Electric RC Cars – Smooth Power, Big Performance

Kit without electronics, Body is not painted.

Kit without electronics, tyres and rims. Body is not painted.

FEATURES:- 2WD rear wheel drive- 2.4GHz remote control- Fully proportional control- Maximum speed can be limited on the remote control- Removable battery SPECIFICATION:- Servo: 3.7g Servo- Motor: 8520 Coreless Motor- Battery: 3.7V 300mAh LiPo Battery- Speed throttleable: Yes- ESP built in: Yes- Charging time: approx. 30-40 minutes- Driving time: approx. 20 minutes- Dimensions (L/W/H): 155x95x65 mm- Weight: 110 g INCLUDED:- 1:24 X-Racer Buggy RTR- 2.4GHz gRemote Control- 300mAh LiPo Battery- USB Charger- Manual REQUIRED ACCESSORIES:- 2 AA Batteries for Remote Control

Features:4WD all wheel drive2.4GHz 4-channel radio system80A brushed speed controller with T-plug540size 15T Motor mit 32.000 U/min @ 7.4V6kg steering servo (25T, ball bearing)4 oil shock absorberBall bearing main driveExtremely durable composite plastic parts Steel differential outdrives Aluminum universal joint drive with steel mountsAdjustable upper track rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish touring car bodyLight-Weight chassis (less weight - longer driving time)Many aluminum option parts availableTechnical Data: Scale: 1:10Dimensions (L/W/H): 470x200x150 mmWeight: 1400gWheelbase: 260mmGround clearance: ca. 15mmTrack width: 170mm front/rearOn-road wheels front/rear: Durchmesser: 65mm / Width: 26mmRally wheels front/rear: Durchmesser: 70mm / Width: 26mmShock-oil: 400CPSDamper installation length: 60mmInternal gear ratio: bevel gear: 13T / ring gear: 38T Motor ratio brushed version: Pinion: 26T / main gear: 58T (module 0.6) Contains: ATC3.4V2 On-Road/Rally Car RTR 2.4GHz CR4S radio systemPlastic clips for shock absorbersStickerManual You need:4x AA batteries for the radio system 7.2V NiMH or 7.4V* LiPo car battery (*recommended)Charger (suitable for car battery)Programming card for individual settings of the speed controller

4WD all wheel drive2.4 GHz 4-channel radio system80A brushed speed controller with T-plug540size 15T motor with 32.000RPM @ 7.4V6kg steering servo (25T, ball bearings)Oil shock absimrbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminum main drive shaft with steel mountsAdjustable upper tie rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish "Cap Forward" buggy body"Light-Weight" chassis (less weight - longer drive time)Many aluminum option parts available Scale: 1:10Dimensions (L/W/H): 380x255x155 mmWeight: 1400gWheelbase: 270mmGround clearance: ca. 30mmTrack width: 215mm front/rearFront wheels: Durchmesser: 88mm / Width: 33mmRear wheels: Durchmesser: 88mm / Width: 42mmShock absorber oil: 400CPSShock absorber installation length: 90mmMotor ratio: pinion: 23T / main gear: 64T (module 0,6) Scope of Delivery: 1/10 Buggy "AB3.4V2" RTR2.4GHz "CR4S" radioSticker sheetManual Required:4x AA Batteries for radio7.2V NiMH or 7.4V* LiPo car battery (*recommended)Charger (suitable for car battery)Programm card for individual settings of the speed controller

The new 80A brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully utilise the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item no. 2110061) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 540 15T brushed motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. Thanks to the higher output of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - regardless of the C-rate and capacity. 4 oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun is guaranteed. A servo with 15kg actuating force and metal gearing handles the steering commands.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that settings can be made easily using levers and rotary knobs. In addition, the remote control has a "beginner mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have much experience in handling such RC vehicles.Highlights:4WD all-wheel drive2.4 GHz 4-channel radio system80A brushed speed controller with T-plug540 15T motor with 32,000 rpm @ 7.4V15kg steering servo with metal gears (25T, ball bearings)4 oil shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish truggy body with plastic add-on parts"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:Scale 1:10Dimensions (L/W/H): 405x325x165 mmWeight: 1740gWheelbase: 270mmGround clearance: approx. 35mmTrack width: 270mm front/rearWheels front/rear: Durchmesser: 105mm / width: 55mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmEngine gear ratio: Pinion: 18T / main gear: 64T (module 0.6) Scope of delivery:1/10 Truggy "AT3.4V2" RTR2.4GHz "CR4S" remote controlSticker sheetinstruction manualadditionally required:4x AA batteries for remote control7.2V NiMH or 7.4V* LiPo drive battery (*recommended)Charger (suitable for the drive battery)Programming card for individual settings of the speed controller

