Hyper Go Models, Spare Parts & Accessories Overview

The next addition to our popular Hyper Go series: the Breaker ProDrift-1.4 with top-of-the-range equipment in 1:14 scale. Performance, body and driving characteristics set new standards in the vehicle category of this size. A 2845 3700KV brushless motor is available as the drive, which distributes its power to all four wheels via solid metal drive shafts. The built-in CVD shafts are mounted on ball bearings and ensure backlash-free transmission of power to the high-grip rubber tyres or drift tyres, which are included in the scope of delivery. Also made of metal are the chassis and gears as well as the differentials.For maximum control and fine-tuning of the Hyper Go Breaker ProDrift, adjustable oil-pressure metal shock absorbers, adjustable suspension and a driving stability system (gyro) are also included. The built-in 45A ESC provides sensitive response during acceleration and the built-in LED lighting with different modes also allows for drifts and on-road racing at dusk. The digital 17g steering servo also ensures good cornering control and stable directional stability. Thanks to the 2.4GHz system, operation with several vehicles at the same time is possible.As a small bonus, a Dust Cover (mud flap) is included, which is placed over the entire middle section inside the vehicle to prevent moisture, dirt and mud from penetrating as far as possible. For long driving times with maximum power, a 2000mAh 7.4V Li-Ion battery and a matching charger are included. The driving time is thus up to 12 minutes.HIGHLIGHTS:Maximum durability: thanks to high-quality metal chassis and metal drive components4WD drive with CVD drive shafts: Even better traction and direct power transmission to all wheelsFURTHER FEATURES:RTR version (ready-to-run) incl. remote control, battery, chargerFully ball bearing mounted vehicle for smooth drive performanceLED lightingPolycarbonate chassis dust coverSturdy metal main strut for added rigidityAdjustable metal oil pressure shock absorbersIndividual components consisting of ESC, servo, gyro and servo for easy repair and parts accessibilityAll plastic parts made of composite plastic for better durability TECHNICAL DATA:Scale: 1:14Length: 320mmWidth: 153mm Height: 115mmWeight: 1124g incl. batteryWheelbase: 190mmTrack width front: 128mmTrack width rear: 128mmGround clearance: 15mmFront wheels: Outer diameter/width 58/22mmRear wheels: Outer diameter/width 58/22mmRim diameter: 42mmFront shocks: 65mmRear shocks: 65mmBrake: ElectronicReceiver incl. Gyro function (driving stability system)ESC: 45A brushless Motor: 2845 3700KVDrive system: CardanDrive system: 4WDSteering servo: Digital 17gMain material: Metal / Composite plasticBattery compartment dimensions: 86 x 38 x 32mmBattery: Li-Ion, 2S 7.4V 2000mAh 15C, round cells, Deans connectorBattery dimensions: 70 x 36 x 20mmBattery weight: 99gRide time: 10-12minTop speed: 40-45km/hRemote control: 4-channel, 2.4GHzRange: 100-150mCharger: LiPo chargerSCOPE OF DELIVERY:ModelRemote controlBatteryChargerDrift tyresStreet tyresOff-road tyresGyroAccessoriesREQUIRED ACCESSORIES:2x 1.5V AA batteries for the remote control

Hyper Go Citroën C3 WRC Rally/Drift 4WD 1:14 RTR The Hyper Go Citroën C3 WRC 1:14 RTR is a highly detailed RC model designed for rally and drift enthusiasts. Featuring a powerful brushless motor, durable metal components, and modern features such as LED lighting and gyro stabilization, this vehicle is perfect for thrilling drives on various surfaces. Features: Realistic replica of the Citroën C3 WRC 4WD drivetrain for optimal traction Powerful 2845 3700KV brushless motor Durable metal differentials and ball-bearing drivetrain Aluminum oil-filled shock absorbers for excellent suspension LED headlights and taillights Built-in gyro system for stable drifts Includes extra drift tires Contents: Ready-to-run Citroën C3 WRC RC model 2.4 GHz radio control system 7.4V 2000mAh Li-Ion battery Charger Additional drift tires Dust cover User manual Required Accessories: Two 1.5V AA batteries for the transmitter Technical Specifications: Scale: 1:14 Drivetrain: 4WD Motor: 2845 3700KV brushless Shock absorbers: Aluminum, oil-filled Battery type: 7.4V 2000mAh Li-Ion Radio control: 2.4 GHz Run time: Up to 15 minutes Charging time: Approx. 2 hours

Amewi Hyper GO Buggy brushless 3S 4WD 1:16 RTR blue The Hyper GO Buggy brushless 3S 4WD 1:16 RTR is a high-performance RC buggy that combines speed, precision, and fun in a compact format. Powered by a brushless motor, the buggy reaches speeds of up to 62 km/h, offering excellent traction and control on various terrains with its 4WD drivetrain. Main Features: Top Speed: Up to 62 km/h Drive: 4WD for optimal traction Motor: Brushless system for maximum performance Controller: 2.4 GHz interference-free Body: Durable and aerodynamic design in blue Technical Specifications: Scale: 1:16 Battery: 3S Li-Ion (included) Runtime: Up to 20 minutes Charging time: Approx. 120 minutes Recommended age: 14+

