Truggy – Electric RC Off-Road Racers

The new 80A brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully utilise the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item no. 2110061) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 540 15T brushed motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. Thanks to the higher output of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - regardless of the C-rate and capacity. 4 oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun is guaranteed. A servo with 15kg actuating force and metal gearing handles the steering commands.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that settings can be made easily using levers and rotary knobs. In addition, the remote control has a "beginner mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have much experience in handling such RC vehicles.Highlights:4WD all-wheel drive2.4 GHz 4-channel radio system80A brushed speed controller with T-plug540 15T motor with 32,000 rpm @ 7.4V15kg steering servo with metal gears (25T, ball bearings)4 oil shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outputsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish truggy body with plastic add-on parts"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:Scale 1:10Dimensions (L/W/H): 405x325x165 mmWeight: 1740gWheelbase: 270mmGround clearance: approx. 35mmTrack width: 270mm front/rearWheels front/rear: Durchmesser: 105mm / width: 55mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmEngine gear ratio: Pinion: 18T / main gear: 64T (module 0.6) Scope of delivery:1/10 Truggy "AT3.4V2" RTR2.4GHz "CR4S" remote controlSticker sheetinstruction manualadditionally required:4x AA batteries for remote control7.2V NiMH or 7.4V* LiPo drive battery (*recommended)Charger (suitable for the drive battery)Programming card for individual settings of the speed controller

Powerful 1:10 EP Truggy AT3.4-V2 KIT 4WDThe Absima 1:10 EP Truggy "AT3.4-V2 KIT" is a high-quality, electric-powered truggy in 1:10 scale. This 4WD kit provides an excellent foundation for off-road enthusiasts who value performance and quality.Main Features:Robust 4WD drive system for optimal traction on various terrainsHigh-quality materials and precise craftsmanship for durabilityCustomizable components for individual settings and upgradesIdeal for competitions and recreational off-road drivingThe AT3.4-V2 KIT offers a solid foundation for those seeking a reliable and high-performance RC vehicle.

The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-plug. To fully utilise the potential of the vehicle, we recommend a 2S/7.4V LiPo battery for operation. In addition, a separately available programming box (item no. 2110062) can be used to set various parameters such as braking force, punch, low-voltage protection and much more.The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 6kg servo handles the steering commands. The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle enormously. Handling also becomes almost impossible due to the enormous over-motorisation. We therefore generally advise against 3S operation. 4 adjustable aluminium oil-pressure shock absorbers offer ideal handling, making driving a lot of fun. The spring preload can be adjusted using a knurled screw. This allows the suspension to be perfectly customised to your needs.Lightweight and compact design, as well as a comfortable and ergonomic shape - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that the settings can be easily adjusted using levers Highlights:4WD all-wheel drive2.4 GHz 4-channel remote control system60A brushless speed controller (waterproof; T-plug; programmable)3421KV brushless motor (sensorless; splash-proof)15kg steering servo with metal gears (25T, ball bearings)4 aluminium oil pressure shock absorbersBall bearing main driveExtremely durable composite plastic partsSteel differential outletsAluminium main drive shaft with steel mountsAdjustable upper tie rods5mm aluminium motor mounts6mm shock towers2 differentials (front/rear)Stylish truggy body with plastic add-on parts"Light-Weight" chassis (less weight - longer driving time)Many aluminium tuning parts availableTechnical data:Scale 1:10Dimensions (L/W/H): 405x325x165 mmWeight: 1780gWheelbase: 270mmGround clearance: approx. 35mmTrack width: 270mm front/rearWheels front/rear: Durchmesser: 105mm / width: 55mmShock absorber oil: 400CPSInstallation length of the shock absorbers: 90mmEngine gear ratio: pinion: 23T / main gear: 64T (module 0.6) Scope of delivery:1/10 Brushless Truggy "AT3.4BLV2" RTR2.4GHz "CR4S" remote controlSticker sheetinstruction manualadditionally required:4x AA batteries for remote control7.4V/2S* LiPo drive battery (*recommended)Charger for LiPo batteriesProgramming box for individual settings on the speed controller