Powerful 1:10 EP Truggy AT3.4-V2 KIT 4WDThe Absima 1:10 EP Truggy "AT3.4-V2 KIT" is a high-quality, electric-powered truggy in 1:10 scale. This 4WD kit provides an excellent foundation for off-road enthusiasts who value performance and quality.Main Features:Robust 4WD drive system for optimal traction on various terrainsHigh-quality materials and precise craftsmanship for durabilityCustomizable components for individual settings and upgradesIdeal for competitions and recreational off-road drivingThe AT3.4-V2 KIT offers a solid foundation for those seeking a reliable and high-performance RC vehicle.

UNBELIEVABLE POWER - the new Hotshot 3.4BL series is equipped with a powerful brushless electric motor and waterproof electronic speed controller (ESC). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.HIGHLIGHTS:Water-resistant 50A BL Speed Controler (programmable)Powerfull 3300KV BL Motor2.4GHz A.F.H.D.S. Radio SystemFull Aluminum ShocksSteel Motor TransmissionPRODUCT FEATURESTransmission: Forward, Brake & ReverseDrive System: 4 Wheel DriveBall bearing transmissionOil filled adjustable shocksGear differential front/rearAluminum motor mountComplete covered transmissionAdjustable turnbuckles & wishbonesAluminum drive shaftFull printed body2.4GHz radio System Sticker sheet for a unique designA lot tune-up parts available!TECHNICAL SPECIFICATION:Measure (L/W/H): 450x190x140 mmWeight: 1300gWheelbase: 260 mmChassis clearance: 20 mmTire width: 27 mm front / 27 mm rearTire Durchmesser: ± 65 mmShock spring force: medium / Length: 62mm f/rShock oil viscosity: 300 f/rSteel Motor transmission: Pinion 29T / Gear 64TPinion module: 0.6MORE FEATURES:BL Speed Controller (2110007): programmable (brake power, neutral brake, drive mode, punch, V cut-off) / NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 50A cont./300A peak / BEC 6V/3A / Overheat cut-off / Drive function: front/reverse/brake (standard) / Plug system: T-plug (Deans style)Servo (2030003): 4kg steering force / 25T outdrive Motor (2130005): 3421KV / 27.400RPM @ 7.4V / Operating voltage: 4.8 - 11.1V / Size: 540 Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimmingSCOPE OF DELIVERYTouring Car "ATC3.4BL" RTR - brushless version2.4GHz Radio SystemManualSticker SheetREQUIRED ACCESSORIES 2S LiPo Battery 7.4VCharger (LiPo suitable) 4x AA Mignon Batteries for Radio

The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-plug. To fully utilise the potential of the vehicle, we recommend a 2S/7.4V LiPo battery for operation. In addition, a separately available programming box (item no. 2110062) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 6kg servo handles the steering commands. The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle enormously. Handling also becomes almost impossible due to the enormous over-motorisation. We therefore generally advise against 3S operation. 4 adjustable aluminium oil-pressure shock absorbers offer ideal handling, making driving a lot of fun. The spring preload can be adjusted using a knurled screw. This allows the suspension to be perfectly customised to your needs.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that the settings can be easily adjusted using levers Highlights:4WD all-wheel drive2.4 GHz 4-channel remote control system60A brushless speed controller (waterproof; T-plug; programmable)3421KV brushless motor (sensorless; splash-proof)6kg steering servo (25T, ball bearing)4 aluminium oil pressure shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outletsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish "Cap Forward" buggy bodywork"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:1:10 scaleDimensions (L/W/H): 380x255x155 mmWeight: 1530gWheelbase: 270mmGround clearance: approx. 30mmTrack width: 215mm front/rearFront wheels: Durchmesser: 88mm / width: 33mmRear wheels: Durchmesser: 88mm / width: 42mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmMotor gear ratio: pinion: 26T / main gear: 64T (module 0.6) Scope of delivery:1/10 Brushless Buggy "AB3.4BLV2" RTR2.4GHz "CR4S" remote controlSticker sheetOperating instructionsadditionally required:4x AA batteries for remote control7.4V/2S* LiPo drive battery (*recommended)Charger for LiPo batteriesProgramming box for individual settings on the speed controller

