Marcas RC: Traxxas, Absima, DF Models, Corally y Tamiya

fits on:TRAXXAS REVO

Suitable for XRAY, Traxxas Rustler, Stampede, Slash, Bandit

Suitable for XRAY, Traxxas Rustler, Stampede, Slash, Bandit

Suitable for XRAY, Traxxas Rustler, Stampede, Slash, Bandit

Suitable for XRAY, Traxxas Rustler, Stampede, Slash, Bandit

Suitable for XRAY, Traxxas Rustler, Stampede, Slash, Bandit

Suitable for XRAY, Traxxas Rustler, Stampede, Slash, Bandit

Instandhaltungs-Kit für AKA33001.

The next addition to our popular Hyper Go series: the Breaker ProDrift-1.4 with top-of-the-range equipment in 1:14 scale. Performance, body and driving characteristics set new standards in the vehicle category of this size. A 2845 3700KV brushless motor is available as the drive, which distributes its power to all four wheels via solid metal drive shafts. The built-in CVD shafts are mounted on ball bearings and ensure backlash-free transmission of power to the high-grip rubber tyres or drift tyres, which are included in the scope of delivery. Also made of metal are the chassis and gears as well as the differentials.For maximum control and fine-tuning of the Hyper Go Breaker ProDrift, adjustable oil-pressure metal shock absorbers, adjustable suspension and a driving stability system (gyro) are also included. The built-in 45A ESC provides sensitive response during acceleration and the built-in LED lighting with different modes also allows for drifts and on-road racing at dusk. The digital 17g steering servo also ensures good cornering control and stable directional stability. Thanks to the 2.4GHz system, operation with several vehicles at the same time is possible.As a small bonus, a Dust Cover (mud flap) is included, which is placed over the entire middle section inside the vehicle to prevent moisture, dirt and mud from penetrating as far as possible. For long driving times with maximum power, a 2000mAh 7.4V Li-Ion battery and a matching charger are included. The driving time is thus up to 12 minutes.HIGHLIGHTS:Maximum durability: thanks to high-quality metal chassis and metal drive components4WD drive with CVD drive shafts: Even better traction and direct power transmission to all wheelsFURTHER FEATURES:RTR version (ready-to-run) incl. remote control, battery, chargerFully ball bearing mounted vehicle for smooth drive performanceLED lightingPolycarbonate chassis dust coverSturdy metal main strut for added rigidityAdjustable metal oil pressure shock absorbersIndividual components consisting of ESC, servo, gyro and servo for easy repair and parts accessibilityAll plastic parts made of composite plastic for better durability TECHNICAL DATA:Scale: 1:14Length: 320mmWidth: 153mm Height: 115mmWeight: 1124g incl. batteryWheelbase: 190mmTrack width front: 128mmTrack width rear: 128mmGround clearance: 15mmFront wheels: Outer diameter/width 58/22mmRear wheels: Outer diameter/width 58/22mmRim diameter: 42mmFront shocks: 65mmRear shocks: 65mmBrake: ElectronicReceiver incl. Gyro function (driving stability system)ESC: 45A brushless Motor: 2845 3700KVDrive system: CardanDrive system: 4WDSteering servo: Digital 17gMain material: Metal / Composite plasticBattery compartment dimensions: 86 x 38 x 32mmBattery: Li-Ion, 2S 7.4V 2000mAh 15C, round cells, Deans connectorBattery dimensions: 70 x 36 x 20mmBattery weight: 99gRide time: 10-12minTop speed: 40-45km/hRemote control: 4-channel, 2.4GHzRange: 100-150mCharger: LiPo chargerSCOPE OF DELIVERY:ModelRemote controlBatteryChargerDrift tyresStreet tyresOff-road tyresGyroAccessoriesREQUIRED ACCESSORIES:2x 1.5V AA batteries for the remote control

