4WD Buggy – Electric All-Wheel RC Off-Road Cars

4WD all wheel drive2.4 GHz 4-channel radio system80A brushed speed controller with T-plug540size 15T motor with 32.000RPM @ 7.4V6kg steering servo (25T, ball bearings)Oil shock absimrbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminum main drive shaft with steel mountsAdjustable upper tie rods5mm aluminum motor mount6mm shock towers2 differentials (front/rear)Stylish "Cap Forward" buggy body"Light-Weight" chassis (less weight - longer drive time)Many aluminum option parts available Scale: 1:10Dimensions (L/W/H): 380x255x155 mmWeight: 1400gWheelbase: 270mmGround clearance: ca. 30mmTrack width: 215mm front/rearFront wheels: Durchmesser: 88mm / Width: 33mmRear wheels: Durchmesser: 88mm / Width: 42mmShock absorber oil: 400CPSShock absorber installation length: 90mmMotor ratio: pinion: 23T / main gear: 64T (module 0,6) Scope of Delivery: 1/10 Buggy "AB3.4V2" RTR2.4GHz "CR4S" radioSticker sheetManual Required:4x AA Batteries for radio7.2V NiMH or 7.4V* LiPo car battery (*recommended)Charger (suitable for car battery)Programm card for individual settings of the speed controller

The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-plug. To fully utilise the potential of the vehicle, we recommend a 2S/7.4V LiPo battery for operation. In addition, a separately available programming box (item no. 2110062) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 6kg servo handles the steering commands. The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle enormously. Handling also becomes almost impossible due to the enormous over-motorisation. We therefore generally advise against 3S operation. 4 adjustable aluminium oil-pressure shock absorbers offer ideal handling, making driving a lot of fun. The spring preload can be adjusted using a knurled screw. This allows the suspension to be perfectly customised to your needs.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that the settings can be easily adjusted using levers Highlights:4WD all-wheel drive2.4 GHz 4-channel remote control system60A brushless speed controller (waterproof; T-plug; programmable)3421KV brushless motor (sensorless; splash-proof)6kg steering servo (25T, ball bearing)4 aluminium oil pressure shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outletsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish "Cap Forward" buggy bodywork"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:1:10 scaleDimensions (L/W/H): 380x255x155 mmWeight: 1530gWheelbase: 270mmGround clearance: approx. 30mmTrack width: 215mm front/rearFront wheels: Durchmesser: 88mm / width: 33mmRear wheels: Durchmesser: 88mm / width: 42mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmMotor gear ratio: pinion: 26T / main gear: 64T (module 0.6) Scope of delivery:1/10 Brushless Buggy "AB3.4BLV2" RTR2.4GHz "CR4S" remote controlSticker sheetOperating instructionsadditionally required:4x AA batteries for remote control7.4V/2S* LiPo drive battery (*recommended)Charger for LiPo batteriesProgramming box for individual settings on the speed controller

1:8 Buggy "STOKE V2" green 4S RTRThe 1:8 Buggy "STOKE V2" in green is a high-performance and robust RC vehicle designed for off-road adventures. With its 4WD drive and modern racing design, it offers agile handling and optimized performance.Main Features:Powerful Drive: Equipped with a 3668 brushless motor with 2300KV and a 120A speed controller, the buggy reaches speeds of up to 70 km/h in 4S LiPo operation.Robust Construction: Extremely durable composite plastic parts, a 3 mm aluminum chassis plate with ABSIMA laser engraving, and fully ball-bearing components ensure longevity and reliability.High-Quality Suspension: Adjustable 16 mm "Big Bore" aluminum shock absorbers provide excellent driving behavior on various terrains.Precise Steering: The 9 kg steering servo with metal gears and aluminum servo horn enables precise steering movements.Customizable Performance: The speed controller is programmable (programming box optionally available), allowing punch and braking force to be individually adjusted. Additionally, the remote control offers a "beginner mode" with 50% power limitation for novices.Technical Specifications:Scale: 1:8Drive Type: 4WD All-Wheel DriveWheelbase: 345 mmGround Clearance: 35 mmWheels: Ø 115 mm / Width 43 mmGear Ratio: Pinion 15T / Main Gear 49TDimensions (L/W/H): 550 x 310 x 180 mmWeight: 3150 g

