Absima
Absima radio controlled models
1:24 Extrem Mini Racing Buggy 2WD RTR with ESP
FEATURES:- 2WD rear wheel drive- 2.4GHz remote control- Fully proportional control- Maximum speed can be limited on the remote control- Removable battery SPECIFICATION:- Servo: 3.7g Servo- Motor: 8520 Coreless Motor- Battery: 3.7V 300mAh LiPo Battery- Speed throttleable: Yes- ESP built in: Yes- Charging time: approx. 30-40 minutes- Driving time: approx. 20 minutes- Dimensions (L/W/H): 155x95x65 mm- Weight: 110 g INCLUDED:- 1:24 X-Racer Buggy RTR- 2.4GHz gRemote Control- 300mAh LiPo Battery- USB Charger- Manual REQUIRED ACCESSORIES:- 2 AA Batteries for Remote Control
1:10 EP Crawler CR3.4 SHERPA Grey RTR
UPDATE: September 2021! The new oil-filled shock absorbers with 3mm piston rods and external springs provide an even better and more realistic response. Tuning springs are also now available in soft and hard (sold separately).The door hinges for all Sherpa RTR bodies are no longer factory fitted, these are now included with the model as accessories. The illustrations show design examples.VEHICLE SPECS:Length: 542mmWidth: 250mmHeight: 240mmGround Clearance: 53mmWheelbase: 313mmWeight: 2970gApproach Angle: 60°Departure Angle: 45°Steering Angle: 45.8°Wheels: 12mm Hex Beadlock 1.9" 32x69mm Tires: 43x120mmShock Length: 90mmTransmission: 2-speed (Hi 1/15.1 / Lo 1/37.1), Remote shiftingGear Pitch: Module 0.8/32dp - Pinion 16T / Spur Gear 44TDrive System: 4WD Shaft Drive ELECTRONIC SPECS:ESC: 60A Brushed/Waterproof with T-plug connector (BEC 6V@3A, NiMh/LiPo suitable)Motor: 550 high-torque brushed motor 21TSteering Servo: 9kg MG, digital and waterproof Mini Servos: 0,9kg, waterproofRadio System: 6-channel 2.4GHz radio system (4.8 - 12.0V LiPo suitable) INCLUDES:Absima CR3.4 SHERPA RTR Model6-channel 2.4GHz Radio SystemSticker SheetManual (DE/ENG/FR) RECOMMENDED ACCESSORIES:The CR3.4 Sherpa accepts a wide variety of LiPo batteries and NiMH batteriesA charger is required which is dependent on the type of car battery4x AA mignon cells are required for the radio.
1:10 EP Crawler CR3.4eco "BRONCO Style" blue RTR
1:10 EP Crawler CR3.4eco in BRONCO Style - Blue RTRThe Absima 1:10 EP Crawler CR3.4eco in BRONCO Style is a Ready-to-Run (RTR) model designed specifically for crawler enthusiasts. With its striking blue Bronco design, it stands out on any trail.Main Features:550 32T Brushed High Torque motor for powerful performanceHobbyWing 40A speed controller with adjustable settingsRobust 4WD drive system for optimal tractionDetailed body design in classic Bronco styleReady-to-Run: Fully assembled and ready for immediate useThis crawler offers an ideal combination of performance, design, and user-friendliness, perfect for both beginners and experienced drivers.
1:10 CR4.4 WOLF Crawler green RTR
The completely redesigned tub-like chassis offers many advantages! All electronic components are easily accessible, which is crucial given the amount of technology packed in! Thanks to the extremely low "LCG" chassis and matching gearbox, the center of gravity is lowered, which is particularly helpful for high-body concepts like our WOLF. The battery box is centrally located and can be perfectly adapted to all 2-3S LiPo and 6-7 cell NiMH batteries thanks to its Velcro fastening and adjustable holder. The 11-channel remote control is necessary to control all the technical features. The 3-in-1 ESC/receiver unit and the light unit are kept separate to provide the pilot with all options for future optimizations/tuning measures.MORE FEATURES:Portal axles front/rearLockable differentials front/rear (independently switchable via remote control)2-speed transmission (switchable via remote control)25kg "High Torque" steering servo with metal gearsOil-filled aluminum shocksFully functional LED vehicle lighting11-channel 2.4GHz remote control systemUltra-grippy 2.2" competition tires550-size 32T brushed motorAll gears made of steel, main gear made of plasticFully ball bearing equippedSteel U-joints on the front axleDrag brake adjustable via remote controlRealistically designed interior1.2mm polycarbonate body with clear windowsNormal and competition driving modes adjustable via remote controlLiPo and NiMH mode adjustable via remote controlAdjustable battery boxTECH SPECS: 11-channel 2.4GHz remote control; Power supply: 2S LiPo / 4 * AA (Mignon); Low voltage warning: AA <4.2V / LiPo <7.0V11-channel 2.4GHz receiver; BEC: 6V/5A; 2-3S LiPo / NiMH 5-9 cells; Max current: 60A/240A; IPX7 waterproof rating; T-Plug connector6-channel light unit; IPX4 splash-proof550-size 32T brushed electric motor25kg metal gear steering servo; 25T splineMini servos 17g/0.9kg for 2-speed transmission and differentials9kg servo for "Tank Mode"Dimensions (L/W/H): 560*245*270mm Weight: 3480g Scope of delivery:-1:10 WOLF Crawler-2.4GHz remote control-"Heavy Duty" bumper-Sticker sheet-User manuals Required accessories: -2/3S LiPo or 7.2V/8.4V NiMH race pack-Suitable charger for the vehicle battery-4 * AA (Mignon) batteries for the remote control