Discover the RC model sport with the "First Step Performance" from Absima. Up to 36 KM/H and power to the max you will get with this awesome model. Of course you will be supported by real RC technique. A safe 2.4 GHz remote control system supports the electronic speed controller to release the power at your command. This RC buggy is made of high quality and strong material with capacity in anti-collision and beat resistance. With soft hollow rubber tires and professional shock absorbing system features great performance. Take the first step into the world of RC modelsport with this ready-to-run set!Enjoying real RC racing with the 1/14 4WD RC car, you can get started quickly and handle it like a pro. Competing with other advanced RC car lovers and enjoying the exciting racing on the street, in your backyard or in the woods!.HIGHLIGHTS:Water-resistant electronicIncl. car batteries and USB charging cable Speed up to 36 KM/HAll spare parts availableNice handling - perfect fro beginnersGENERAL CHASSIS FEATURES: 1/14th Scale4WDCompletely ball bearing mounted2.2kg Steering ServoFront & rear differentialsComplete covered transmission Gears made from extreme durable nylon materialPinion made from copper Independent suspension systemHigh performance 390 Motor and speed controllerFront CVD drive shafts Range aprox. 60mDrive time: aprox. 16 MinutesAluminum cardan shafts Adjustable speed via remote controlOverheat protection Incl. 2.4GHz radio systemNice detailed body designOvercharge & Over-discharge Protection 2x 3.7V 1500mAh Li-Ion Car Battery"Saddle Pack" battery layout for a perfect weight distribution TECHNICAL SPECIFICATION:Car size: (L/W/H): 292 x 210 x 126 mmWeight: 795g (w/o batteries)Wheelbase: 190 mmChassis Clearance: 35 mmTire Width: 40 mmWheel Durchmesser: : ± 80 mmShock Oil Viscosity : n.a.Shock Spring Force: MediumShock Instalation Length: 65 mm front/rearSCOPE OF DELIVERY: 1/14th RC Car 2.4 GHz Radio System 2x Li-Ion 3.7V 1500mAh Car BatteriesUSB Charging CableManualREQUIRED ACCESSORIES:3 AA Cells for Radio

Highlights:Splash-proof Includes rechargeable battery and USB charging cable LED headlight included Original spare parts available Features:4WD all-wheel driveFully ball-bearing mounted2 differentials High-current plug (T-plug) High-performance motor and 40A speed controllerCVD drive shafts (front)Radio range approx. 60m Travel time with full battery: +/20 minutesAluminum gimbal driveAdjustable speed on the transmitterOverheating protectionLED front lighting included2.4 GHz remote control system includedBodywork with sticker sheet to design yourself Technical data:Dimensions (L/W/H): 270 x 215 x 125 mmWeight: 710 gWheelbase: 175 mmGround clearance: 45 mmTrack width: 175 mm front / 175 mm rearTires: Monster Rubber / 5 double-spoke rimWheels front/rear: 40 mm width / Durchmesser: ± 80 mmIncluded are: Mini AT Monster Truggy2.4 GHz remote control system7.4V Li-Ion battery 1500mAhUSB charging cableWheelie barAdditionally required:3x AA batteries for the remote control