Programmable 150A Electronic Speed Controller (ESC) 4282size Brushless Motor with 2000KVAluminum Middle Differential CaseHardened steel drive components4mm "One-Piece" Aluminum Chassis PlateA multi-piece very detailed body available in neon-green or neon-orangeLED front headlights, taillights and light bar on the roofFully detailed interior with 2 figures, dashboard and control panelRoll cage, driver safety netsMulti-terrain wheels with beadlock-look and closed hubcaps Full size spare wheelOptional mountable wheelie bar Chassis and Drive Units:"One-Piece" 4mm aluminum chassis - anodized and with ABSIMA engraving "Tower-to-Tower” Aluminum braces for maximum durabilityCenter differential with sturdy aluminum housing Metal differential outdrives 5mm Steel drive shafts and CVD shafts at the front6mm CNC Aluminum shock towersAdjustable aluminum oil-filled shock absorbers Aluminum wheel hubs and steering armsAluminum steering braceAluminum wishbone bracket front and rearAluminum motor mount and center differential mountWishbones made of glass fiber reinforced material 5mm Threaded rods front and rear Completely ball bearing mounted drive train Extra-rugged front bumper and spare wheel holder Stabilizer set front and rear Elektronic components:The ABSIMA CR4S 4-channel remote control including R4WP-Micro receiver has a foam rubber steering wheel and a "beginner mode" which reduces the engine power to 50%. In addition, you have 2 more channels available to control, for example, the separately available mechanical handbrake. Fast and precise 25kg steering servo with metal gear. Big car, big motor! A 4282 brushless motor with 2000KV provide plenty of propulsion. This monster with 42mm diameter and 82mm length is cooled by two 30mm high-speed fans. The ESC with its 150A continuous current also has a fan which ensures a perfect operating temperature. The electronics are powered by either two 2S batteries or two 3S batteries with XT90 high current connectors which fit perfectly into the two battery compartments in the rear of the vehicle. Due to the well thought-out distribution of all components, an optimal weight distribution is guaranteed. Scale: 1/7Drivetrain: 4WDLength: 680mmWidth: 380mmHeight: 230mmWeight: 5,8kg (without batteries) Ground Clearance: 55mmWheelbase: 419mmTrack front/rear: 330mm/320mm Chassis: One-Piece 4mm Aluminum Chassis Plate Suspension: Independent Shock Absober (front): 110mm, oil-filled Shock Absorber (rear): 130mm, oil-filled Wheels: 165x63mm, All-TerrainRims: ø90mm; Beadlock-look Ball Bearing: Complete ball bearing drive train Motor Type: Brushless, SensorlessMotor Power: 2000KVMotor Size: 4282 (ø42mm x Length 82mm) Motor Cooling: 2* High-Speed Fans mounted on a Aluminum Heatsink Pinion: 13T, Modul 1.0Spur Gear: 50TFinal Drive Ratio: 15.1 Electronic Speed Controller: 150A ESC with XT90 Plugs and Cooling Fan Load: 150A Continuous / 720A PeakBEC: 6.1V or 7.4V / 3A (Switch Mode)ESC programmable: YES (with optional program box) Drive System: 5mm CVD Shafts (front) and 5mm Metal Cardan Shafts Battery Compartments: 4,9 x 15,5 cmOperation with: 2* 2S/7.4V LiPo Batteries or 2* 3S/11.1V LiPoBatteries High Speed: +/-100 km/h (with 2x 3S LiPo batteries) Radio: "CR4S" 4-Channel 2.4GHz Steering Servo: 25kg, Metal Gearadditional needed:Lipo Batteries with XT90Lipo ChargerBatteries 4x Radio

Programmable 150A Electronic Speed Controller (ESC) 4282size Brushless Motor with 2000KVAluminum Middle Differential CaseHardened steel drive components4mm "One-Piece" Aluminum Chassis PlateA multi-piece very detailed body available in neon-green or neon-orangeLED front headlights, taillights and light bar on the roofFully detailed interior with 2 figures, dashboard and control panelRoll cage, driver safety netsMulti-terrain wheels with beadlock-look and closed hubcaps Full size spare wheelOptional mountable wheelie bar Chassis and Drive Units:"One-Piece" 4mm aluminum chassis - anodized and with ABSIMA engraving "Tower-to-Tower” Aluminum braces for maximum durabilityCenter differential with sturdy aluminum housing Metal differential outdrives 5mm Steel drive shafts and CVD shafts at the front6mm CNC Aluminum shock towersAdjustable aluminum oil-filled shock absorbers Aluminum wheel hubs and steering armsAluminum steering braceAluminum wishbone bracket front and rearAluminum motor mount and center differential mountWishbones made of glass fiber reinforced material 5mm Threaded rods front and rear Completely ball bearing mounted drive train Extra-rugged front bumper and spare wheel holder Stabilizer set front and rear Elektronic components:The ABSIMA CR4S 4-channel remote control including R4WP-Micro receiver has a foam rubber steering wheel and a "beginner mode" which reduces the engine power to 50%. In addition, you have 2 more channels available to control, for example, the separately available mechanical handbrake. Fast and precise 25kg steering servo with metal gear. Big car, big motor! A 4282 brushless motor with 2000KV provide plenty of propulsion. This monster with 42mm diameter and 82mm length is cooled by two 30mm high-speed fans. The ESC with its 150A continuous current also has a fan which ensures a perfect operating temperature. The electronics are powered by either two 2S batteries or two 3S batteries with XT90 high current connectors which fit perfectly into the two battery compartments in the rear of the vehicle. Due to the well thought-out distribution of all components, an optimal weight distribution is guaranteed. Scale: 1/7Drivetrain: 4WDLength: 680mmWidth: 380mmHeight: 230mmWeight: 5,8kg (without batteries) Ground Clearance: 55mmWheelbase: 419mmTrack front/rear: 330mm/320mm Chassis: One-Piece 4mm Aluminum Chassis Plate Suspension: Independent Shock Absober (front): 110mm, oil-filled Shock Absorber (rear): 130mm, oil-filled Wheels: 165x63mm, All-TerrainRims: ø90mm; Beadlock-look Ball Bearing: Complete ball bearing drive train Motor Type: Brushless, SensorlessMotor Power: 2000KVMotor Size: 4282 (ø42mm x Length 82mm) Motor Cooling: 2* High-Speed Fans mounted on a Aluminum Heatsink Pinion: 13T, Modul 1.0Spur Gear: 50TFinal Drive Ratio: 15.1 Electronic Speed Controller: 150A ESC with XT90 Plugs and Cooling Fan Load: 150A Continuous / 720A PeakBEC: 6.1V or 7.4V / 3A (Switch Mode)ESC programmable: YES (with optional program box) Drive System: 5mm CVD Shafts (front) and 5mm Metal Cardan Shafts Battery Compartments: 4,9 x 15,5 cmOperation with: 2* 2S/7.4V LiPo Batteries or 2* 3S/11.1V LiPoBatteries High Speed: +/-100 km/h (with 2x 3S LiPo batteries) Radio: "CR4S" 4-Channel 2.4GHz Steering Servo: 25kg, Metal Gearadditional needed:Lipo Batteries with XT90Lipo ChargerBatteries 4x Radio