1:10 CR4.4 WOLF Crawler anthrazit RTR
The completely redesigned tub-like chassis offers many advantages! All electronic components are easily accessible, which is crucial given the amount of technology packed in! Thanks to the extremely low "LCG" chassis and matching gearbox, the center of gravity is lowered, which is particularly helpful for high-body concepts like our WOLF. The battery box is centrally located and can be perfectly adapted to all 2-3S LiPo and 6-7 cell NiMH batteries thanks to its Velcro fastening and adjustable holder. The 11-channel remote control is necessary to control all the technical features. The 3-in-1 ESC/receiver unit and the light unit are kept separate to provide the pilot with all options for future optimizations/tuning measures.MORE FEATURES:Portal axles front/rearLockable differentials front/rear (independently switchable via remote control)2-speed transmission (switchable via remote control)25kg "High Torque" steering servo with metal gearsOil-filled aluminum shocksFully functional LED vehicle lighting11-channel 2.4GHz remote control systemUltra-grippy 2.2" competition tires550-size 32T brushed motorAll gears made of steel, main gear made of plasticFully ball bearing equippedSteel U-joints on the front axleDrag brake adjustable via remote controlRealistically designed interior1.2mm polycarbonate body with clear windowsNormal and competition driving modes adjustable via remote controlLiPo and NiMH mode adjustable via remote controlAdjustable battery boxTECH SPECS: 11-channel 2.4GHz remote control; Power supply: 2S LiPo / 4 * AA (Mignon); Low voltage warning: AA <4.2V / LiPo <7.0V11-channel 2.4GHz receiver; BEC: 6V/5A; 2-3S LiPo / NiMH 5-9 cells; Max current: 60A/240A; IPX7 waterproof rating; T-Plug connector6-channel light unit; IPX4 splash-proof550-size 32T brushed electric motor25kg metal gear steering servo; 25T splineMini servos 17g/0.9kg for 2-speed transmission and differentials9kg servo for "Tank Mode"Dimensions (L/W/H): 560*245*270mm Weight: 3480g Scope of delivery:-1:10 WOLF Crawler-2.4GHz remote control-"Heavy Duty" bumper-Sticker sheet-User manuals Required accessories: -2/3S LiPo or 7.2V/8.4V NiMH race pack-Suitable charger for the vehicle battery-4 * AA (Mignon) batteries for the remote control
1:10 CR4.4 WOLF Crawler yellow RTR
The completely redesigned tub-like chassis offers many advantages! All electronic components are easily accessible, which is crucial given the amount of technology packed in! Thanks to the extremely low "LCG" chassis and matching gearbox, the center of gravity is lowered, which is particularly helpful for high-body concepts like our WOLF. The battery box is centrally located and can be perfectly adapted to all 2-3S LiPo and 6-7 cell NiMH batteries thanks to its Velcro fastening and adjustable holder. The 11-channel remote control is necessary to control all the technical features. The 3-in-1 ESC/receiver unit and the light unit are kept separate to provide the pilot with all options for future optimizations/tuning measures.MORE FEATURES:Portal axles front/rearLockable differentials front/rear (independently switchable via remote control)2-speed transmission (switchable via remote control)25kg "High Torque" steering servo with metal gearsOil-filled aluminum shocksFully functional LED vehicle lighting11-channel 2.4GHz remote control systemUltra-grippy 2.2" competition tires550-size 32T brushed motorAll gears made of steel, main gear made of plasticFully ball bearing equippedSteel U-joints on the front axleDrag brake adjustable via remote controlRealistically designed interior1.2mm polycarbonate body with clear windowsNormal and competition driving modes adjustable via remote controlLiPo and NiMH mode adjustable via remote controlAdjustable battery boxTECH SPECS: 11-channel 2.4GHz remote control; Power supply: 2S LiPo / 4 * AA (Mignon); Low voltage warning: AA <4.2V / LiPo <7.0V11-channel 2.4GHz receiver; BEC: 6V/5A; 2-3S LiPo / NiMH 5-9 cells; Max current: 60A/240A; IPX7 waterproof rating; T-Plug connector6-channel light unit; IPX4 splash-proof550-size 32T brushed electric motor25kg metal gear steering servo; 25T splineMini servos 17g/0.9kg for 2-speed transmission and differentials9kg servo for "Tank Mode"Dimensions (L/W/H): 560*245*270mm Weight: 3480g Scope of delivery:-1:10 WOLF Crawler-2.4GHz remote control-"Heavy Duty" bumper-Sticker sheet-User manuals Required accessories: -2/3S LiPo or 7.2V/8.4V NiMH race pack-Suitable charger for the vehicle battery-4 * AA (Mignon) batteries for the remote control
1:10 CR4.4 WOLF Crawler blue RTR