The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-plug. To fully utilise the potential of the vehicle, we recommend a 2S/7.4V LiPo battery for operation. In addition, a separately available programming box (item no. 2110062) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 6kg servo handles the steering commands. The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle enormously. Handling also becomes almost impossible due to the enormous over-motorisation. We therefore generally advise against 3S operation. 4 adjustable aluminium oil-pressure shock absorbers offer ideal handling, making driving a lot of fun. The spring preload can be adjusted using a knurled screw. This allows the suspension to be perfectly customised to your needs.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that the settings can be easily adjusted using levers Highlights:4WD all-wheel drive2.4 GHz 4-channel remote control system60A brushless speed controller (waterproof; T-plug; programmable)3421KV brushless motor (sensorless; splash-proof)15kg steering servo with metal gears (25T, ball bearings)4 aluminium oil pressure shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outletsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish truggy body with plastic add-on parts"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:Scale 1:10Dimensions (L/W/H): 405x325x165 mmWeight: 1780gWheelbase: 270mmGround clearance: approx. 35mmTrack width: 270mm front/rearWheels front/rear: Durchmesser: 105mm / width: 55mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmEngine gear ratio: pinion: 23T / main gear: 64T (module 0.6) Scope of delivery:1/10 Brushless Truggy "AT3.4BLV2" RTR2.4GHz "CR4S" remote controlSticker sheetinstruction manualadditionally required:4x AA batteries for remote control7.4V/2S* LiPo drive battery (*recommended)Charger for LiPo batteriesProgramming box for individual settings on the speed controller

1:8 Buggy "STOKE V2" green 4S RTRThe 1:8 Buggy "STOKE V2" in green is a high-performance and robust RC vehicle designed for off-road adventures. With its 4WD drive and modern racing design, it offers agile handling and optimized performance.Main Features:Powerful Drive: Equipped with a 3668 brushless motor with 2300KV and a 120A speed controller, the buggy reaches speeds of up to 70 km/h in 4S LiPo operation.Robust Construction: Extremely durable composite plastic parts, a 3 mm aluminum chassis plate with ABSIMA laser engraving, and fully ball-bearing components ensure longevity and reliability.High-Quality Suspension: Adjustable 16 mm "Big Bore" aluminum shock absorbers provide excellent driving behavior on various terrains.Precise Steering: The 9 kg steering servo with metal gears and aluminum servo horn enables precise steering movements.Customizable Performance: The speed controller is programmable (programming box optionally available), allowing punch and braking force to be individually adjusted. Additionally, the remote control offers a "beginner mode" with 50% power limitation for novices.Technical Specifications:Scale: 1:8Drive Type: 4WD All-Wheel DriveWheelbase: 345 mmGround Clearance: 35 mmWheels: Ø 115 mm / Width 43 mmGear Ratio: Pinion 15T / Main Gear 49TDimensions (L/W/H): 550 x 310 x 180 mmWeight: 3150 g