Super Scale Dune Buggy in 1:7 scale with finest equipment and a top speed of up to 130km/h (optional with 8S LiPo). The RXB7 combines very high-quality components with an extreme drive concept and top equipment such as 2x 3S LiPo batteries included, a high-quality and precise 2.4GHz remote control, a LiPo charger and many milled aluminium parts. A handbrake controlled via the transmitter, which allows the vehicle to drift perfectly into corners on dusty tracks, is just one highlight of this brute buggy. The unbridled power of the 4282 brushless motor with a specific speed of 2000KV is finely controlled via a 150A regulator and is distributed via steel cardan shafts to the differentials and from there via steel CVD drive shafts to the 4 wheels (4WD). The powerful steering servo with metal gears and an actuating force of 25kg always ensures maximum performance and a very direct steering response on any surface. The two shock towers, the wishbone brackets, steering arms and C-hubs as well as the chassis strut are CNC-machined from high-quality aluminium. The chassis plate is made of solid 4mm thick aluminium and ensures perfect rigidity of the chassis. Main gear and differential gears are made of steel and guarantee a long service life. All gearbox parts are CNC milled for maximum accuracy of fit. To prevent overheating, both the motor and the 150A brushless controller are equipped with fans to counteract the heat generated during operation. The mechanical brake of the model is controlled by a 15kg metal gear servo and this can be used in addition to the electric brake of the controller to bring the model into a perfect drift angle. For a very good balance of the vehicle and perfect grip level of the specially developed 165mm tyres provide in addition to the fully adjustable chassis, the massive oil pressure shock absorbers. The beautiful body of the model made of sturdy polycarbonate is also visually an absolute gem, which gives the model a very aggressive and off-road typical look. The RXB7 is equipped with an LED lighting system, which can not only be switched on and off via the transmitter, but also allows different lighting modes. A very brightly illuminated light bar on the roof of the buggy ensures perfect illumination of the track.HIGHLIGHTS:CNC-machined steel gears - For best performance, durability and power transmission, the HC7's gear parts are CNC-machined from high-strength steel.150A ESC - a custom-programmed brushless controller is used for smooth control of the 2000KV brushless motor.Complete servo controlled brake system (handbrake).FURTHER FEATURES:Solid, torsionally stiff 4mm aluminium chassis - for stable handlingCNC-machined aluminium front and rear shock towersDouble aluminium chassis bracingHigh-quality and hardened steel CVD drive shaftsAll gearbox parts are CNC-machined from high-quality steelSteering knuckles and steering arms made of milled aluminiumVehicle fully ball bearing mountedFront and rear suspension can be easily and precisely adjusted and optimised for different surfaces.Water-protected receiver boxTyres with perfect rubber compound for racing and driftingMachined aluminium wishbone brackets for maximum durabilityHigh-performance brushless motor with 2000KV and double fanHigh-power regulator with 150A and XT90 connector2x 3S LiPo battery with 5000mAh and XT90 connectorMetal gear servos for steering and handbrakeHigh-quality 4 channel 2.4GHz remote control with maximum range and sensitive controlTECHNICAL DATA:Scale: 1:7Length: 680mmWidth: 380mm Height: 225mmWeight: approx. 6,2kgWheelbase: 419mmTrack width front: 330mmTrack width rear: 320mmGround clearance: 55mmFront wheels: Outer diameter/width 165 / 63mmRear wheels: Outer diameter/width 165 / 63mmRim diameter: 90mmGearbox: SteelGear ratio: 15:1Front shocks: 102mmRear damper: 102mmBrake: electronic and brake disc via 15kg metal gear servo controlledESC: 150A ESC with XT90 connectorMotor: 4282 brushless motor with 2000KVDrive system: metal cardan shaftSteering servo: Standard servo with metal gearbox and 25kg actuating forceMain material: metalBattery compartment dimensions: 140 x 45 x 50mmBattery: 2x LiPo, 3S, 11,1V, 5000mAh 35C, Softcase XT90 connector LxWxH: 140x40x25mm Weight: 350gDriving time: approx. 10 - 15 minTop speed: up to max. 130km/h (with 2x 4S LiPo batteries optional) Remote control: 4 channel 2,4GHz remote controlRange: max. 400mCharger: BX3 Balancer charger 220VCharging time: approx. 3 - 4 hours per batterySCOPE OF DELIVERY:ModelTransmitter2x battery 3S LiPoChargerDecal sheetManual DE/ENREQUIRED ACCESSORIES:4x AA Batteries for Transmitter

Amewi Hyper GO Buggy brushless 3S 4WD 1:16 RTR blue The Hyper GO Buggy brushless 3S 4WD 1:16 RTR is a high-performance RC buggy that combines speed, precision, and fun in a compact format. Powered by a brushless motor, the buggy reaches speeds of up to 62 km/h, offering excellent traction and control on various terrains with its 4WD drivetrain. Main Features: Top Speed: Up to 62 km/h Drive: 4WD for optimal traction Motor: Brushless system for maximum performance Controller: 2.4 GHz interference-free Body: Durable and aerodynamic design in blue Technical Specifications: Scale: 1:16 Battery: 3S Li-Ion (included) Runtime: Up to 20 minutes Charging time: Approx. 120 minutes Recommended age: 14+