The completely redesigned tub-like chassis offers many advantages! All electronic components are easily accessible, which is crucial given the amount of technology packed in! Thanks to the extremely low "LCG" chassis and matching gearbox, the center of gravity is lowered, which is particularly helpful for high-body concepts like our WOLF. The battery box is centrally located and can be perfectly adapted to all 2-3S LiPo and 6-7 cell NiMH batteries thanks to its Velcro fastening and adjustable holder. The 11-channel remote control is necessary to control all the technical features. The 3-in-1 ESC/receiver unit and the light unit are kept separate to provide the pilot with all options for future optimizations/tuning measures.MORE FEATURES:Portal axles front/rearLockable differentials front/rear (independently switchable via remote control)2-speed transmission (switchable via remote control)25kg "High Torque" steering servo with metal gearsOil-filled aluminum shocksFully functional LED vehicle lighting11-channel 2.4GHz remote control systemUltra-grippy 2.2" competition tires550-size 32T brushed motorAll gears made of steel, main gear made of plasticFully ball bearing equippedSteel U-joints on the front axleDrag brake adjustable via remote controlRealistically designed interior1.2mm polycarbonate body with clear windowsNormal and competition driving modes adjustable via remote controlLiPo and NiMH mode adjustable via remote controlAdjustable battery boxTECH SPECS: 11-channel 2.4GHz remote control; Power supply: 2S LiPo / 4 * AA (Mignon); Low voltage warning: AA <4.2V / LiPo <7.0V11-channel 2.4GHz receiver; BEC: 6V/5A; 2-3S LiPo / NiMH 5-9 cells; Max current: 60A/240A; IPX7 waterproof rating; T-Plug connector6-channel light unit; IPX4 splash-proof550-size 32T brushed electric motor25kg metal gear steering servo; 25T splineMini servos 17g/0.9kg for 2-speed transmission and differentials9kg servo for "Tank Mode"Dimensions (L/W/H): 560*245*270mm Weight: 3480g Scope of delivery:-1:10 WOLF Crawler-2.4GHz remote control-"Heavy Duty" bumper-Sticker sheet-User manuals Required accessories: -2/3S LiPo or 7.2V/8.4V NiMH race pack-Suitable charger for the vehicle battery-4 * AA (Mignon) batteries for the remote control
Absima CR4.4 Patrol Light Blue 1:10 Crawler RTR
Absima CR4.4 Patrol Light Blue 1:10 Crawler RTR – High-End Crawler with Innovative FeaturesThe Absima CR4.4 Patrol in light blue is a powerful 1:10 crawler featuring a newly developed Low Center of Gravity (LCG) chassis for maximum traction and stability. Its innovative Trail Turn function locks a single rear wheel, allowing for tighter turning circles and improved maneuverability on challenging terrain.Main Features:LCG Chassis: Flat design for a low center of gravity and optimal traction.Trail Turn Function: Patented system for tight turns by locking one rear wheel.2-Speed Transmission: Switchable via transmitter for different speeds.Lockable Differentials: Independently controllable front and rear diffs via transmitter.Fully Functional LED Lighting: Switchable via transmitter for a realistic look.Technical Specifications:Scale: 1:10Wheelbase: 325 mmTrack Width: 267 mmGround Clearance: 65 mmDimensions (L/W/H): 521 x 247 x 267 mmWeight (without battery): 3100 gMotor: 550 32T BrushedESC: WP-1060 Hobbywing (waterproof)Steering Servo: 25 kg High-Torque Digital Servo with metal gearsTires: 2.2” Competition tiresScope of Delivery:1:10 PATROL Crawler2.4GHz 10-Channel TransmitterSticker SheetUser ManualRequired Accessories:2/3S LiPo or 7.2V/8.4V NiMH BatterySuitable Charger4x AA Mignon or 2S TX LiPo Batteries for the TransmitterThe Absima CR4.4 Patrol is the ideal crawler for demanding RC enthusiasts who value technology, design, and performance.
Absima CR4.4 Patrol Dark Blue 1:10 Crawler RTR
Absima CR4.4 Patrol Dark Blue 1:10 Crawler RTR – High-End Crawler with Innovative FeaturesThe Absima CR4.4 Patrol in dark blue is a powerful 1:10 crawler featuring a newly developed Low Center of Gravity (LCG) chassis for maximum traction and stability. Its innovative Trail Turn function locks a single rear wheel, allowing for tighter turning circles and improved maneuverability on challenging terrain.Main Features:LCG Chassis: Flat design for a low center of gravity and optimal traction.Trail Turn Function: Patented system for tight turns by locking one rear wheel.2-Speed Transmission: Switchable via transmitter for different speeds.Lockable Differentials: Independently controllable front and rear diffs via transmitter.Fully Functional LED Lighting: Switchable via transmitter for a realistic look.Technical Specifications:Scale: 1:10Wheelbase: 325 mmTrack Width: 267 mmGround Clearance: 65 mmDimensions (L/W/H): 521 x 247 x 267 mmWeight (without battery): 3100 gMotor: 550 32T BrushedESC: WP-1060 Hobbywing (waterproof)Steering Servo: 25 kg High-Torque Digital Servo with metal gearsTires: 2.2” Competition tiresScope of Delivery:1:10 PATROL Crawler2.4GHz 10-Channel TransmitterSticker SheetUser ManualRequired Accessories:2/3S LiPo or 7.2V/8.4V NiMH BatterySuitable Charger4x AA Mignon or 2S TX LiPo Batteries for the TransmitterThe Absima CR4.4 Patrol is the ideal crawler for demanding RC enthusiasts who value technology, design, and performance.