Discover the RC model sport with the "First Step Performance" from Absima. Up to 36 KM/H and power to the max you will get with this awesome model. Of course you will be supported by real RC technique. A safe 2.4 GHz remote control system supports the electronic speed controller to release the power at your command. This RC buggy is made of high quality and strong material with capacity in anti-collision and beat resistance. With soft hollow rubber tires and professional shock absorbing system features great performance. Take the first step into the world of RC modelsport with this ready-to-run set!Enjoying real RC racing with the 1/14 4WD RC car, you can get started quickly and handle it like a pro. Competing with other advanced RC car lovers and enjoying the exciting racing on the street, in your backyard or in the woods!.HIGHLIGHTS:Water-resistant electronicIncl. car batteries and USB charging cable Speed up to 36 KM/HAll spare parts availableNice handling - perfect fro beginnersGENERAL CHASSIS FEATURES: 1/14th Scale4WDCompletely ball bearing mounted2.2kg Steering ServoFront & rear differentialsComplete covered transmission Gears made from extreme durable nylon materialPinion made from copper Independent suspension systemHigh performance 390 Motor and speed controllerFront CVD drive shafts Range aprox. 60mDrive time: aprox. 16 MinutesAluminum cardan shafts Adjustable speed via remote controlOverheat protection Incl. 2.4GHz radio systemNice detailed body designOvercharge & Over-discharge Protection 2x 3.7V 1500mAh Li-Ion Car Battery"Saddle Pack" battery layout for a perfect weight distribution TECHNICAL SPECIFICATION:Car size: (L/W/H): 292 x 210 x 126 mmWeight: 795g (w/o batteries)Wheelbase: 190 mmChassis Clearance: 35 mmTire Width: 40 mmWheel Durchmesser: : ± 80 mmShock Oil Viscosity : n.a.Shock Spring Force: MediumShock Instalation Length: 65 mm front/rearSCOPE OF DELIVERY: 1/14th RC Car 2.4 GHz Radio System 2x Li-Ion 3.7V 1500mAh Car BatteriesUSB Charging CableManualREQUIRED ACCESSORIES:3 AA Cells for Radio

Highlights:Splash-proof Includes rechargeable battery and USB charging cable LED headlight included Original spare parts available Features:4WD all-wheel driveFully ball-bearing mounted2 differentials High-current plug (T-plug) High-performance motor and 40A speed controllerCVD drive shafts (front)Radio range approx. 60m Travel time with full battery: +/20 minutesAluminum gimbal driveAdjustable speed on the transmitterOverheating protectionLED front lighting included2.4 GHz remote control system includedBodywork with sticker sheet to design yourself Technical data:Dimensions (L/W/H): 270 x 215 x 125 mmWeight: 710 gWheelbase: 175 mmGround clearance: 45 mmTrack width: 175 mm front / 175 mm rearTires: Monster Rubber / 5 double-spoke rimWheels front/rear: 40 mm width / Durchmesser: ± 80 mmIncluded are: Mini AT Monster Truggy2.4 GHz remote control system7.4V Li-Ion battery 1500mAhUSB charging cableWheelie barAdditionally required:3x AA batteries for the remote control

Programmable 150A Electronic Speed Controller (ESC) 4282size Brushless Motor with 2000KVAluminum Middle Differential CaseHardened steel drive components4mm "One-Piece" Aluminum Chassis PlateA multi-piece very detailed body available in neon-green or neon-orangeLED front headlights, taillights and light bar on the roofFully detailed interior with 2 figures, dashboard and control panelRoll cage, driver safety netsMulti-terrain wheels with beadlock-look and closed hubcaps Full size spare wheelOptional mountable wheelie bar Chassis and Drive Units:"One-Piece" 4mm aluminum chassis - anodized and with ABSIMA engraving "Tower-to-Tower” Aluminum braces for maximum durabilityCenter differential with sturdy aluminum housing Metal differential outdrives 5mm Steel drive shafts and CVD shafts at the front6mm CNC Aluminum shock towersAdjustable aluminum oil-filled shock absorbers Aluminum wheel hubs and steering armsAluminum steering braceAluminum wishbone bracket front and rearAluminum motor mount and center differential mountWishbones made of glass fiber reinforced material 5mm Threaded rods front and rear Completely ball bearing mounted drive train Extra-rugged front bumper and spare wheel holder Stabilizer set front and rear Elektronic components:The ABSIMA CR4S 4-channel remote control including R4WP-Micro receiver has a foam rubber steering wheel and a "beginner mode" which reduces the engine power to 50%. In addition, you have 2 more channels available to control, for example, the separately available mechanical handbrake. Fast and precise 25kg steering servo with metal gear. Big car, big motor! A 4282 brushless motor with 2000KV provide plenty of propulsion. This monster with 42mm diameter and 82mm length is cooled by two 30mm high-speed fans. The ESC with its 150A continuous current also has a fan which ensures a perfect operating temperature. The electronics are powered by either two 2S batteries or two 3S batteries with XT90 high current connectors which fit perfectly into the two battery compartments in the rear of the vehicle. Due to the well thought-out distribution of all components, an optimal weight distribution is guaranteed. Scale: 1/7Drivetrain: 4WDLength: 680mmWidth: 380mmHeight: 230mmWeight: 5,8kg (without batteries) Ground Clearance: 55mmWheelbase: 419mmTrack front/rear: 330mm/320mm Chassis: One-Piece 4mm Aluminum Chassis Plate Suspension: Independent Shock Absober (front): 110mm, oil-filled Shock Absorber (rear): 130mm, oil-filled Wheels: 165x63mm, All-TerrainRims: ø90mm; Beadlock-look Ball Bearing: Complete ball bearing drive train Motor Type: Brushless, SensorlessMotor Power: 2000KVMotor Size: 4282 (ø42mm x Length 82mm) Motor Cooling: 2* High-Speed Fans mounted on a Aluminum Heatsink Pinion: 13T, Modul 1.0Spur Gear: 50TFinal Drive Ratio: 15.1 Electronic Speed Controller: 150A ESC with XT90 Plugs and Cooling Fan Load: 150A Continuous / 720A PeakBEC: 6.1V or 7.4V / 3A (Switch Mode)ESC programmable: YES (with optional program box) Drive System: 5mm CVD Shafts (front) and 5mm Metal Cardan Shafts Battery Compartments: 4,9 x 15,5 cmOperation with: 2* 2S/7.4V LiPo Batteries or 2* 3S/11.1V LiPoBatteries High Speed: +/-100 km/h (with 2x 3S LiPo batteries) Radio: "CR4S" 4-Channel 2.4GHz Steering Servo: 25kg, Metal Gearadditional needed:Lipo Batteries with XT90Lipo ChargerBatteries 4x Radio