Team Corally SBX-425 Racing Buggy Kit – 1:10 4WD Off-Road Competition ModelThe Team Corally SBX-425 is an advanced 1:10 4WD racing buggy designed for serious RC enthusiasts and professional racers. Engineered in Olen, Belgium, the SBX-425 combines high-quality materials with cutting-edge technology to elevate precision, performance, and reliability.Main Features:Chassis: 7075 T6 hard-coated aluminum with carbon flex plates for maximum stiffness and agility.Shocks: Big-bore aluminum shocks with bleed caps for consistent damping.Differentials: Steel bevel gear differentials front and rear for proven strength and reliability.Suspension: Precision-optimized geometry for peak performance under all racing conditions.Flexibility: Adjustable suspension arms, steering setups, and optional rear shock positions for personalized tuning.Compatibility: Supports 2S LiPo shorty batteries with specially engineered tray for optimal weight distribution.Technical Specifications:Scale: 1:10Length: 410 mmHeight: 158 mmWheelbase: 287 mmFront Track: 248 mmRear Track: 244 mmGround Clearance: 40 mmWeight (without electronics): 900 gBattery Compartment (LxWxH): 47 x 95 x 25 mmShock Diameter: 14 mmFront Shock Length: 78.5 mmRear Shock Length: 90 mmIncluded:1x SBX-425 4WD Racing Buggy 1:10 Competition KitRequired to Complete:2-channel radio systemHigh-torque steering servoBrushless motorElectronic speed controller (ESC)48dp pinion gear (number of teeth depends on motor choice)2S 7.4V LiPo shorty battery & charger1:10 buggy front and rear tiresTools, paint for polycarbonate body, tire glueThe SBX-425 is not just a racing buggy; it's a platform designed to adapt, excel, and dominate on any track.

Team Corally SBX-825 7075 Edition 1/8 Racing Buggy KitDurable 7075 aluminum chassis for maximum rigidity and strength1/8 competition buggy kit – precision parts for ambitious racersReinforced arms and heavy-duty suspension for toughest track conditionsOptimized geometry for excellent cornering and jump controlComplete kit for self-assembly – choose your own motor and electronics setup

Ultimate Bashing with the SPARK XB-6The Team Corally SPARK XB-6 is the first true 1:8 buggy designed specifically for bashing. With high-quality craftsmanship and powerful technology, it conquers any terrain.Main Features:Team Corally Torox 185A 4-6S ESC with LiPo protectionTeam Corally Kuron 2050kV 4-pole brushless motorHV-7225 metal gear steering servo with 25 kg torqueOil-filled 16 mm aluminum big bore shocks3 sealed metal differentials with silicone oilReinforced 3 mm aluminum chassis with central reinforcementIndependent front pivot ball and rear double wishbone suspensionAvailable in green, blue, and red colorsExperience unmatched performance and durability with the SPARK XB-6 – ready for any adventure.

Ultimate Bashing with the SPARK XB-6The Team Corally SPARK XB-6 is the first true 1:8 buggy designed specifically for bashing. With high-quality craftsmanship and powerful technology, it conquers any terrain.Main Features:Team Corally Torox 185A 4-6S ESC with LiPo protectionTeam Corally Kuron 2050kV 4-pole brushless motorHV-7225 metal gear steering servo with 25 kg torqueOil-filled 16 mm aluminum big bore shocks3 sealed metal differentials with silicone oilReinforced 3 mm aluminum chassis with central reinforcementIndependent front pivot ball and rear double wishbone suspensionAvailable in green, blue, and red colorsExperience unmatched performance and durability with the SPARK XB-6 – ready for any adventure.

Team Corally 1:8 Syncro-4 RTR Brushless Buggy 3-4S blue Model: Team Corally Syncro-4 Color: Green Scale: 1:8 Drive Type: 4WD (All-wheel drive) Motor: Kuron 725, 2150kV, 4-pole sensorless brushless motor ESC: Torox 135, compatible with 3-4S LiPo batteries Servo: CRHV-7225 high-speed digital servo with metal gears, 25 kg torque Remote Control: CT2S 2.4 GHz transmitter with 50%/100% power switch Dimensions Length: 515 mm Width: 308 mm Height: 185 mm Wheelbase: 327 mm Weight (without battery): approx. 3,400 g Special Features Speed up to 80 km/h Water and dustproof electronics XL battery compartment Package Contents Ready-to-run buggy 2.4 GHz transmitter

Team Corally 1:8 Syncro-4 RTR Brushless Buggy 3-4S green Model: Team Corally Syncro-4 Color: Green Scale: 1:8 Drive Type: 4WD (All-wheel drive) Motor: Kuron 725, 2150kV, 4-pole sensorless brushless motor ESC: Torox 135, compatible with 3-4S LiPo batteries Servo: CRHV-7225 high-speed digital servo with metal gears, 25 kg torque Remote Control: CT2S 2.4 GHz transmitter with 50%/100% power switch Dimensions Length: 515 mm Width: 308 mm Height: 185 mm Wheelbase: 327 mm Weight (without battery): approx. 3,400 g Special Features Speed up to 80 km/h Water and dustproof electronics XL battery compartment Package Contents Ready-to-run buggy 2.4 GHz transmitter

Team Corally 1:8 Syncro-4 RTR Brushless Buggy 3-4S orange Model: Team Corally Syncro-4 Color: Green Scale: 1:8 Drive Type: 4WD (All-wheel drive) Motor: Kuron 725, 2150kV, 4-pole sensorless brushless motor ESC: Torox 135, compatible with 3-4S LiPo batteries Servo: CRHV-7225 high-speed digital servo with metal gears, 25 kg torque Remote Control: CT2S 2.4 GHz transmitter with 50%/100% power switch Dimensions Length: 515 mm Width: 308 mm Height: 185 mm Wheelbase: 327 mm Weight (without battery): approx. 3,400 g Special Features Speed up to 80 km/h Water and dustproof electronics XL battery compartment Package Contents Ready-to-run buggy 2.4 GHz transmitter