Absima CR4.4 Patrol cream 1:10 Crawler RTR
Absima CR4.4 Patrol cream 1:10 Crawler RTR – Innovative High-End Crawler for Challenging TerrainThe Absima CR4.4 Patrol in cream is a premium 1:10 crawler featuring a newly developed Low Center of Gravity (LCG) chassis. This design ensures maximum traction and stability, especially on steep inclines and extreme side angles. The innovative Trail Turn function allows for tighter turning circles by selectively locking a rear wheel, significantly enhancing maneuverability in difficult terrain.Main Features:LCG Chassis: Flat design for a low center of gravity and optimal traction.Trail Turn Function: Patented system for tight turns by locking one rear wheel.2-Speed Transmission: Switchable via transmitter for different speeds.Lockable Differentials: Independently controllable front and rear diffs via transmitter.Fully Functional LED Lighting: Switchable via transmitter for a realistic look.Technical Specifications:Scale: 1:10Wheelbase: 325 mmTrack Width: 267 mmGround Clearance: 65 mmDimensions (L/W/H): 521 x 247 x 267 mmWeight (without battery): 3100 gMotor: 550 32T BrushedESC: WP-1060 Hobbywing (waterproof)Steering Servo: 25 kg High-Torque Digital Servo with metal gearsTires: 2.2” Competition tiresScope of Delivery:1:10 PATROL Crawler2.4GHz 10-Channel TransmitterSticker SheetUser ManualRequired Accessories:2/3S LiPo or 7.2V/8.4V NiMH BatterySuitable Charger4x AA Mignon or 2S TX LiPo Batteries for the TransmitterThe Absima CR4.4 Patrol cream is the ideal crawler for demanding RC enthusiasts who value technology, design, and performance.
1:10 Touring/Rally Car ATC3.4V2 4WD RTR
Features:4WD all wheel drive2.4GHz 4-channel radio system80A brushed speed controller with T-plug540size 15T Motor mit 32.000 U/min @ 7.4V6kg steering servo (25T, ball bearing)4 oil shock absorberBall bearing main driveExtremely durable composite plastic parts Steel differential outdrives Aluminum universal joint drive with steel mountsAdjustable upper track rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish touring car bodyLight-Weight chassis (less weight - longer driving time)Many aluminum option parts availableTechnical Data: Scale: 1:10Dimensions (L/W/H): 470x200x150 mmWeight: 1400gWheelbase: 260mmGround clearance: ca. 15mmTrack width: 170mm front/rearOn-road wheels front/rear: Durchmesser: 65mm / Width: 26mmRally wheels front/rear: Durchmesser: 70mm / Width: 26mmShock-oil: 400CPSDamper installation length: 60mmInternal gear ratio: bevel gear: 13T / ring gear: 38T Motor ratio brushed version: Pinion: 26T / main gear: 58T (module 0.6) Contains: ATC3.4V2 On-Road/Rally Car RTR 2.4GHz CR4S radio systemPlastic clips for shock absorbersStickerManual You need:4x AA batteries for the radio system 7.2V NiMH or 7.4V* LiPo car battery (*recommended)Charger (suitable for car battery)Programming card for individual settings of the speed controller
1:10 EP Buggy AB3.4-V2 4WD RTR
4WD all wheel drive2.4 GHz 4-channel radio system80A brushed speed controller with T-plug540size 15T motor with 32.000RPM @ 7.4V6kg steering servo (25T, ball bearings)Oil shock absimrbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminum main drive shaft with steel mountsAdjustable upper tie rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish "Cap Forward" buggy body"Light-Weight" chassis (less weight - longer drive time)Many aluminum option parts available Scale: 1:10Dimensions (L/W/H): 380x255x155 mmWeight: 1400gWheelbase: 270mmGround clearance: ca. 30mmTrack width: 215mm front/rearFront wheels: Durchmesser: 88mm / Width: 33mmRear wheels: Durchmesser: 88mm / Width: 42mmShock absorber oil: 400CPSShock absorber installation length: 90mmMotor ratio: pinion: 23T / main gear: 64T (module 0,6) Scope of Delivery: 1/10 Buggy "AB3.4V2" RTR2.4GHz "CR4S" radioSticker sheetManual Required:4x AA Batteries for radio7.2V NiMH or 7.4V* LiPo car battery (*recommended)Charger (suitable for car battery)Programm card for individual settings of the speed controller
1:10 Race Truck - Truggy AT3.4v2 4WD RTR
The new 80A brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully utilise the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item no. 2110061) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 540 15T brushed motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. Thanks to the higher output of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - regardless of the C-rate and capacity. 4 oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun is guaranteed. A servo with 15kg actuating force and metal gearing handles the steering commands.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that settings can be made easily using levers and rotary knobs. In addition, the remote control has a "beginner mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have much experience in handling such RC vehicles.Highlights:4WD all-wheel drive2.4 GHz 4-channel radio system80A brushed speed controller with T-plug540 15T motor with 32,000 rpm @ 7.4V15kg steering servo with metal gears (25T, ball bearings)4 oil shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish truggy body with plastic add-on parts"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:Scale 1:10Dimensions (L/W/H): 405x325x165 mmWeight: 1740gWheelbase: 270mmGround clearance: approx. 35mmTrack width: 270mm front/rearWheels front/rear: Durchmesser: 105mm / width: 55mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmEngine gear ratio: Pinion: 18T / main gear: 64T (module 0.6) Scope of delivery:1/10 Truggy "AT3.4V2" RTR2.4GHz "CR4S" remote controlSticker sheetinstruction manualadditionally required:4x AA batteries for remote control7.2V NiMH or 7.4V* LiPo drive battery (*recommended)Charger (suitable for the drive battery)Programming card for individual settings of the speed controller
1:10 EP Truggy "AT3.4-V2 KIT" 4WD KIT
Powerful 1:10 EP Truggy AT3.4-V2 KIT 4WDThe Absima 1:10 EP Truggy "AT3.4-V2 KIT" is a high-quality, electric-powered truggy in 1:10 scale. This 4WD kit provides an excellent foundation for off-road enthusiasts who value performance and quality.Main Features:Robust 4WD drive system for optimal traction on various terrainsHigh-quality materials and precise craftsmanship for durabilityCustomizable components for individual settings and upgradesIdeal for competitions and recreational off-road drivingThe AT3.4-V2 KIT offers a solid foundation for those seeking a reliable and high-performance RC vehicle.