Programmable 150A Electronic Speed Controller (ESC) 4282size Brushless Motor with 2000KVAluminum Middle Differential CaseHardened steel drive components4mm "One-Piece" Aluminum Chassis PlateA multi-piece very detailed body available in neon-green or neon-orangeLED front headlights, taillights and light bar on the roofFully detailed interior with 2 figures, dashboard and control panelRoll cage, driver safety netsMulti-terrain wheels with beadlock-look and closed hubcaps Full size spare wheelOptional mountable wheelie bar Chassis and Drive Units:"One-Piece" 4mm aluminum chassis - anodized and with ABSIMA engraving "Tower-to-Tower” Aluminum braces for maximum durabilityCenter differential with sturdy aluminum housing Metal differential outdrives 5mm Steel drive shafts and CVD shafts at the front6mm CNC Aluminum shock towersAdjustable aluminum oil-filled shock absorbers Aluminum wheel hubs and steering armsAluminum steering braceAluminum wishbone bracket front and rearAluminum motor mount and center differential mountWishbones made of glass fiber reinforced material 5mm Threaded rods front and rear Completely ball bearing mounted drive train Extra-rugged front bumper and spare wheel holder Stabilizer set front and rear Elektronic components:The ABSIMA CR4S 4-channel remote control including R4WP-Micro receiver has a foam rubber steering wheel and a "beginner mode" which reduces the engine power to 50%. In addition, you have 2 more channels available to control, for example, the separately available mechanical handbrake. Fast and precise 25kg steering servo with metal gear. Big car, big motor! A 4282 brushless motor with 2000KV provide plenty of propulsion. This monster with 42mm diameter and 82mm length is cooled by two 30mm high-speed fans. The ESC with its 150A continuous current also has a fan which ensures a perfect operating temperature. The electronics are powered by either two 2S batteries or two 3S batteries with XT90 high current connectors which fit perfectly into the two battery compartments in the rear of the vehicle. Due to the well thought-out distribution of all components, an optimal weight distribution is guaranteed. Scale: 1/7Drivetrain: 4WDLength: 680mmWidth: 380mmHeight: 230mmWeight: 5,8kg (without batteries) Ground Clearance: 55mmWheelbase: 419mmTrack front/rear: 330mm/320mm Chassis: One-Piece 4mm Aluminum Chassis Plate Suspension: Independent Shock Absober (front): 110mm, oil-filled Shock Absorber (rear): 130mm, oil-filled Wheels: 165x63mm, All-TerrainRims: ø90mm; Beadlock-look Ball Bearing: Complete ball bearing drive train Motor Type: Brushless, SensorlessMotor Power: 2000KVMotor Size: 4282 (ø42mm x Length 82mm) Motor Cooling: 2* High-Speed Fans mounted on a Aluminum Heatsink Pinion: 13T, Modul 1.0Spur Gear: 50TFinal Drive Ratio: 15.1 Electronic Speed Controller: 150A ESC with XT90 Plugs and Cooling Fan Load: 150A Continuous / 720A PeakBEC: 6.1V or 7.4V / 3A (Switch Mode)ESC programmable: YES (with optional program box) Drive System: 5mm CVD Shafts (front) and 5mm Metal Cardan Shafts Battery Compartments: 4,9 x 15,5 cmOperation with: 2* 2S/7.4V LiPo Batteries or 2* 3S/11.1V LiPoBatteries High Speed: +/-100 km/h (with 2x 3S LiPo batteries) Radio: "CR4S" 4-Channel 2.4GHz Steering Servo: 25kg, Metal Gearadditional needed:Lipo Batteries with XT90Lipo ChargerBatteries 4x Radio