Hyper Go Citroën C3 WRC Rallye/Drift 4WD 1:14 RTR El Hyper Go Citroën C3 WRC 1:14 RTR es un modelo RC altamente detallado diseñado para los entusiastas del rally y el drift. Con su potente motor brushless, componentes metálicos duraderos y características modernas como iluminación LED y estabilización giroscópica, este vehículo es perfecto para emocionantes carreras en diversas superficies. Características principales: Réplica realista del Citroën C3 WRC Tracción 4WD para una óptima tracción Motor brushless 2845 3700KV potente Diferenciales metálicos y transmisión con rodamientos de bolas Amortiguadores de aluminio rellenos de aceite para una excelente suspensión Luces LED delanteras y traseras Sistema giroscópico integrado para drifts estables Incluye neumáticos de drift adicionales Contenido: Modelo RC Citroën C3 WRC listo para usar Sistema de radiocontrol 2,4 GHz Batería Li-Ion 7,4V 2000mAh Cargador Neumáticos de drift adicionales Protección contra el polvo Manual de usuario Accesorios necesarios: Dos pilas AA de 1,5V para el transmisor Especificaciones técnicas: Escala: 1:14 Tracción: 4WD Motor: Brushless 2845 3700KV Amortiguadores: Aluminio, rellenos de aceite Batería: Li-Ion 7,4V 2000mAh Radiocontrol: 2,4 GHz Tiempo de funcionamiento: Hasta 15 minutos Tiempo de carga: Aproximadamente 2 horas

Amewi Hyper GO Buggy brushless 3S 4WD 1:16 RTR blue The Hyper GO Buggy brushless 3S 4WD 1:16 RTR is a high-performance RC buggy that combines speed, precision, and fun in a compact format. Powered by a brushless motor, the buggy reaches speeds of up to 62 km/h, offering excellent traction and control on various terrains with its 4WD drivetrain. Main Features: Top Speed: Up to 62 km/h Drive: 4WD for optimal traction Motor: Brushless system for maximum performance Controller: 2.4 GHz interference-free Body: Durable and aerodynamic design in blue Technical Specifications: Scale: 1:16 Battery: 3S Li-Ion (included) Runtime: Up to 20 minutes Charging time: Approx. 120 minutes Recommended age: 14+

Push the throttle hard off-road and still never lose control - the Hyper Go monster truck in 1:16 scale accelerates up to 45 km/h with its 2845 brushless racing motor and ensures precise handling with regulation options. These include two adjustable top speed settings, a fast steering servo for agile direction changes, adjustable aluminium oil-pressure shock absorbers, adjustable suspension and an adjustable wheelie bar. Metal CVD drive shafts, metal propshaft and 45A brushless controller incl. active fan round off the equipment.The entire electronics are protected against splash water and allow unrestricted outdoor use. The large high-grip tyres made of soft rubber ensure full grip on any surface. In addition, the model is equipped with a bright switchable LED light for great action even in the dark. The handy 3-channel remote control transmits all functions without interference and also allows the operation of several models in parallel thanks to the 2.4 GHz system. The model is available as an RTR (Ready-to-Run) package, which means that all components - except for household batteries for the remote control - are already included.HIGHLIGHTS:Adjustable chassis: For more directional stability on the front axleMetal cardan shaft: For wear-free drive to the metal differentialsMetal CVD drive shafts: For direct drive to the wheelsOTHER FEATURES:2S LiPo power with 7.4V, 25C and 1050mAh in a hardcase battery specially developed for the seriesProfessional brushless racing motor for high speeds of up to approx. 45km/hFast steering servo for agile directional changes on any surfaceRobust body with internal body frame for high strengthComposite chassis for good durabilityPartial aluminium shock absorbersMetal propshaftFull ball bearingsHigh ground clearance (approx. 40mm)Bonnet with body clips and rubber tabs for safe removalBright switchable LED lighting fittedAdjustable wheelie bar includedTECHNICAL DATA:Scale: 1:16Length: 310mmWidth: 225mmHeight: 125mmWeight: 1048g incl. batteryWheelbase: 175mmTrack width front: 215mmTrack width rear: 215mmGround clearance: approx. 40mmFront wheels: outer diameter/width 80/45mmRear wheels: outside diameter/width 80/45mm Rim diameter: 50mmGearbox: MetalFront shock absorber: 60mmRear damper: 60mmBrake: ElectronicESC: Brushless 45AMotor: 2845 BrushlessDrive system: Cardan metalSteering servo: MiniMain material: Composite plasticBattery compartment dimensions: 110x35x24mmBattery: LiPo 2S 7.4V 1050mAh, 25C, Hardcase, Deans connector / T-Plug, 78x34x29mm, 74gDrive time: up to 12minTop speed: up to 45km/hRemote control: 3-channel, 2,4GHzRange: approx. 100mCharger: USB-Balancer charger with 7,4V 1,5A output powerSCOPE OF DELIVERY:VehicleRemote controlBatteryUSB charging cableWheelie barScrew setToolsInstruction manual DE/ENREQUIRED ACCESSORIES:2x AA Mignon batteries for the remote control