Team Corally 1:8 Syncro-4 RTR Brushless Buggy 3-4S green Model: Team Corally Syncro-4 Color: Green Scale: 1:8 Drive Type: 4WD (All-wheel drive) Motor: Kuron 725, 2150kV, 4-pole sensorless brushless motor ESC: Torox 135, compatible with 3-4S LiPo batteries Servo: CRHV-7225 high-speed digital servo with metal gears, 25 kg torque Remote Control: CT2S 2.4 GHz transmitter with 50%/100% power switch Dimensions Length: 515 mm Width: 308 mm Height: 185 mm Wheelbase: 327 mm Weight (without battery): approx. 3,400 g Special Features Speed up to 80 km/h Water and dustproof electronics XL battery compartment Package Contents Ready-to-run buggy 2.4 GHz transmitter

Asuga XLR - RTRIntroducing the all-new, extra-large Asuga XLR 6S RTR Buggy from Team Corally. This unique vehicle is 15% larger than traditional 1/8 buggies and delivers a driving experience like no other car available today! Developed with a laser-focus on the smallest of details, the Asuga XLR is precision-engineered to satisfy its owners with the fastest, most durable, and best-handling RC buggy ever produced. As an added bonus, the Asuga XLR RTR is available in three body color choices. Isn't it time your bashing program went big?Bigger is better!Larger in size than other models, the Asuga XLR delivers increased ground clearance, massive suspension travel and oversized components on a completely new chassis that uses the proven, durable, and 6S-capable drive train system that Team Corally 1/8 scale models have been noted for. When exploring just a few of the details that make the Asuga XLR unique, it becomes evident that this is no ordinary buggy:-70% parts compatibility with existing Team Corally 1/8 scale models-Massive, 3mm thick aluminum main chassis plate with protective side guards-Ultra rigid hybrid central chassis brace system-CNC-machined adjustable aluminum motor mount with aluminum and steel center diff assembly-Massive 16mm big bore, threaded aluminum, oil-filled shocks with hard springs, heavy-duty 4mm tuned pistons, and oversized lower shock ends.-5mm thick, CNC-machined aluminum front and rear shock towers-Massive heavy-duty composite suspension arms, with aluminum hinge pin and pivot ball retainers for impressive durability. The front upper arms feature a unique aero control kit for additional downforce and improved steering response. -Extreme 8mm-thick aluminum suspension pin holders secured by eight 4mm mounting screws include adjustable composite toe-in blocks.-Large, heavy duty composite steering blocks with new pillow ball securement features-Oversized composite rear hubs-Durable composite steering and upper-camber links-Three fluid-filled precision differentials with CNC spiral-cut metal input and main gears -Durable, hardened S2 steel drive joints and axles-Rubber sealed ABEC-3 ball bearings-Chassis skid plates with integrated modern front bumper-Low-profile 130mm Sprint RXA high-grip tires designed for 6S power-Reliable CT2R pistol grip 2.4 GHz transmitter and receiver with digital trims, steering dual rate, and servo reversing-Powerful Kuron 825 4-pole, 2050kv sensorless brushless motor-Smooth and reliable 6S-capable Torox 185 ESC with LVC and user-adjustable BEC and profile settingsLarger than in size than other models with additional ground clearance, massive suspension travel, and oversized components, the Asuga XLR is a completely new chassis that employ the proven drive components of existing Team Corally 6S-powered models. The impressive size of the Asuga XLR delivers razor-sharp handling, amazing acceleration, top-speed, and unsurpassed durability. Reset your expectations and go big with Team Corally's Asuga XLR RTR.Size:Length: 574 mmWidth: 359 mmHeight: 192 mmWheel base: 371 mmWeight: 4450 gMax. possible Speed: 110+ km/hadditionally required:4x Mignon batteries4S or 6S Lipo with XT90Charger

Asuga XLR - RTRIntroducing the all-new, extra-large Asuga XLR 6S RTR Buggy from Team Corally. This unique vehicle is 15% larger than traditional 1/8 buggies and delivers a driving experience like no other car available today! Developed with a laser-focus on the smallest of details, the Asuga XLR is precision-engineered to satisfy its owners with the fastest, most durable, and best-handling RC buggy ever produced. As an added bonus, the Asuga XLR RTR is available in three body color choices. Isn't it time your bashing program went big?Bigger is better!Larger in size than other models, the Asuga XLR delivers increased ground clearance, massive suspension travel and oversized components on a completely new chassis that uses the proven, durable, and 6S-capable drive train system that Team Corally 1/8 scale models have been noted for. When exploring just a few of the details that make the Asuga XLR unique, it becomes evident that this is no ordinary buggy:-70% parts compatibility with existing Team Corally 1/8 scale models-Massive, 3mm thick aluminum main chassis plate with protective side guards-Ultra rigid hybrid central chassis brace system-CNC-machined adjustable aluminum motor mount with aluminum and steel center diff assembly-Massive 16mm big bore, threaded aluminum, oil-filled shocks with hard springs, heavy-duty 4mm tuned pistons, and oversized lower shock ends.-5mm thick, CNC-machined aluminum front and rear shock towers-Massive heavy-duty composite suspension arms, with aluminum hinge pin and pivot ball retainers for impressive durability. The front upper arms feature a unique aero control kit for additional downforce and improved steering response. -Extreme 8mm-thick aluminum suspension pin holders secured by eight 4mm mounting screws include adjustable composite toe-in blocks.-Large, heavy duty composite steering blocks with new pillow ball securement features-Oversized composite rear hubs-Durable composite steering and upper-camber links-Three fluid-filled precision differentials with CNC spiral-cut metal input and main gears -Durable, hardened S2 steel drive joints and axles-Rubber sealed ABEC-3 ball bearings-Chassis skid plates with integrated modern front bumper-Low-profile 130mm Sprint RXA high-grip tires designed for 6S power-Reliable CT2R pistol grip 2.4 GHz transmitter and receiver with digital trims, steering dual rate, and servo reversing-Powerful Kuron 825 4-pole, 2050kv sensorless brushless motor-Smooth and reliable 6S-capable Torox 185 ESC with LVC and user-adjustable BEC and profile settingsLarger than in size than other models with additional ground clearance, massive suspension travel, and oversized components, the Asuga XLR is a completely new chassis that employ the proven drive components of existing Team Corally 6S-powered models. The impressive size of the Asuga XLR delivers razor-sharp handling, amazing acceleration, top-speed, and unsurpassed durability. Reset your expectations and go big with Team Corally's Asuga XLR RTR.Size:Length: 574 mmWidth: 359 mmHeight: 192 mmWheel base: 371 mmWeight: 4450 gMax. possible Speed: 110+ km/hadditionally required:4x Mignon batteries4S or 6S Lipo with XT90Charger