The next addition to our popular Hyper Go series: the Breaker ProDrift-1.4 with top-of-the-range equipment in 1:14 scale. Performance, body and driving characteristics set new standards in the vehicle category of this size. A 2845 3700KV brushless motor is available as the drive, which distributes its power to all four wheels via solid metal drive shafts. The built-in CVD shafts are mounted on ball bearings and ensure backlash-free transmission of power to the high-grip rubber tyres or drift tyres, which are included in the scope of delivery. Also made of metal are the chassis and gears as well as the differentials.For maximum control and fine-tuning of the Hyper Go Breaker ProDrift, adjustable oil-pressure metal shock absorbers, adjustable suspension and a driving stability system (gyro) are also included. The built-in 45A ESC provides sensitive response during acceleration and the built-in LED lighting with different modes also allows for drifts and on-road racing at dusk. The digital 17g steering servo also ensures good cornering control and stable directional stability. Thanks to the 2.4GHz system, operation with several vehicles at the same time is possible.As a small bonus, a Dust Cover (mud flap) is included, which is placed over the entire middle section inside the vehicle to prevent moisture, dirt and mud from penetrating as far as possible. For long driving times with maximum power, a 2000mAh 7.4V Li-Ion battery and a matching charger are included. The driving time is thus up to 12 minutes.HIGHLIGHTS:Maximum durability: thanks to high-quality metal chassis and metal drive components4WD drive with CVD drive shafts: Even better traction and direct power transmission to all wheelsFURTHER FEATURES:RTR version (ready-to-run) incl. remote control, battery, chargerFully ball bearing mounted vehicle for smooth drive performanceLED lightingPolycarbonate chassis dust coverSturdy metal main strut for added rigidityAdjustable metal oil pressure shock absorbersIndividual components consisting of ESC, servo, gyro and servo for easy repair and parts accessibilityAll plastic parts made of composite plastic for better durability TECHNICAL DATA:Scale: 1:14Length: 320mmWidth: 153mm Height: 115mmWeight: 1124g incl. batteryWheelbase: 190mmTrack width front: 128mmTrack width rear: 128mmGround clearance: 15mmFront wheels: Outer diameter/width 58/22mmRear wheels: Outer diameter/width 58/22mmRim diameter: 42mmFront shocks: 65mmRear shocks: 65mmBrake: ElectronicReceiver incl. Gyro function (driving stability system)ESC: 45A brushless Motor: 2845 3700KVDrive system: CardanDrive system: 4WDSteering servo: Digital 17gMain material: Metal / Composite plasticBattery compartment dimensions: 86 x 38 x 32mmBattery: Li-Ion, 2S 7.4V 2000mAh 15C, round cells, Deans connectorBattery dimensions: 70 x 36 x 20mmBattery weight: 99gRide time: 10-12minTop speed: 40-45km/hRemote control: 4-channel, 2.4GHzRange: 100-150mCharger: LiPo chargerSCOPE OF DELIVERY:ModelRemote controlBatteryChargerDrift tyresStreet tyresOff-road tyresGyroAccessoriesREQUIRED ACCESSORIES:2x 1.5V AA batteries for the remote control