AMXRacing 1151MG Mini Digital Servo 3,6Kg wasserdichtArbeitsfrequenz:1000-2000 = 90°Arbeitsfrequenz: 500-2500 = 180°Motor: CoreGeschwindigkeit (4,8V): 0,12sec/60°Geschwindigkeit (6,0V): 0,1sec/60°Stellkraft(4,8V): 3,1kg/cmStellkraft (6,0V): 3,6kg/cmAbmessungen: 23,2 x 12,5 x 25,6mmGewicht: 15gAnschlusskabel Länge: 310mmKugellager: KeineGetriebe: MetallGehäuse: KunststoffAlternative zu Traxxas #2065

Team Corally SSX-125 7075 Edition 1/12 Pan Car Kit7075-Aluminium-Chassis – ultraleicht und extrem stabil1/12 Wettbewerbs-Pancar-Kit für höchste Renn-PerformancePräzisionskomponenten mit optimierter AufhängungsgeometrieSehr niedriges Schwerpunktdesign für maximale KurvenstabilitätKit-Version ohne Elektronik – freie Wahl bei Motor, Servo und Regler

Team Corally SSX-125 Carbon Edition 1/12 Pan Car KitCarbon-Chassis – extrem leicht und dennoch hochstabil1/12 Wettbewerbs-Pancar-Kit für maximale PerformanceOptimierte Fahrwerksgeometrie für präzises LenkverhaltenNiedriger Schwerpunkt für beste KurvenlageKit-Version ohne Elektronik – individuelle Konfiguration möglich

Rendimiento de competición con ingeniería belgaEl Team Corally SBX-425 es un buggy de competición 1:10 4WD diseñado para corredores exigentes que buscan precisión, durabilidad y versatilidad en pista. Desarrollado en Bélgica y optimizado por pilotos profesionales, este kit ofrece un chasis de aluminio 7075 T6, suspensión ajustable y componentes de alta gama para dominar cualquier circuito.Características destacadasChasis de aluminio 7075 T6 anodizado de 2.5 mm para máxima rigidez y respuesta.Suspensión optimizada con geometría ajustable y componentes de compuesto personalizado para flexibilidad y durabilidad.Amortiguadores Big Bore de aluminio anodizado con tapas de purga para una absorción eficiente.Diferenciales metálicos delanteros y traseros con engranajes de acero para una transmisión robusta.Montaje de servo flotante que elimina torsiones no deseadas del chasis.Torres de amortiguación de grafito de 4 mm con múltiples posiciones de montaje.Transmisión 4WD por eje con cardanes CVD de acero de alta calidad.Embrague central deslizante ajustable y de fácil acceso.Compatibilidad con baterías LiPo 2S Shorty gracias a una bandeja de batería de 47.5×95.5 mm.Especificaciones técnicasEscala: 1:10Tracción: 4WD por ejeLongitud: 410 mmAltura: 158 mmDistancia entre ejes: 287 mmVía delantera: 248 mmVía trasera: 244 mmDespeje al suelo: 40 mmPeso sin electrónica: 900 gDiámetro de amortiguadores: 14 mmLongitud amortiguador delantero: 78.5 mmLongitud amortiguador trasero: 90 mmAdaptadores de rueda: Hexágono de 12 mmRelación interna de transmisión: 2.5:1Contenido del kitChasis de competición sin montarCarrocería de policarbonato transparente precortada con máscaras y hoja de calcomaníasAlerón de policarbonatoLlantas delanteras y traseras (sin neumáticos)Manual de instrucciones detalladoHoja de configuraciónRequisitos para completarMotor brushless 1/10 de 17.5T a 5.5TESC brushless 1/10Servo de direcciónSistema de radio (transmisor y receptor)Batería LiPo 2S ShortyNeumáticosAceite de silicona para diferenciales y amortiguadoresGrasasPintura para la carroceríaHerramientas para el montaje

Team Corally SBX-825 7075 Edition 1/8 Racing Buggy KitRobuster 7075-Aluminium-Chassisrahmen für maximale Stabilität und Steifigkeit1/8 Wettbewerbs-Buggy-Bausatz – präzise Komponenten für ambitionierte FahrerVerstärkte Querlenker und Heavy-Duty-Aufhängung für höchste Belastungen auf der RennstreckeOptimierte Geometrie für exzellentes Kurvenverhalten und SprungkontrolleKomplettes Kit zum Eigenaufbau – ermöglicht individuelle Motor- und Elektronik-Konfiguration