Slash 4x4 LCG Tuning

Alternative zu Traxxas #5469Alternative zu Traxxas #5462

SPECIFICATIONS:Hex size: 12mm Thickness: 0.24" (6mm)

alternative Traxxas #5853X

Offset from stock wheel hex is +16mm/side.Alternative to the original part number from Traxxas #8227

- For six cell power Aluminum Outer Diff Case is a must; Revo and T-Maxx use RVO11L06, Summit use SUM11LH- Not intended for on road operation if the differential is replaced with a spool or lockerAlternative zu Traxxas #5379X

Replace Traxxas Big Bore Long Shock TRA2660, 3760, 3760Alength: 95mm (4") (not compressed)Mounting point 90mm (3 5/8")diameter: 19mm (3/4")Steel Shock Shaft 3.5mmSping 1.54mm wireDual rate 10TurnAccept optional Shock boot if need.Can be use withSLF48FS261SLF48MR268SLF48RS286

8mm ((M5 Lock Nut) Socket hex For the Revo T-Maxx Wheel7mm (M4 Lock Nut) Socket hex For 1/10 Wheel and 2wd Slipper4mm turnbuckle wrench for most 2WD Traxxas stock turnbuckle5mm turnbuckle wrench for most 4WD Traxxas stock turnbuckle

Alternative zu Traxxas #6823

Shield: rubber seal on both sides, color can be different.Example illustration

Inhalt: 21 KugellagerEs sind die Kugellager für die Lenkhebel, Radträger, Differentiale, Slipper und Lenkung enthalten.Übersicht:7 Stück - Kugellager 5x11x4mm5 Stück - Kugellager 10x15x4mm2 Stück - Kugellager 8x16x5mm2 Stück - Kugellager 6x12x4mm4 Stück - Kugellager 5x8x2,5mm1 Stück - Kugellager 12x18x4mmBeispielabbildung!

Inhalt: 20 KugellagerBeispielabbildung!

Alternative zu Traxxas #7426

Set beinhaltet:2 Stk. 3,5x32,5mm Spurstange2 Stk. 3x30,5mm Spurstange4 Stk. 3x31,5mm Spurstange10 Stk. C-Clips

Ersatzlüfter für Traxxas TXR3340 und die PHBPH3000 Lüfter.Alternative zu Traxxas #3340

Alternative zu Traxxas #6838

Alternative zu Traxxas #6839

Der RPM Slash Ersatzrad-Halter passt bei allen Traxxas Slash 2WD und Slash 4x4 Modellen in Verbindung mit dem RPM Heckrammern (Slash 4×4 – #RPM-80122, #RPM-80123 & #RPM-80125 und Slash 2WD – #RPM-81002, #RPM-81003 and #RPM-81005).

Alternative zu Traxxas #7423

alternative Traxxas #7423

RPM "No Clip" Body Mounts will not work with the Traxxas On Board Audio System (OBA). RPM Body Mounts are designed for use with most stock Traxxas Short Course Bodies, although they will not work with Ford Raptor bodies (#5815, #5815A, #5815R, #5815X, #5826, #5826A, #5826R & #5826X), Rob MacCachren Dodge body (#6833) or the Dakar body (#58044, #5818, #5818A or #5820A). This system has not been tested with any aftermarket bodies and is only guaranteed to fit the stock Traxxas part numbers below or any bodies based off of the #5811 & #6811 body styles. The following stock Traxxas part numbers represent a partial list of compatible bodies:No Number Plate Bodies: 5811, 5811X, 5816, 5817, 5819 & 5825.Number Plate Bodies: 6811, 6811X, 6817, 6818, 6820, 6821, 6825, 6825X, 6826, 6826R, 6831, 6849 & 6889.

Alternative zu Traxxas #7430

Alternative zu Traxxas #7430

Alternative zu Traxxas #6815.

The RPM Single Tire Spare Tire Carrier fits the Traxxas Slash 2wd & Slash 4×4 when used in conjunction with an RPM rear bumper (Slash 4×4 – #80122, #80123 & #80125 or Slash 2wd – #81002, #81003 and #81005). The RPM Spare Tire Carrier will not work with stock or any other aftermarket rear bumpers. One wheel and one tire in the 2.2"/3.0" size (not included) must be installed in order to satisfy the RPM warranty program. The only wheels with the correct offsets that will work with the RPM Spare Tire Carrier are stock offset Traxxas Slash 4×4 (front or rear), Slash 2wd (rear) or RPM #82332 – black or #82333 – chrome Revolver wheels. Tires must be 2.2"/3.0", short course specific (not included). Body modification is required to allow the Spare Tire Carrier to fit correctly.