1:10 Touring Car ATC 3.4 BL 4WD Brushless RTR
UNBELIEVABLE POWER - the new Hotshot 3.4BL series is equipped with a powerful brushless electric motor and waterproof electronic speed controller (ESC). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.HIGHLIGHTS:Water-resistant 50A BL Speed Controler (programmable)Powerfull 3300KV BL Motor2.4GHz A.F.H.D.S. Radio SystemFull Aluminum ShocksSteel Motor TransmissionPRODUCT FEATURESTransmission: Forward, Brake & ReverseDrive System: 4 Wheel DriveBall bearing transmissionOil filled adjustable shocksGear differential front/rearAluminum motor mountComplete covered transmissionAdjustable turnbuckles & wishbonesAluminum drive shaftFull printed body2.4GHz radio System Sticker sheet for a unique designA lot tune-up parts available!TECHNICAL SPECIFICATION:Measure (L/W/H): 450x190x140 mmWeight: 1300gWheelbase: 260 mmChassis clearance: 20 mmTire width: 27 mm front / 27 mm rearTire Durchmesser: ± 65 mmShock spring force: medium / Length: 62mm f/rShock oil viscosity: 300 f/rSteel Motor transmission: Pinion 29T / Gear 64TPinion module: 0.6MORE FEATURES:BL Speed Controller (2110007): programmable (brake power, neutral brake, drive mode, punch, V cut-off) / NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 50A cont./300A peak / BEC 6V/3A / Overheat cut-off / Drive function: front/reverse/brake (standard) / Plug system: T-plug (Deans style)Servo (2030003): 4kg steering force / 25T outdrive Motor (2130005): 3421KV / 27.400RPM @ 7.4V / Operating voltage: 4.8 - 11.1V / Size: 540 Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimmingSCOPE OF DELIVERYTouring Car "ATC3.4BL" RTR - brushless version2.4GHz Radio SystemManualSticker SheetREQUIRED ACCESSORIES 2S LiPo Battery 7.4VCharger (LiPo suitable) 4x AA Mignon Batteries for Radio
1:10 Buggy AB3.4BLv2 4WD Brushless RTR
The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-plug. To fully utilise the potential of the vehicle, we recommend a 2S/7.4V LiPo battery for operation. In addition, a separately available programming box (item no. 2110062) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 6kg servo handles the steering commands. The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle enormously. Handling also becomes almost impossible due to the enormous over-motorisation. We therefore generally advise against 3S operation. 4 adjustable aluminium oil-pressure shock absorbers offer ideal handling, making driving a lot of fun. The spring preload can be adjusted using a knurled screw. This allows the suspension to be perfectly customised to your needs.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that the settings can be easily adjusted using levers Highlights:4WD all-wheel drive2.4 GHz 4-channel remote control system60A brushless speed controller (waterproof; T-plug; programmable)3421KV brushless motor (sensorless; splash-proof)6kg steering servo (25T, ball bearing)4 aluminium oil pressure shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outletsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish "Cap Forward" buggy bodywork"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:1:10 scaleDimensions (L/W/H): 380x255x155 mmWeight: 1530gWheelbase: 270mmGround clearance: approx. 30mmTrack width: 215mm front/rearFront wheels: Durchmesser: 88mm / width: 33mmRear wheels: Durchmesser: 88mm / width: 42mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmMotor gear ratio: pinion: 26T / main gear: 64T (module 0.6) Scope of delivery:1/10 Brushless Buggy "AB3.4BLV2" RTR2.4GHz "CR4S" remote controlSticker sheetOperating instructionsadditionally required:4x AA batteries for remote control7.4V/2S* LiPo drive battery (*recommended)Charger for LiPo batteriesProgramming box for individual settings on the speed controller
1:10 Race Truck - Truggy AT3.4BLv2 4WD Brushless RTR
The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-plug. To fully utilise the potential of the vehicle, we recommend a 2S/7.4V LiPo battery for operation. In addition, a separately available programming box (item no. 2110062) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 6kg servo handles the steering commands. The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle enormously. Handling also becomes almost impossible due to the enormous over-motorisation. We therefore generally advise against 3S operation. 4 adjustable aluminium oil-pressure shock absorbers offer ideal handling, making driving a lot of fun. The spring preload can be adjusted using a knurled screw. This allows the suspension to be perfectly customised to your needs.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that the settings can be easily adjusted using levers Highlights:4WD all-wheel drive2.4 GHz 4-channel remote control system60A brushless speed controller (waterproof; T-plug; programmable)3421KV brushless motor (sensorless; splash-proof)15kg steering servo with metal gears (25T, ball bearings)4 aluminium oil pressure shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outletsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish truggy body with plastic add-on parts"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:Scale 1:10Dimensions (L/W/H): 405x325x165 mmWeight: 1780gWheelbase: 270mmGround clearance: approx. 35mmTrack width: 270mm front/rearWheels front/rear: Durchmesser: 105mm / width: 55mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmEngine gear ratio: pinion: 23T / main gear: 64T (module 0.6) Scope of delivery:1/10 Brushless Truggy "AT3.4BLV2" RTR2.4GHz "CR4S" remote controlSticker sheetinstruction manualadditionally required:4x AA batteries for remote control7.4V/2S* LiPo drive battery (*recommended)Charger for LiPo batteriesProgramming box for individual settings on the speed controller