Asuga XLR - RTRIntroducing the all-new, extra-large Asuga XLR 6S RTR Buggy from Team Corally. This unique vehicle is 15% larger than traditional 1/8 buggies and delivers a driving experience like no other car available today! Developed with a laser-focus on the smallest of details, the Asuga XLR is precision-engineered to satisfy its owners with the fastest, most durable, and best-handling RC buggy ever produced. As an added bonus, the Asuga XLR RTR is available in three body color choices. Isn't it time your bashing program went big?Bigger is better!Larger in size than other models, the Asuga XLR delivers increased ground clearance, massive suspension travel and oversized components on a completely new chassis that uses the proven, durable, and 6S-capable drive train system that Team Corally 1/8 scale models have been noted for. When exploring just a few of the details that make the Asuga XLR unique, it becomes evident that this is no ordinary buggy:-70% parts compatibility with existing Team Corally 1/8 scale models-Massive, 3mm thick aluminum main chassis plate with protective side guards-Ultra rigid hybrid central chassis brace system-CNC-machined adjustable aluminum motor mount with aluminum and steel center diff assembly-Massive 16mm big bore, threaded aluminum, oil-filled shocks with hard springs, heavy-duty 4mm tuned pistons, and oversized lower shock ends.-5mm thick, CNC-machined aluminum front and rear shock towers-Massive heavy-duty composite suspension arms, with aluminum hinge pin and pivot ball retainers for impressive durability. The front upper arms feature a unique aero control kit for additional downforce and improved steering response. -Extreme 8mm-thick aluminum suspension pin holders secured by eight 4mm mounting screws include adjustable composite toe-in blocks.-Large, heavy duty composite steering blocks with new pillow ball securement features-Oversized composite rear hubs-Durable composite steering and upper-camber links-Three fluid-filled precision differentials with CNC spiral-cut metal input and main gears -Durable, hardened S2 steel drive joints and axles-Rubber sealed ABEC-3 ball bearings-Chassis skid plates with integrated modern front bumper-Low-profile 130mm Sprint RXA high-grip tires designed for 6S power-Reliable CT2R pistol grip 2.4 GHz transmitter and receiver with digital trims, steering dual rate, and servo reversing-Powerful Kuron 825 4-pole, 2050kv sensorless brushless motor-Smooth and reliable 6S-capable Torox 185 ESC with LVC and user-adjustable BEC and profile settingsLarger than in size than other models with additional ground clearance, massive suspension travel, and oversized components, the Asuga XLR is a completely new chassis that employ the proven drive components of existing Team Corally 6S-powered models. The impressive size of the Asuga XLR delivers razor-sharp handling, amazing acceleration, top-speed, and unsurpassed durability. Reset your expectations and go big with Team Corally's Asuga XLR RTR.Size:Length: 574 mmWidth: 359 mmHeight: 192 mmWheel base: 371 mmWeight: 4450 gMax. possible Speed: 110+ km/hadditionally required:4x Mignon batteries4S or 6S Lipo with XT90Charger

ASUGA XLR - ROLLERIntroducing the all-new, extra-large Asuga XLR 6S Buggy from Team Corally. This unique vehicle, offered in rolling chassis form, is 15% larger than traditional 1/8 buggies and delivers a driving experience like no other car available today! Developed with a laser-focus on the smallest of details, the Asuga XLR is precision-engineered to satisfy its owners with the fastest, most durable, and best-handling RC buggy ever produced. The rolling chassis format provides an assembled vehicle awaiting your choice of motor, ESC, steering servo, and radio. As an added bonus toward personalization, the Asuga XLR is available in three body color choices. Isn't it time your bashing program went big?Bigger is better!Larger in size than other models, the Asuga XLR delivers increased ground clearance, massive suspension travel and oversized components on a completely new chassis that uses the proven, durable, and 6S-capable drive train system that Team Corally 1/8 scale models have been noted for. When exploring just a few of the details that make the Asuga XLR unique, it becomes evident that this is no ordinary buggy:-70% parts compatibility with existing Team Corally 1/8 scale models-Massive, 3mm thick aluminum main chassis plate with protective side guards-Ultra rigid hybrid central chassis brace system-CNC-machined adjustable aluminum motor mount with aluminum and steel center diff assembly-Massive 16mm big bore, threaded aluminum, oil-filled shocks with hard springs, heavy-duty 4mm tuned pistons, and oversized lower shock ends.-5mm thick, CNC-machined aluminum front and rear shock towers-Massive heavy-duty composite suspension arms, with aluminum hinge pin and pivot ball retainers for impressive durability. The front upper arms feature a unique aero control kit for additional downforce and improved steering response. -Extreme 8mm-thick aluminum suspension pin holders secured by eight 4mm mounting screws include adjustable composite toe-in blocks-Large, heavy duty composite steering blocks with new pillow ball securement features-Oversized composite rear hubs-Durable composite steering and upper-camber links-Three fluid-filled precision differentials with CNC spiral-cut metal input and main gears -Durable, hardened S2 steel drive joints and axles-Rubber sealed ABEC-3 ball bearings-Chassis skid plates with integrated modern front bumper-Low-profile 130mm Sprint RXA high-grip tires designed for 6S power-Large, convenient battery tray allows use of a wide range of LiPo pack configurationsLarger than in size than other models with additional ground clearance, massive suspension travel, and oversized components, the Asuga XLR is a completely new chassis that employ the proven drive components of existing Team Corally 6S-powered models. The impressive size of the Asuga XLR delivers razor-sharp handling, amazing acceleration, top-speed, and unsurpassed durability. Reset your expectations and go big with Team Corally's Asuga XLR!Size:Length: 574 mmWidth: 359 mmHeight: 192 mmWheel base: 371 mmWeight: 4450 gadditionally required:Radio SetBrushless Combo4S or 6S Lipo with XT90Charger

