Summit Tuning

Alternative zu Traxxas #5345R

Alternative zu Traxxas #5315

Alternative zu Traxxas #5660

Alternative zu Traxxas #5358

Alternative zu Traxxas #5358

Alternative zu Traxxas #5317

Alternative zu Traxxas #5337

Alternative zu Traxxas #5469Alternative zu Traxxas #5462

This is Gunmetal color, 7.5 turn, 50mm long, 2.3 mm wire, preload lift springs 19 LB/in Traxxas Nitro Revo Truck, Hot Racing cold-coiled springs are designed to support your Traxxas Revo with a little extra lift. These springs will help raise your truck after adding heavy duty upgrades. Adding these springs will add 5 to 10 percent more ground clearance to your Traxxas REVO.

This is Shiny blue color, 8 turn, 50mm long, 2.3 mm wire, preload lift springs 18 LB/in Traxxas Nitro Revo Truck,Hot Racing cold-coiled springs are designed to support your Traxxas Revo with a little extra lift. These springs will help raise your truck after adding heavy duty upgrades. Adding these springs will add 5 to 10 percent more ground clearance to your Traxxas REVO.FEATURES:These springs are 5mm longer than the stock Traxxas Revo springs this will change the preload position of spring adjuster to the top, and provides the Revo GTS shock a wider range of suspension adjustment.Spring Steel Plated chrome then powder coated with then with a distinctive chip-resistant Shiny blue color finishSPECIFICATIONS:Weight Rating 18 LB/in8 turn,50mm longINCLUDES:Two SpringsREQUIREMENTS:Assembly onto VehicleCOMMENTS:Coil springs can be either "hot-coiled" or "cold-coiled". Cold-coiled springs are more precise, Hot Racing cold coiled springs are wound from pre-heat treated spring wire stock. Many so call performance springs are cold-coiled from annealed "bundle stock" then quenched and tempered after coiling.This method produces a less accurate spring and can result in surface imperfections. After coiling, the closed ends are ground, Completed springs are inspected, powder-coated or plated then checked for dimensions, trueness and rate

- For six cell power Aluminum Outer Diff Case is a must; Revo and T-Maxx use RVO11L06, Summit use SUM11LH- Not intended for on road operation if the differential is replaced with a spool or lockerAlternative zu Traxxas #5379X

Alternative zu Traxxas #5351

This is a Graphit Slipper Clutch for the Traxxas Revo and T-Maxx.FEATURES:Up grade your stock slipper clutchesYOU WILL RECEIVE:(3) Pads

8mm ((M5 Lock Nut) Socket hex For the Revo T-Maxx Wheel7mm (M4 Lock Nut) Socket hex For 1/10 Wheel and 2wd Slipper4mm turnbuckle wrench for most 2WD Traxxas stock turnbuckle5mm turnbuckle wrench for most 4WD Traxxas stock turnbuckle

Alternative zu Traxxas #5669

Komplett höhenverstellbare Karosseriehalter für den Traxxas Revo/Summit/Slayer. Die Karosserie wird nicht wie üblich mit einem Splint fixiert sondern verschraubt.Alternative zu Traxxas #5314

Tech Notes: RPM Extended Rear A-arms are replacements for Traxxas stock #5333R. 6mm bumper mount spacers (not included) and M3 x 16mm screws (not included) may be necessary if installing these in place of standard wheelbase a-arms. Please review the installation instructions via "Downloads" at RPM for technical information regarding the installation of these a-arms.Alternative zu Traxxas #5333R

Tech Notes: RPM Extended Rear A-arms are replacements for Traxxas stock #5333R. 6mm bumper mount spacers (not included) and M3 x 16mm screws (not included) may be necessary if installing these in place of standard wheelbase a-arms. Please review the installation instructions via "Downloads" at RPM for technical information regarding the installation of these a-arms.Alternative zu Traxxas #5333R

Alternative zu Traxxas #5347

Alternative zu Traxxas #5347

Stahl-Hauptzahnrad mit RitzelAdapter wird in silber geliefert!Alternative zu Traxxas #3956

Stahl-Hauptzahnrad mit RitzelAdapter wird in silber geliefert!Alternative zu Traxxas #3956