Push the throttle hard off-road and still never lose control - the Hyper Go monster truck in 1:16 scale accelerates up to 45 km/h with its 2845 brushless racing motor and ensures precise handling with regulation options. These include two adjustable top speed settings, a fast steering servo for agile direction changes, adjustable aluminium oil-pressure shock absorbers, adjustable suspension and an adjustable wheelie bar. Metal CVD drive shafts, metal propshaft and 45A brushless controller incl. active fan round off the equipment.The entire electronics are protected against splash water and allow unrestricted outdoor use. The large high-grip tyres made of soft rubber ensure full grip on any surface. In addition, the model is equipped with a bright switchable LED light for great action even in the dark. The handy 3-channel remote control transmits all functions without interference and also allows the operation of several models in parallel thanks to the 2.4 GHz system. The model is available as an RTR (Ready-to-Run) package, which means that all components - except for household batteries for the remote control - are already included.HIGHLIGHTS:Adjustable chassis: For more directional stability on the front axleMetal cardan shaft: For wear-free drive to the metal differentialsMetal CVD drive shafts: For direct drive to the wheelsOTHER FEATURES:2S LiPo power with 7.4V, 25C and 1050mAh in a hardcase battery specially developed for the seriesProfessional brushless racing motor for high speeds of up to approx. 45km/hFast steering servo for agile directional changes on any surfaceRobust body with internal body frame for high strengthComposite chassis for good durabilityPartial aluminium shock absorbersMetal propshaftFull ball bearingsHigh ground clearance (approx. 40mm)Bonnet with body clips and rubber tabs for safe removalBright switchable LED lighting fittedAdjustable wheelie bar includedTECHNICAL DATA:Scale: 1:16Length: 310mmWidth: 225mmHeight: 125mmWeight: 1048g incl. batteryWheelbase: 175mmTrack width front: 215mmTrack width rear: 215mmGround clearance: approx. 40mmFront wheels: outer diameter/width 80/45mmRear wheels: outside diameter/width 80/45mm Rim diameter: 50mmGearbox: MetalFront shock absorber: 60mmRear damper: 60mmBrake: ElectronicESC: Brushless 45AMotor: 2845 BrushlessDrive system: Cardan metalSteering servo: MiniMain material: Composite plasticBattery compartment dimensions: 110x35x24mmBattery: LiPo 2S 7.4V 1050mAh, 25C, Hardcase, Deans connector / T-Plug, 78x34x29mm, 74gDrive time: up to 12minTop speed: up to 45km/hRemote control: 3-channel, 2,4GHzRange: approx. 100mCharger: USB-Balancer charger with 7,4V 1,5A output powerSCOPE OF DELIVERY:VehicleRemote controlBatteryUSB charging cableWheelie barScrew setToolsInstruction manual DE/ENREQUIRED ACCESSORIES:2x AA Mignon batteries for the remote control

MANIAC Hyper GO Fury Pro Brushless Truck 1/16 Experience boundless driving fun with the MANIAC Fury Pro Brushless Monster Truck! This powerful 1:16 scale RC truck is perfect for true off-road enthusiasts. With a breathtaking top speed of up to 45 km/h and an extremely robust honeycomb-reinforced chassis, the MANIAC Fury Pro guarantees unmatched performance on any terrain. Key Features: Brushless Motor 2845: The powerful 4200KV motor ensures impressive acceleration and maximum efficiency. 2S Lipo Power: Enjoy up to 12 minutes of driving time thanks to the high-performance 2S LiPo battery with 1050mAh. Extra Fast Steering Servo: The installed servo offers an exceptional response time of just 0.10 seconds and a torque of 2.1 kg, perfect for applications requiring quick response times and precise control. Aluminum Oil Shock Absorbers: Experience maximum control and stability with high-quality oil-filled shock absorbers, providing optimal suspension and enhancing the vehicle's handling on rough terrain, jumps, or sharp turns. Splash-Proof Electronics: Makes the truck resistant to dirt, water, and dust, allowing for use even in tough conditions. LED Light Bar: Extra-bright lighting that can be turned on and off via the remote control enables fun driving even in the dark. Metal Differentials and CVD Drive Shafts: Durable components for extreme loads and optimal power transmission. High Ground Clearance: With 40 mm ground clearance, the MANIAC Fury Pro easily overcomes any obstacle. Fully Enclosed Drive Unit: The enclosed drive unit provides significant advantages in terms of maintenance and protection, with a robust cover protecting the drive from dirt, dust, and moisture. User-Friendly Remote Control: The high-quality 3-channel transmitter is optimally sized for comfortable handling by all drivers, allowing you to reduce the truck's maximum speed to 50% or 75% to practice at your own pace before using full power. Technical Specifications: Scale: 1:16 Length: 310mm Width: 225mm Height: 125mm Weight: 1048g (including battery) Wheelbase: 175mm Ground Clearance: 40mm Track Width Front/Rear: 215mm Wheels Front/Rear: 80x45mm Motor: 2845 Brushless Motor with 4200KV ESC: 45A Brushless ESC Remote Control: 3-Channel 2.4GHz Battery Compartment: 110x35x24mm Battery: Hardcase LiPo Battery 7.4V 1050mAh with T-Plug Connector Drive System: Metal Shaft Drive Top Speed: Up to 45 km/h Run Time: Up to 12 minutes Remote Control Range: Approximately 100 meters Included Items: MANIAC Fury Pro Brushless Monster Truck 3-Channel 2.4GHz Remote Control LiPo Battery Hardcase 7.4V 1050mAh with T-Plug Connector USB Charger for 2S LiPo with max 1.5A Charging Current Wheelie Bar Tools and Instruction Manual (DE/EN) Required Accessories (not included): 2x AA Batteries for the Remote Control USB Power Adapter (2A recommended)