The new mini models from DF Models on a scale of 1:16. Whether it's a nippy truggy or a beefy truck, there's something here for every taste. The models come ready to drive (RTR) with 2.4 GHz remote control, LiPo power battery and charger (USB charging cable). The models with power motor and powerful controller unit are fuelled by a 7.4 volt LiPo battery. Top speeds of up to 45 km/h are therefore possible. Thanks to the 4 WD drive in conjunction with a chassis and suspension perfectly matched to the models, the "mini models" are in almost no way inferior to the big ones. The body is equipped with a folding mechanism so that only one body pin needs to be removed to access the battery or the chassis of the models. LED lighting in the bumpers (front/rear) make driving at dusk or in the dark a visual experience. Sophisticated technology, enormous performance at a favourable entry-level price! The maximum speed can be reduced by remote control using a switch function on the remote control (maximum speed 100 - 75 - 50 % adjustable!). This makes the model ideal for beginners to get into RC sport! Scope of delivery: RC-Car RTR 2.4 GHz remote control LiPo drive battery - 7.4 Volt - 1800 mAh USB charging cable Instruction manual Technical data: Scale: 1:16 Drive: 4WD brushed Length: 265 mm Width: 210 mm Height: 110 mm Wheelbase: 180 mm Tyres: 70*36 mm Weight: approx. 850 g

1:10XL Line V2 ... sets new standards!The new Z-10 models of the 1:10XL V2 Line from DF Models have been developed over countless days, weeks and months from the experience gained from the 10,000 tried and tested 1:10XL Line models and set new standards that have probably never been seen before at such a price! The plastic quality has been catapulted to a new level, the electronics have been redeveloped and significantly upgraded. These now include a 120 amp brushless controller, 15 KG XXL steel gear servo and a remote control that allows a maximum speed to be selected (100-75-50 %). Features such as 4WD drive, robust steel differentials, XXL oil pressure shock absorbers, 17mm wheel drivers, wheelie bar and a chassis with very high side panels (so less dirt can get into the model) are standard on our model! The Z-10 BL (brushless) models can be operated with a 2, 3 or 4S LiPo battery (not included). In 4S mode, the wheelie bar already fitted is absolutely essential to prevent the model from rolling over and to bring the power to the ground. Such brute power at this price-performance ratio has never been seen before! The models are powered by a powerful brushless motor, the brand new, high-quality DF Models DF-120BL brushless controller (programmable via Bluetooth module, optionally available no. 1240) with 120 amps of power, allowing the model to accelerate up to 80 km/h. The DF-1500D 15 kg steering servo with XXL steel gearbox provides sufficient power in every situation.The maximum speed can be reduced by remote control using a switch function on the remote control (maximum speed 100 - 75 - 50 % adjustable!). This makes the model ideal for beginners to get into RC sport!Scope of delivery:RC truggy2.4 GHz remote controlInstruction manualTechnical data:Scale: 1:10XLDrive: 4WD brushlessLength: 500 mmWidth: 360 mmHeight: 230 mmWheelbase: 300 mmSpeed: up to 80 km/h possible

1/8th Scale 4WD Electric Truggy with FLUX Brushless System, 2.4GHz Radio System and Painted BodyFactory-assembled & pre-painted 4WD 1/8 scale CarPre-painted body with awesome speed graphicsPre-mounted all-terrain tiresHigh torque IP67 rated waterproof servo6S LiPo CapableMLH-2200 2200KV brushless motor with 5mm shaftWaterproof 150A ELH-6S speed controllerLiPo ready adjustable battery tray with secure hook-and-loop strapsAluminum heatsink motor mount help the motor stay cool with optional fan mounting pointsFull-time 4WD for excellent controlEfficient and tough shaft drivetrain with front universalsAluminum 16mm Big Bore oil-filled shocks for confident control7075 Aluminum shock towers front and rear7075 suspension blocks front and rearThick steel turnbucklesFront and rear sway bars for excellent handlingHardened steel spur and pinion gear for extreme durabilitySpiral-cut bevel gears for the best balance of strength and efficiencyTough oil-filled 4-gear differentialsSuspension based on World Championship pedigreeSuper low CoG for superior handlingTotal adjustability: roll centre, wheelbase, camber, sway bar and moreNylon stone and dirt guards keep rocks out of the chassisDual bellcrank steeringCam type servo saverAll hex head hardwareFull set of rubber-sealed ball bearings2.4GHz Radio Set with waterproof receiverSPECIFICATIONS:Length: 580mm Width: 408mm Height: 200mmWheelbase: 375mmDrivetrain: Shaft 4WDWHAT YOU NEED:4S or 6S Lipo with Deans PlugCharger4 AA Batteries for TransmitterWHAT YOU NEED:4S or 6S Lipo with Deans PlugCharger4 AA Batteries for Transmitter