Hyper Go Citroën C3 WRC Rally/Drift 4WD 1:14 RTR The Hyper Go Citroën C3 WRC 1:14 RTR is a highly detailed RC model designed for rally and drift enthusiasts. Featuring a powerful brushless motor, durable metal components, and modern features such as LED lighting and gyro stabilization, this vehicle is perfect for thrilling drives on various surfaces. Features: Realistic replica of the Citroën C3 WRC 4WD drivetrain for optimal traction Powerful 2845 3700KV brushless motor Durable metal differentials and ball-bearing drivetrain Aluminum oil-filled shock absorbers for excellent suspension LED headlights and taillights Built-in gyro system for stable drifts Includes extra drift tires Contents: Ready-to-run Citroën C3 WRC RC model 2.4 GHz radio control system 7.4V 2000mAh Li-Ion battery Charger Additional drift tires Dust cover User manual Required Accessories: Two 1.5V AA batteries for the transmitter Technical Specifications: Scale: 1:14 Drivetrain: 4WD Motor: 2845 3700KV brushless Shock absorbers: Aluminum, oil-filled Battery type: 7.4V 2000mAh Li-Ion Radio control: 2.4 GHz Run time: Up to 15 minutes Charging time: Approx. 2 hours

Hyper Go Lancia Delta HF Integrale Rallye Drift 4WD 1:14 RTRLicensed Lancia Delta HF Integrale rally body in 1:14 scalePowerful brushless motor for high speed performance4WD all-wheel-drive system for precise control on tarmac, gravel and driftIntegrated gyro system for stabilized drifting and easy handlingCompact RTR set – ready to run with radio, battery and charger included

Hyper Go Citroen C3 WRC Rally Brushless 4WD 1:7 ARTROfficially licensed Citroen C3 WRC rally body in 1:7 scalePowerful brushless system reaching speeds over 65 km/h4WD drivetrain with gyro for maximum control at high speed and driftingARTR version – almost ready to run, requires separate radio and receiverPerfect for rally and on-road racing, highly detailed scale appearance