1:10 Monster Truck AMT3.4v2 4WD Brushless RTR
The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-plug. To fully utilise the potential of the vehicle, we recommend a 2S/7.4V LiPo battery for operation. In addition, a separately available programming box (item no. 2110062) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 6kg servo handles the steering commands. The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle enormously. Handling also becomes almost impossible due to the enormous over-motorisation. We therefore generally advise against 3S operation. 4 adjustable aluminium oil-pressure shock absorbers offer ideal handling, making driving a lot of fun. The spring preload can be adjusted using a knurled screw. This allows the suspension to be perfectly customised to your needs.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that the settings can be easily adjusted using leversHighlights:4WD all-wheel drive2.4 GHz 4-channel remote control system60A brushless speed controller (waterproof; T-plug; programmable)3421KV brushless motor (sensorless; splash-proof)15kg steering servo with metal gears (25T, ball bearings)8 aluminium oil pressure shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish monster truck body with plastic add-on parts"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:Scale 1:10Dimensions (L/W/H): 425x300x200 mmWeight: 2090gWheelbase: 270mmGround clearance: approx. 45mmTrack width: 250mm front/rearWheels front/rear: Durchmesser: 116mm / width: 57mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 100mmEngine gear ratio: Pinion: 21T / main gear: 64T (module 0.6) Scope of delivery:1/10 Brushless Monster Truck "AMT3.4V2BL" RTR2.4GHz "CR4S" remote controlSticker sheetinstruction manualadditionally required:4x AA batteries for remote control7.4V/2S* LiPo drive battery (*recommended)Charger for LiPo batteriesProgramming box for individual settings on the speed controller
1:8 Buggy STOKE V2 green 4S RTR
1:8 Buggy "STOKE V2" green 4S RTRThe 1:8 Buggy "STOKE V2" in green is a high-performance and robust RC vehicle designed for off-road adventures. With its 4WD drive and modern racing design, it offers agile handling and optimized performance.Main Features:Powerful Drive: Equipped with a 3668 brushless motor with 2300KV and a 120A speed controller, the buggy reaches speeds of up to 70 km/h in 4S LiPo operation.Robust Construction: Extremely durable composite plastic parts, a 3 mm aluminum chassis plate with ABSIMA laser engraving, and fully ball-bearing components ensure longevity and reliability.High-Quality Suspension: Adjustable 16 mm "Big Bore" aluminum shock absorbers provide excellent driving behavior on various terrains.Precise Steering: The 9 kg steering servo with metal gears and aluminum servo horn enables precise steering movements.Customizable Performance: The speed controller is programmable (programming box optionally available), allowing punch and braking force to be individually adjusted. Additionally, the remote control offers a "beginner mode" with 50% power limitation for novices.Technical Specifications:Scale: 1:8Drive Type: 4WD All-Wheel DriveWheelbase: 345 mmGround Clearance: 35 mmWheels: Ø 115 mm / Width 43 mmGear Ratio: Pinion 15T / Main Gear 49TDimensions (L/W/H): 550 x 310 x 180 mmWeight: 3150 g
1:14 EP Truggy POWER black/red 4WD RTR
Discover the RC model sport with the "First Step Performance" from Absima. Up to 36 KM/H and power to the max you will get with this awesome model. Of course you will be supported by real RC technique. A safe 2.4 GHz remote control system supports the electronic speed controller to release the power at your command. This RC buggy is made of high quality and strong material with capacity in anti-collision and beat resistance. With soft hollow rubber tires and professional shock absorbing system features great performance. Take the first step into the world of RC modelsport with this ready-to-run set!Enjoying real RC racing with the 1/14 4WD RC car, you can get started quickly and handle it like a pro. Competing with other advanced RC car lovers and enjoying the exciting racing on the street, in your backyard or in the woods!.HIGHLIGHTS:Water-resistant electronicIncl. car batteries and USB charging cable Speed up to 36 KM/HAll spare parts availableNice handling - perfect fro beginnersGENERAL CHASSIS FEATURES: 1/14th Scale4WDCompletely ball bearing mounted2.2kg Steering ServoFront & rear differentialsComplete covered transmission Gears made from extreme durable nylon materialPinion made from copper Independent suspension systemHigh performance 390 Motor and speed controllerFront CVD drive shafts Range aprox. 60mDrive time: aprox. 16 MinutesAluminum cardan shafts Adjustable speed via remote controlOverheat protection Incl. 2.4GHz radio systemNice detailed body designOvercharge & Over-discharge Protection 2x 3.7V 1500mAh Li-Ion Car Battery"Saddle Pack" battery layout for a perfect weight distribution TECHNICAL SPECIFICATION:Car size: (L/W/H): 292 x 210 x 126 mmWeight: 795g (w/o batteries)Wheelbase: 190 mmChassis Clearance: 35 mmTire Width: 40 mmWheel Durchmesser: : ± 80 mmShock Oil Viscosity : n.a.Shock Spring Force: MediumShock Instalation Length: 65 mm front/rearSCOPE OF DELIVERY: 1/14th RC Car 2.4 GHz Radio System 2x Li-Ion 3.7V 1500mAh Car BatteriesUSB Charging CableManualREQUIRED ACCESSORIES:3 AA Cells for Radio