TRAXXAS SLEDGE 1/8 Brushless Monster Truck 4x4With the SLEDGE, TRAXXAS completely redefines the 1/8 offroad class and raises it to a new level."SLEDGE - DOMINANCE in 1/8 Offroad NEWLY DEFINED”With the SLEDGE, TRAXXAS delivers a model with superior performance, significantly improved durability and first-class quality that the enthusiastic off-road driver longs for.Countless hours of development and testing have gone into this truck to eliminate weak points and ensure the highest standards. The result is pure perfection!The SLEDGE is the new benchmark in 1/8 offroad and leaves the competition far behind!LATEST TECHNOLOGIES - OUTSTANDING DURABILITY - HIGHEST QUALITYDetails at a glance:- Aggressive body design- Pinless body mounting design- Color-matched aluminum parts - chassis, shocks, shock towers, T-bar, wheel hubs- Ultra-stiff anodized 3.2mm chassis with T-bar brace- Heavy duty cardan and drive shafts especially for 6s power- Oversized diff gears (20% larger & 75% stronger)- 15Z/52HZ gear ratio adapted to belted tires- Use of the highest quality materials- VXL-6S brushless power system with 2000kV BL motor- TQi 2.4GHz 2-channel remote control system- TSM - TRAXXAS Stability Management- Digital High-Torque 347 servo with metal gears (actuating force 35kg/cm - 7.4V!)- Optimized aluminium motor mount (no flex or movement possible)- Foldable battery holder for a secure fit and easy replacement of the LiPos- Heavy-duty C-hubs (no impractical pivot ball suspension)- Anodized GT-Maxx aluminum shock absorbers- Fixed tie rods for maximum durability (no adjustment possible in crashes)- Sledgehammer belted 6.7” Extreme Offroad tires for maximum durability with 6s power- Waterproof electronics box- Top speeds of up to 115km/h (with 6s LiPo and optional 18Z/46HZ)Dimensions:Length: 604mmWidth: 459mmHeight: 214mmGround clearance: 50mmWheelbase: 384mmWeight: 5.77kg (without battery)Tire size: 6.7” 170 x 84mmRim size: 3.8” 97mmGear ratio: 17.2 (13Z/52HZ module 1)Battery dimensions for narrow configuration: L181mm x W50mm x H29/37/45mmBattery dimensions for wide configuration: L160mm x W57mm x H29/37/45mmNecessary accessories:- 2x drive battery LiPo 3s 11.1V 5000mAh- Charger for LiPo batteries- 4x AA batteries for transmitter