ASUGA XLR - ROLLERIntroducing the all-new, extra-large Asuga XLR 6S Buggy from Team Corally. This unique vehicle, offered in rolling chassis form, is 15% larger than traditional 1/8 buggies and delivers a driving experience like no other car available today! Developed with a laser-focus on the smallest of details, the Asuga XLR is precision-engineered to satisfy its owners with the fastest, most durable, and best-handling RC buggy ever produced. The rolling chassis format provides an assembled vehicle awaiting your choice of motor, ESC, steering servo, and radio. As an added bonus toward personalization, the Asuga XLR is available in three body color choices. Isn't it time your bashing program went big?Bigger is better!Larger in size than other models, the Asuga XLR delivers increased ground clearance, massive suspension travel and oversized components on a completely new chassis that uses the proven, durable, and 6S-capable drive train system that Team Corally 1/8 scale models have been noted for. When exploring just a few of the details that make the Asuga XLR unique, it becomes evident that this is no ordinary buggy:-70% parts compatibility with existing Team Corally 1/8 scale models-Massive, 3mm thick aluminum main chassis plate with protective side guards-Ultra rigid hybrid central chassis brace system-CNC-machined adjustable aluminum motor mount with aluminum and steel center diff assembly-Massive 16mm big bore, threaded aluminum, oil-filled shocks with hard springs, heavy-duty 4mm tuned pistons, and oversized lower shock ends.-5mm thick, CNC-machined aluminum front and rear shock towers-Massive heavy-duty composite suspension arms, with aluminum hinge pin and pivot ball retainers for impressive durability. The front upper arms feature a unique aero control kit for additional downforce and improved steering response. -Extreme 8mm-thick aluminum suspension pin holders secured by eight 4mm mounting screws include adjustable composite toe-in blocks-Large, heavy duty composite steering blocks with new pillow ball securement features-Oversized composite rear hubs-Durable composite steering and upper-camber links-Three fluid-filled precision differentials with CNC spiral-cut metal input and main gears -Durable, hardened S2 steel drive joints and axles-Rubber sealed ABEC-3 ball bearings-Chassis skid plates with integrated modern front bumper-Low-profile 130mm Sprint RXA high-grip tires designed for 6S power-Large, convenient battery tray allows use of a wide range of LiPo pack configurationsLarger than in size than other models with additional ground clearance, massive suspension travel, and oversized components, the Asuga XLR is a completely new chassis that employ the proven drive components of existing Team Corally 6S-powered models. The impressive size of the Asuga XLR delivers razor-sharp handling, amazing acceleration, top-speed, and unsurpassed durability. Reset your expectations and go big with Team Corally's Asuga XLR!Size:Length: 574 mmWidth: 359 mmHeight: 192 mmWheel base: 371 mmWeight: 4450 gadditionally required:Radio SetBrushless Combo4S or 6S Lipo with XT90Charger

ASUGA XLR - ROLLERIntroducing the all-new, extra-large Asuga XLR 6S Buggy from Team Corally. This unique vehicle, offered in rolling chassis form, is 15% larger than traditional 1/8 buggies and delivers a driving experience like no other car available today! Developed with a laser-focus on the smallest of details, the Asuga XLR is precision-engineered to satisfy its owners with the fastest, most durable, and best-handling RC buggy ever produced. The rolling chassis format provides an assembled vehicle awaiting your choice of motor, ESC, steering servo, and radio. As an added bonus toward personalization, the Asuga XLR is available in three body color choices. Isn't it time your bashing program went big?Bigger is better!Larger in size than other models, the Asuga XLR delivers increased ground clearance, massive suspension travel and oversized components on a completely new chassis that uses the proven, durable, and 6S-capable drive train system that Team Corally 1/8 scale models have been noted for. When exploring just a few of the details that make the Asuga XLR unique, it becomes evident that this is no ordinary buggy:-70% parts compatibility with existing Team Corally 1/8 scale models-Massive, 3mm thick aluminum main chassis plate with protective side guards-Ultra rigid hybrid central chassis brace system-CNC-machined adjustable aluminum motor mount with aluminum and steel center diff assembly-Massive 16mm big bore, threaded aluminum, oil-filled shocks with hard springs, heavy-duty 4mm tuned pistons, and oversized lower shock ends.-5mm thick, CNC-machined aluminum front and rear shock towers-Massive heavy-duty composite suspension arms, with aluminum hinge pin and pivot ball retainers for impressive durability. The front upper arms feature a unique aero control kit for additional downforce and improved steering response. -Extreme 8mm-thick aluminum suspension pin holders secured by eight 4mm mounting screws include adjustable composite toe-in blocks-Large, heavy duty composite steering blocks with new pillow ball securement features-Oversized composite rear hubs-Durable composite steering and upper-camber links-Three fluid-filled precision differentials with CNC spiral-cut metal input and main gears -Durable, hardened S2 steel drive joints and axles-Rubber sealed ABEC-3 ball bearings-Chassis skid plates with integrated modern front bumper-Low-profile 130mm Sprint RXA high-grip tires designed for 6S power-Large, convenient battery tray allows use of a wide range of LiPo pack configurationsLarger than in size than other models with additional ground clearance, massive suspension travel, and oversized components, the Asuga XLR is a completely new chassis that employ the proven drive components of existing Team Corally 6S-powered models. The impressive size of the Asuga XLR delivers razor-sharp handling, amazing acceleration, top-speed, and unsurpassed durability. Reset your expectations and go big with Team Corally's Asuga XLR!Size:Length: 574 mmWidth: 359 mmHeight: 192 mmWheel base: 371 mmWeight: 4450 gadditionally required:Radio SetBrushless Combo4S or 6S Lipo with XT90Charger

