT-02. Dieses Chassis basiert auf dem tausendfach bewährtem TT-01 Chassis uns ist besonders stabil und wartungsarm. Mit dem Zusammenbau lernt man fast spielerisch die RC Technik kennen und man wird automatisch zum eigenen Teamchef! Das Modell besitzt einen gekapselten Allradantrieb, Einzelradaufhängung, starken 540er Elektromotor und einen elektronischen Brushless/Brushed Fahrtenregler. Für das TT-02 Chassis sind zahlreiche Tuningteile erhältlich um das Modell noch schneller und stabiler zu machen.Benötigtes Zubehör:Fernsteuerung mit Empfänger, Lenkservo, 7.2V NiMH Akkupack, Ladegerät, Farbe für Lexankarosserie (TAMIYA PS-)

This is an updated version of the classic Plasma Edge buggy body. It features new stickers and a tweaked body design. It is mounted on the easy-to-build and maintenance TT-02B chassis. The TT-02B uses the TT-02 as its base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability.- Torque-tuned motor is included!- The TT-02B Chassis is the buggy evolution of Tamiya's popular 4WD entry level unit, the TT-02 Chassis.- Bathtub-type frame has longitudinal battery and R/C mechanism placed flat for low center of gravity.- 4-wheel double wishbone suspension features long arms and white color CVA shock units, and is combined with high-grip square spike tires to give excellent traction.- Features fluorescent yellow star-dish wheels.- Includes stickers to decorate the body, plus masking stickers for use when painting.- Front and rear gearboxes have differentials to ensure smooth cornering

Der Mercedes-Benz 190E in der Version "debis" fuhr in den 90er Jahren in der deutschen DTM Rennserie.Das TAMIYA-Modell im Maßstab 1:10 auf dem TT-01E Chassis hat einen kräftigen Torque-Tuned Elektromotor und Allradantrieb. Diese Kombination sorgt für schnellen und unkomplizierten Fahrspaß. Die robuste und detailgetreue Polykarbonatkarosserie samt Dekorbogen sowie der elektronische Fahrregler TBLE-02S sind perfekt für RC-Hobbyisten geeignet.Technische Details:- Bausatzmodell- Maßstab 1:10- TT-01 Type E Chassis- 4WD Allradantrieb über Kardanwelle- Einzelradaufhängung vorne/hinten- 4fach Federbeine- Abmessungen: Länge 445 mm, Breite 184 mm- Radstand 257 mm- Super detaillierte Polycarbonat-Karosserie (Transparent) mit Anbauteilen- Mercedes-Benz-Stern und Kühlergrill aus verchromten Kunststoff- Heckspoiler und Spiegel aus Kunststoff detailgetreu nachgebildet- 6-Speichenfelgen mit 26 mm Slick-Reifen- TAMIYA Torque Tuned Motor enthalten- Elektronischer Fahrtregler für Bürsten/Brushed und BrushlessmotorenLieferumfang:Bausatzmodell mit ausführlich bebilderter Aufbauanleitung, Elektronischer brushless/brushed Fahrtenregler TBLE-02S, 540er Elektromotor, Polycarbonatkarosserie

- This is a 1/14 scale R/C model assembly kit. Length: 420mm, width: 187mm, height: 188mm.- The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape.- Separate polycarbonate rear fender and coupler parts, moulded plastic side mirrors and 2-piece rear bumper.- Included stickers recreating the sponsors and livery of the #1 truck for the 2018 season, driven by Adam Lacko.- Black moulded wheels and 70mm diameter radial tires are specifically designed for racing truck models.- Features moulded parts compatible with 5mm taillight LEDs in separately-sold Tamiya LED Light Unit.- The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability.- A wide range of option parts is available to tune the TT-01 Type-E chassis.- Torque Tuned Motor & ESC Included

Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 has been designed and engineered jointly by Ford Performance and Multimatic Motorsports to compete in sports car championship racing series globally, including the IMSA Continental Tire SportsCar Challenge, Pirelli World Challenge GTS/GT4, and GT4 European Series.The Tamiya Ford GT4 faithfully captures this sleek racing car as a 1/10 scale radio control replica. The highly-detailed polycarbonate body sits atop the easy-to-build Tamiya TT-02 chassis that you can customize for added performance!TT-02 Chassis:The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.• 1/10 scale R/C model assembly kit. Length: 459mm.• Polycarbonate body was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate.• Wheel arches are pre-cut out for a simpler body assembly experience.• The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis.• Separately molded plastic components depict rear wing and side mirrors.• Racy 10-spoke wheels are molded in gun metal and paired with slick tires.• Stickers are included to create an original livery, as are masking stickers for use when painting.• Includes Tamiya Torque Tuned Motor.• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit.• Requires: 2-Channel Radio, servo, 7.2-7.4volt battery pack & compatible charger, and Tamiya PS paint.

Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. It recreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributing to driver Hannu Mikkola’s eventual Drivers’ Championship.About the Model• This is a 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm.• The classic quattro A2 body is molded accurately in lightweight and durable polycarbonate.• Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS.• Please note that light cases are compatible with separately sold LEDs; fog lamps are not.• 5-spoke wheels are molded in silver, and paired with racing radial tires.• The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly.• 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride.• An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

The Wild One is a very popular classic from the TAMIYA RC program. This special version "Blockhead Motors" was given some extras: light blue pre-painted body, chrome parts, nets on the windows, plates inten with the race number and a dummy antenna. The design was created by Jun Watanabe who markets his ideas under the brand "Blockhead Motors".- Kit model in scale 1/10- Length: 425mm, width: 225mm, height: 140mm, wheelbase: 255mm- Polycarbonate body, cut out and pre-painted in light blue- A,E,G and rims are chromed- window net, plates at the rear with the race number and dummy antenna- new decal sheet (by Jun Watanabe) in Blockhead-Motors design- chassis in box design- independent suspension on all four wheels- closed gearbox- 540cc electric motorRequired accessories:Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger

Tamiya's designers have crafted the next fun to drive 4WD off-road buggy, the Super Avante! The body comes in the form of a re-imagined Avante. It even shares the fun rear wing moniker, "Being Nuts is Neat!” And, the front of the all-new TD-4 chassis, shares a front horizontal damper layout design, similar to the original Avante, except, this time around, the front dampers are underneath the body. The stylish body was designed by Kota Nezu, who has contributed to a number of popular Tamiya products.TD4 - Low Profile, High PerformanceThe TD4 is a shaft-driven 4WD buggy chassis which employs front inboard suspension for slim, low-profile form. It features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance. The drivetrain uses full bearings, and sealed front/rear gearboxes have built-in ball differentials. Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup. 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shaft upper arms facilitate camber angle adjustment. Two types (high/low) of wing stays are included and star dish wheels are paired with square spike tires which offer superlative grip off-road.- 1/10 R/C assembly kit. Length: 338mm, height: 124mm, width: 246mm. Wheelbase: 283mm.- Polycarbonate body (inspired by the Tamiya classic, Avante) is designed by Japanese designer Kota Nezu of Znug Design.- Newly designed shaft-driven 4WD chassis based on a one-piece monocoque frame. It features the same ball differentials for front and rear, and features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance.- The TD4 chassis also employs a front inboard suspension layout which eliminates the need for a front damper stay and offers slim, low-profile form.- The four-wheel double wishbone suspension system uses CVA oil dampers for fun performance.- Features full ball bearings.- Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup.- Turnbuckle shafts for use with upper arms facilitate camber angle adjustment.- Star dish wheels are paired with square spike tires which offer good grip off-road.- Choose between high and low type wing stays to adjust the downforce depending on the road surface.- Comes with a driver figure for extra realism, and high-torque servo saver.Requires: 2-channel radio, steering servo, ESC, 540-size motor, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint to complete.

Tamiya is delighted to welcome the 1992 Audi V8 Touring as a model on our popular TT-02 chassis. The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi's famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring.About the Model• This is a 1/10 R/C model assembly kit. Length: 463mm, width: 188mm, height: 138mm. Wheelbase: 257mm.• The powerful, imposing body is molded accurately in lightweight and durable polycarbonate (clear). • Stickers are included to recreate the markings for the 1992 Audi V8 Touring. Masking stickers will aid in the paint job.• Two-piece mesh wheels have silver color rims and spokes. They are paired with racing slick tires.• Separate parts are included to depict side mirrors.• The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly.• 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride.• A wealth of Hop-Up Option parts is available to tune the TT-02 chassis to your needsScope of delivery:Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body