1:14 EP Monster Truck RACING black/blue 4WD RTR
Discover the RC model sport with the "First Step Performance" from Absima. Up to 36 KM/H and power to the max you will get with this awesome model. Of course you will be supported by real RC technique. A safe 2.4 GHz remote control system supports the electronic speed controller to release the power at your command. This RC buggy is made of high quality and strong material with capacity in anti-collision and beat resistance. With soft hollow rubber tires and professional shock absorbing system features great performance. Take the first step into the world of RC modelsport with this ready-to-run set!Enjoying real RC racing with the 1/14 4WD RC car, you can get started quickly and handle it like a pro. Competing with other advanced RC car lovers and enjoying the exciting racing on the street, in your backyard or in the woods!. HIGHLIGHTS:Water-resistant electronicIncl. car batteries and USB charging cable Speed up to 36 KM/HAll spare parts availableNice handling - perfect fro beginnersGENERAL CHASSIS FEATURES: 1/14th Scale4WDCompletely ball bearing mounted2.2kg Steering ServoFront & rear differentialsComplete covered transmission Gears made from extreme durable nylon materialPinion made from copper Independent suspension systemHigh performance 390 Motor and speed controllerFront CVD drive shafts Range aprox. 60mDrive time: aprox. 16 MinutesAluminum cardan shafts Adjustable speed via remote controlOverheat protection Incl. 2.4GHz radio systemNice detailed body designOvercharge & Over-discharge Protection 2x 3.7V 1500mAh Li-Ion Car Battery"Saddle Pack" battery layout for a perfect weight distributionIncluding a full-size spare wheelTECHNICAL SPECIFICATION:Car size: (L/W/H): 295 x 230 x 125 mmWeight: 845g (w/o batteries)Wheelbase: 190 mmChassis Clearance: 40 mmTire Width: 45 mmWheel Durchmesser: : ± 85 mmShock Oil Viscosity : n.a.Shock Spring Force: MediumShock Instalation Length: 65 mm front/rearSCOPE OF DELIVERY: 1/14th RC Car 2.4 GHz Radio System 2x Li-Ion 3.7V 1500mAh Car BatteriesUSB Charging CableManualREQUIRED ACCESSORIES:3 AA Cells for Radio
1:16 MINI AT green/gray RTR Battery/Charger
Highlights:Splash-proof Includes rechargeable battery and USB charging cable LED headlight included Original spare parts available Features:4WD all-wheel driveFully ball-bearing mounted2 differentials High-current plug (T-plug) High-performance motor and 40A speed controllerCVD drive shafts (front)Radio range approx. 60m Travel time with full battery: +/20 minutesAluminum gimbal driveAdjustable speed on the transmitterOverheating protectionLED front lighting included2.4 GHz remote control system includedBodywork with sticker sheet to design yourself Technical data:Dimensions (L/W/H): 270 x 215 x 125 mmWeight: 710 gWheelbase: 175 mmGround clearance: 45 mmTrack width: 175 mm front / 175 mm rearTires: Monster Rubber / 5 double-spoke rimWheels front/rear: 40 mm width / Durchmesser: ± 80 mmIncluded are: Mini AT Monster Truggy2.4 GHz remote control system7.4V Li-Ion battery 1500mAhUSB charging cableWheelie barAdditionally required:3x AA batteries for the remote control
Absima 1:16 BL/3S Monster Truck MINI AMT Magic-Purple RTR
Absima 1:16 BL/3S Monster Truck MINI AMT Magic-Purple RTR – Compact Brushless Monster Truck with 70 km/h Top SpeedThe Absima MINI AMT in 1:16 scale combines impressive performance with a robust design, ideal for RC enthusiasts seeking speed and control. Powered by a 3S LiPo battery, this monster truck reaches speeds of up to 70 km/h and offers excellent driving stability thanks to its CNC-machined aluminum chassis and hydraulic shock absorbers.Main Features:Brushless Motor: 2845 / 3600KV for high performance and efficiency.ESC: 35A, compatible with 3S LiPo (11.1V).Chassis: CNC-machined T6061 aluminum for maximum stability.Shock Absorbers: Aluminum oil-filled shocks (Ø16x71 mm) for optimal damping.Tires: All-terrain tires (Ø87x44 mm) for versatile off-road capability.LED Lighting: Yellow glowing front LEDs for a realistic look.Wheelie Bar: Included for spectacular wheelies.Technical Specifications:Scale: 1:16Top Speed: up to 70 km/hMotor: Brushless 2845 / 3600KVESC: 35A compatible with 3S LiPo (11.1V)Battery: 3S LiPo 2200mAh 35C (runtime approx. 20 minutes)Servo: 2.2 kg waterproof with metal gearsWheelbase: 195 mmDimensions (L/W/H): 320 x 229 x 140 mmWeight: 1.2 kgGround Clearance: 50 mmScope of Delivery:1x Absima MINI AMT Monster Truck Magic-Purple RTR1x 3S LiPo Battery 2200mAh1x 2.4GHz Remote Control1x USB Charger1x User ManualThe Absima MINI AMT offers excellent value for money and is the perfect entry into the world of RC monster trucks.