BL06 ... the "big brother" of the Z-06 buggy with BRUSHLESS power. Like its little brother (Z-06), the BL06 brushless buggy is equipped with every conceivable tuning part "out of the box". Aluminium oil-pressure shock absorbers, metal drive shafts, metal CVD cardans at the front, aluminium wishbone mounts and shock towers, metal right/left threaded rods, special servo saver, encapsulated gearbox and a metal chassis leave no tuning wishes unfulfilled! The BL06 is a 4WD buggy with a 4300KV brushless motor powered by a 7.4 volt LiPo battery. Top speeds of up to 80 km/h are possible. The new Grip tyres on disc rims bring the power to the road and off-road.By means of the Dual-Rate, the maximum speed can be continuously reduced via remote control (maximum speed 0 - 100 % adjustable!).Thus, the model is also suitable for beginners to enter the RC sport!Technical data:Scale: 1:14Drive: 4WD brushlessMotor: Brushless 2845 - 4300kvlength: 310 mmWidth: 205 mmHeight: 120 mmWheelbase: 186 mmSpeed: up to 80 km/hTyres: 73x27/31 mmWeight: approx. 1000 gScope of delivery:RC buggy RTR2.4 GHz remote controlLiPo drive battery - 7.4 Volt - 1500 mAhUSB charging cableManual (D, ENG, ES, IT, FR)

The Z06 XL is the new power buggy in the Advanced Line from DF Models on a scale of 1:12. The model comes ready to drive (RTR) with remote control, battery (LiPo Power) and charger (USB charging cable). The Z06 XL is a 4WD buggy with a power motor and 60 ampere controller unit, which is powered by a 7.4 volt LiPo battery. Top speeds of up to 60 km/h are therefore possible. Like its brother (Z-06), the buggy is equipped with every conceivable tuning part "out of the box". Aluminum oil pressure shock absorbers, metal drive shafts, metal CVD cardans at the front, aluminum wishbone brackets and front bumpers, metal right/left threaded rods (steering), special servo saver, encapsulated gearbox and a honeycomb chassis (enormous strength and torsional rigidity) leave no tuning wishes unfulfilled! The 7.4 volt LiPo system battery fits perfectly into the model's holder. Reverse polarity of the battery when connecting is therefore impossible. Alternatively, other batteries (7.4 Volt LiPo batteries) can of course be installed.The super-grip tires on disc rims bring the power to the road and off-road.Using the dual rate, the maximum speed can be continuously reduced by remote control (maximum speed 0 - 100 % adjustable!). This means that the model is also suitable for beginners to get into RC sport!The remote control offers another highlight ... it has an integrated cell phone holder. You can attach your smartphone to the remote control and thus have the option of filming action videos yourself, for example; no 3rd hand or 2nd person required for filming, you can concentrate fully on controlling your model.Scope of delivery:RC-Buggy RTR2.4 GHz remote controlLiPo drive battery - 7.4 Volt - 1300 mAhUSB charging cableManualTechnical data:Scale: 1:12Drive: 4WD brushedLength: 347 mmWidth: 210 mmHeight: 125 mmWheelbase: 227 mmSpeed: up to 60 km/h possible

Z06 Light Buggy 1:14 RTR – Your Entry into RC Model BuildingExperience the thrill of remote-controlled driving with the Z06 Light Buggy in 1:14 scale from DF Models. This model offers an impressive combination of speed, stability, and user-friendliness.Main Features:Powerful 4WD Drive: Equipped with a powerful motor and all-wheel drive, the buggy reaches speeds of up to 40 km/h.Dual-Rate Function: The stepless speed control via the remote allows adjustment of the maximum speed from 0 to 100%, ideal for beginners and advanced users.Ultra-Grip Tires: Specially designed tires provide excellent traction on various surfaces, whether on the road or off-road.Robust Carbon-Look Chassis: The sturdy and visually appealing chassis ensures durability and resilience.Technical Data:Scale: 1:14Drive: 4WD brushedLength: 310 mmWidth: 205 mmHeight: 120 mmWheelbase: 186 mmSpeed: up to 40 km/hTire Size: 73x27/31 mmWeight: approx. 1000 gScope of Delivery:RC Buggy RTR2.4 GHz Remote ControlLi-Ion Drive Battery – 7.4 Volt – 1500 mAhUSB Charging CableManualRequired Accessories:4x AA BatteriesUSB Power Adapter (minimum 10 watts)The Z06 Light Buggy offers excellent value for money and is the perfect entry into the world of RC model building.