TRAXXAS SLEDGE 1/8 Brushless Monster Truck 4x4With the SLEDGE, TRAXXAS completely redefines the 1/8 offroad class and raises it to a new level."SLEDGE - DOMINANCE in 1/8 Offroad NEWLY DEFINED”With the SLEDGE, TRAXXAS delivers a model with superior performance, significantly improved durability and first-class quality that the enthusiastic off-road driver longs for.Countless hours of development and testing have gone into this truck to eliminate weak points and ensure the highest standards. The result is pure perfection!The SLEDGE is the new benchmark in 1/8 offroad and leaves the competition far behind!LATEST TECHNOLOGIES - OUTSTANDING DURABILITY - HIGHEST QUALITYDetails at a glance:- Aggressive body design- Pinless body mounting design- Color-matched aluminum parts - chassis, shocks, shock towers, T-bar, wheel hubs- Ultra-stiff anodized 3.2mm chassis with T-bar brace- Heavy duty cardan and drive shafts especially for 6s power- Oversized diff gears (20% larger & 75% stronger)- 15Z/52HZ gear ratio adapted to belted tires- Use of the highest quality materials- VXL-6S brushless power system with 2000kV BL motor- TQi 2.4GHz 2-channel remote control system- TSM - TRAXXAS Stability Management- Digital High-Torque 347 servo with metal gears (actuating force 35kg/cm - 7.4V!)- Optimized aluminium motor mount (no flex or movement possible)- Foldable battery holder for a secure fit and easy replacement of the LiPos- Heavy-duty C-hubs (no impractical pivot ball suspension)- Anodized GT-Maxx aluminum shock absorbers- Fixed tie rods for maximum durability (no adjustment possible in crashes)- Sledgehammer belted 6.7” Extreme Offroad tires for maximum durability with 6s power- Waterproof electronics box- Top speeds of up to 115km/h (with 6s LiPo and optional 18Z/46HZ)Dimensions:Length: 604mmWidth: 459mmHeight: 214mmGround clearance: 50mmWheelbase: 384mmWeight: 5.77kg (without battery)Tire size: 6.7” 170 x 84mmRim size: 3.8” 97mmGear ratio: 17.2 (13Z/52HZ module 1)Battery dimensions for narrow configuration: L181mm x W50mm x H29/37/45mmBattery dimensions for wide configuration: L160mm x W57mm x H29/37/45mmNecessary accessories:- 2x drive battery LiPo 3s 11.1V 5000mAh- Charger for LiPo batteries- 4x AA batteries for transmitter

TRAXXAS SLEDGE 1/8 Brushless Monster Truck 4x4With the SLEDGE, TRAXXAS completely redefines the 1/8 offroad class and raises it to a new level."SLEDGE - DOMINANCE in 1/8 Offroad NEWLY DEFINED”With the SLEDGE, TRAXXAS delivers a model with superior performance, significantly improved durability and first-class quality that the enthusiastic off-road driver longs for.Countless hours of development and testing have gone into this truck to eliminate weak points and ensure the highest standards. The result is pure perfection!The SLEDGE is the new benchmark in 1/8 offroad and leaves the competition far behind!LATEST TECHNOLOGIES - OUTSTANDING DURABILITY - HIGHEST QUALITYDetails at a glance:- Aggressive body design- Pinless body mounting design- Color-matched aluminum parts - chassis, shocks, shock towers, T-bar, wheel hubs- Ultra-stiff anodized 3.2mm chassis with T-bar brace- Heavy duty cardan and drive shafts especially for 6s power- Oversized diff gears (20% larger & 75% stronger)- 15Z/52HZ gear ratio adapted to belted tires- Use of the highest quality materials- VXL-6S brushless power system with 2000kV BL motor- TQi 2.4GHz 2-channel remote control system- TSM - TRAXXAS Stability Management- Digital High-Torque 347 servo with metal gears (actuating force 35kg/cm - 7.4V!)- Optimized aluminium motor mount (no flex or movement possible)- Foldable battery holder for a secure fit and easy replacement of the LiPos- Heavy-duty C-hubs (no impractical pivot ball suspension)- Anodized GT-Maxx aluminum shock absorbers- Fixed tie rods for maximum durability (no adjustment possible in crashes)- Sledgehammer belted 6.7” Extreme Offroad tires for maximum durability with 6s power- Waterproof electronics box- Top speeds of up to 115km/h (with 6s LiPo and optional 18Z/46HZ)Dimensions:Length: 604mmWidth: 459mmHeight: 214mmGround clearance: 50mmWheelbase: 384mmWeight: 5.77kg (without battery)Tire size: 6.7” 170 x 84mmRim size: 3.8” 97mmGear ratio: 17.2 (13Z/52HZ module 1)Battery dimensions for narrow configuration: L181mm x W50mm x H29/37/45mmBattery dimensions for wide configuration: L160mm x W57mm x H29/37/45mmNecessary accessories:- 2x drive battery LiPo 3s 11.1V 5000mAh- Charger for LiPo batteries- 4x AA batteries for transmitter