Summit

Alternative zu Traxxas #5345R

Alternative zu Traxxas #5315

Alternative zu Traxxas #5660

Alternative zu Traxxas #5358

Alternative zu Traxxas #5358

Alternative zu Traxxas #5317

Alternative zu Traxxas #5337

Alternative zu Traxxas #5469Alternative zu Traxxas #5462

This is Gunmetal color, 7.5 turn, 50mm long, 2.3 mm wire, preload lift springs 19 LB/in Traxxas Nitro Revo Truck, Hot Racing cold-coiled springs are designed to support your Traxxas Revo with a little extra lift. These springs will help raise your truck after adding heavy duty upgrades. Adding these springs will add 5 to 10 percent more ground clearance to your Traxxas REVO.

This is Shiny blue color, 8 turn, 50mm long, 2.3 mm wire, preload lift springs 18 LB/in Traxxas Nitro Revo Truck,Hot Racing cold-coiled springs are designed to support your Traxxas Revo with a little extra lift. These springs will help raise your truck after adding heavy duty upgrades. Adding these springs will add 5 to 10 percent more ground clearance to your Traxxas REVO.FEATURES:These springs are 5mm longer than the stock Traxxas Revo springs this will change the preload position of spring adjuster to the top, and provides the Revo GTS shock a wider range of suspension adjustment.Spring Steel Plated chrome then powder coated with then with a distinctive chip-resistant Shiny blue color finishSPECIFICATIONS:Weight Rating 18 LB/in8 turn,50mm longINCLUDES:Two SpringsREQUIREMENTS:Assembly onto VehicleCOMMENTS:Coil springs can be either "hot-coiled" or "cold-coiled". Cold-coiled springs are more precise, Hot Racing cold coiled springs are wound from pre-heat treated spring wire stock. Many so call performance springs are cold-coiled from annealed "bundle stock" then quenched and tempered after coiling.This method produces a less accurate spring and can result in surface imperfections. After coiling, the closed ends are ground, Completed springs are inspected, powder-coated or plated then checked for dimensions, trueness and rate

- For six cell power Aluminum Outer Diff Case is a must; Revo and T-Maxx use RVO11L06, Summit use SUM11LH- Not intended for on road operation if the differential is replaced with a spool or lockerAlternative zu Traxxas #5379X

Alternative zu Traxxas #5351

This is a Graphit Slipper Clutch for the Traxxas Revo and T-Maxx.FEATURES:Up grade your stock slipper clutchesYOU WILL RECEIVE:(3) Pads

8mm ((M5 Lock Nut) Socket hex For the Revo T-Maxx Wheel7mm (M4 Lock Nut) Socket hex For 1/10 Wheel and 2wd Slipper4mm turnbuckle wrench for most 2WD Traxxas stock turnbuckle5mm turnbuckle wrench for most 4WD Traxxas stock turnbuckle

Alternative zu Traxxas #5669

inklusive Sticker SetMaterial: Kunststoff

links und rechts inklusive MontagematerialMaterial: Kunststoff

Hardtop Dach für Ladefläche mit Heckklappe 1:10 MonsterMaterial: Kunststoff

Material: Kunststoff

Proline 3,8" Felgen mit wechselbaren Mitnehmern.Tauschen Sie bei Bedarf einfach nur den Mitnehmer aus um die Felgen mit oder ohne Offset zu montieren, oder einen defekten Mitnehmer zu ersetzen.

Komplett höhenverstellbare Karosseriehalter für den Traxxas Revo/Summit/Slayer. Die Karosserie wird nicht wie üblich mit einem Splint fixiert sondern verschraubt.Alternative zu Traxxas #5314