Super Scale Dune Buggy in 1:7 scale with finest equipment and a top speed of up to 130km/h (optional with 8S LiPo). The RXB7 combines very high-quality components with an extreme drive concept and top equipment such as 2x 3S LiPo batteries included, a high-quality and precise 2.4GHz remote control, a LiPo charger and many milled aluminium parts. A handbrake controlled via the transmitter, which allows the vehicle to drift perfectly into corners on dusty tracks, is just one highlight of this brute buggy. The unbridled power of the 4282 brushless motor with a specific speed of 2000KV is finely controlled via a 150A regulator and is distributed via steel cardan shafts to the differentials and from there via steel CVD drive shafts to the 4 wheels (4WD). The powerful steering servo with metal gears and an actuating force of 25kg always ensures maximum performance and a very direct steering response on any surface. The two shock towers, the wishbone brackets, steering arms and C-hubs as well as the chassis strut are CNC-machined from high-quality aluminium. The chassis plate is made of solid 4mm thick aluminium and ensures perfect rigidity of the chassis. Main gear and differential gears are made of steel and guarantee a long service life. All gearbox parts are CNC milled for maximum accuracy of fit. To prevent overheating, both the motor and the 150A brushless controller are equipped with fans to counteract the heat generated during operation. The mechanical brake of the model is controlled by a 15kg metal gear servo and this can be used in addition to the electric brake of the controller to bring the model into a perfect drift angle. For a very good balance of the vehicle and perfect grip level of the specially developed 165mm tyres provide in addition to the fully adjustable chassis, the massive oil pressure shock absorbers. The beautiful body of the model made of sturdy polycarbonate is also visually an absolute gem, which gives the model a very aggressive and off-road typical look. The RXB7 is equipped with an LED lighting system, which can not only be switched on and off via the transmitter, but also allows different lighting modes. A very brightly illuminated light bar on the roof of the buggy ensures perfect illumination of the track.HIGHLIGHTS:CNC-machined steel gears - For best performance, durability and power transmission, the HC7's gear parts are CNC-machined from high-strength steel.150A ESC - a custom-programmed brushless controller is used for smooth control of the 2000KV brushless motor.Complete servo controlled brake system (handbrake).FURTHER FEATURES:Solid, torsionally stiff 4mm aluminium chassis - for stable handlingCNC-machined aluminium front and rear shock towersDouble aluminium chassis bracingHigh-quality and hardened steel CVD drive shaftsAll gearbox parts are CNC-machined from high-quality steelSteering knuckles and steering arms made of milled aluminiumVehicle fully ball bearing mountedFront and rear suspension can be easily and precisely adjusted and optimised for different surfaces.Water-protected receiver boxTyres with perfect rubber compound for racing and driftingMachined aluminium wishbone brackets for maximum durabilityHigh-performance brushless motor with 2000KV and double fanHigh-power regulator with 150A and XT90 connector2x 3S LiPo battery with 5000mAh and XT90 connectorMetal gear servos for steering and handbrakeHigh-quality 4 channel 2.4GHz remote control with maximum range and sensitive controlTECHNICAL DATA:Scale: 1:7Length: 680mmWidth: 380mm Height: 225mmWeight: approx. 6,2kgWheelbase: 419mmTrack width front: 330mmTrack width rear: 320mmGround clearance: 55mmFront wheels: Outer diameter/width 165 / 63mmRear wheels: Outer diameter/width 165 / 63mmRim diameter: 90mmGearbox: SteelGear ratio: 15:1Front shocks: 102mmRear damper: 102mmBrake: electronic and brake disc via 15kg metal gear servo controlledESC: 150A ESC with XT90 connectorMotor: 4282 brushless motor with 2000KVDrive system: metal cardan shaftSteering servo: Standard servo with metal gearbox and 25kg actuating forceMain material: metalBattery compartment dimensions: 140 x 45 x 50mmBattery: 2x LiPo, 3S, 11,1V, 5000mAh 35C, Softcase XT90 connector LxWxH: 140x40x25mm Weight: 350gDriving time: approx. 10 - 15 minTop speed: up to max. 130km/h (with 2x 4S LiPo batteries optional) Remote control: 4 channel 2,4GHz remote controlRange: max. 400mCharger: BX3 Balancer charger 220VCharging time: approx. 3 - 4 hours per batterySCOPE OF DELIVERY:ModelTransmitter2x battery 3S LiPoChargerDecal sheetManual DE/ENREQUIRED ACCESSORIES:4x AA Batteries for Transmitter

Amewi Hyper GO Buggy brushless 3S 4WD 1:16 RTR blue The Hyper GO Buggy brushless 3S 4WD 1:16 RTR is a high-performance RC buggy that combines speed, precision, and fun in a compact format. Powered by a brushless motor, the buggy reaches speeds of up to 62 km/h, offering excellent traction and control on various terrains with its 4WD drivetrain. Main Features: Top Speed: Up to 62 km/h Drive: 4WD for optimal traction Motor: Brushless system for maximum performance Controller: 2.4 GHz interference-free Body: Durable and aerodynamic design in blue Technical Specifications: Scale: 1:16 Battery: 3S Li-Ion (included) Runtime: Up to 20 minutes Charging time: Approx. 120 minutes Recommended age: 14+

Hyper GO Short Course Truck Brushless 4WD 1:14 RTR1:14 short course truck powered by a strong brushless system4WD drivetrain for maximum grip and controlAluminium oil shocks and durable suspension designRTR package – ready to run with transmitter, battery and chargerFor beginners and advanced drivers, top speed up to ~45 km/h

Team Corally SSX-125 7075 Edition 1/12 Pan Car Kit7075 aluminum chassis – ultra-light and extremely rigid1/12 competition pan car kit for top-level racing performancePrecision components with optimized suspension geometryVery low center of gravity design for maximum cornering stabilityKit version without electronics – choose your own motor, servo and ESC

Team Corally SSX-125 Carbon Edition 1/12 Pan Car KitCarbon chassis – ultra-lightweight and highly durable1/12 competition pan car kit for maximum racing performanceOptimized suspension geometry for precise handlingLow center of gravity for excellent cornering stabilityKit version without electronics – allows full customization