1:7 Rock Racer MAMBA 7 green 6S BL RTR
Programmable 150A Electronic Speed Controller (ESC) 4282size Brushless Motor with 2000KVAluminum Middle Differential CaseHardened steel drive components4mm "One-Piece" Aluminum Chassis PlateA multi-piece very detailed body available in neon-green or neon-orangeLED front headlights, taillights and light bar on the roofFully detailed interior with 2 figures, dashboard and control panelRoll cage, driver safety netsMulti-terrain wheels with beadlock-look and closed hubcaps Full size spare wheelOptional mountable wheelie bar Chassis and Drive Units:"One-Piece" 4mm aluminum chassis - anodized and with ABSIMA engraving "Tower-to-Tower” Aluminum braces for maximum durabilityCenter differential with sturdy aluminum housing Metal differential outdrives 5mm Steel drive shafts and CVD shafts at the front6mm CNC Aluminum shock towersAdjustable aluminum oil-filled shock absorbers Aluminum wheel hubs and steering armsAluminum steering braceAluminum wishbone bracket front and rearAluminum motor mount and center differential mountWishbones made of glass fiber reinforced material 5mm Threaded rods front and rear Completely ball bearing mounted drive train Extra-rugged front bumper and spare wheel holder Stabilizer set front and rear Elektronic components:The ABSIMA CR4S 4-channel remote control including R4WP-Micro receiver has a foam rubber steering wheel and a "beginner mode" which reduces the engine power to 50%. In addition, you have 2 more channels available to control, for example, the separately available mechanical handbrake. Fast and precise 25kg steering servo with metal gear. Big car, big motor! A 4282 brushless motor with 2000KV provide plenty of propulsion. This monster with 42mm diameter and 82mm length is cooled by two 30mm high-speed fans. The ESC with its 150A continuous current also has a fan which ensures a perfect operating temperature. The electronics are powered by either two 2S batteries or two 3S batteries with XT90 high current connectors which fit perfectly into the two battery compartments in the rear of the vehicle. Due to the well thought-out distribution of all components, an optimal weight distribution is guaranteed. Scale: 1/7Drivetrain: 4WDLength: 680mmWidth: 380mmHeight: 230mmWeight: 5,8kg (without batteries) Ground Clearance: 55mmWheelbase: 419mmTrack front/rear: 330mm/320mm Chassis: One-Piece 4mm Aluminum Chassis Plate Suspension: Independent Shock Absober (front): 110mm, oil-filled Shock Absorber (rear): 130mm, oil-filled Wheels: 165x63mm, All-TerrainRims: ø90mm; Beadlock-look Ball Bearing: Complete ball bearing drive train Motor Type: Brushless, SensorlessMotor Power: 2000KVMotor Size: 4282 (ø42mm x Length 82mm) Motor Cooling: 2* High-Speed Fans mounted on a Aluminum Heatsink Pinion: 13T, Modul 1.0Spur Gear: 50TFinal Drive Ratio: 15.1 Electronic Speed Controller: 150A ESC with XT90 Plugs and Cooling Fan Load: 150A Continuous / 720A PeakBEC: 6.1V or 7.4V / 3A (Switch Mode)ESC programmable: YES (with optional program box) Drive System: 5mm CVD Shafts (front) and 5mm Metal Cardan Shafts Battery Compartments: 4,9 x 15,5 cmOperation with: 2* 2S/7.4V LiPo Batteries or 2* 3S/11.1V LiPoBatteries High Speed: +/-100 km/h (with 2x 3S LiPo batteries) Radio: "CR4S" 4-Channel 2.4GHz Steering Servo: 25kg, Metal Gearadditional needed:Lipo Batteries with XT90Lipo ChargerBatteries 4x Radio