Accessory

Zum Ausgleich der Servo - Einbauhöhe (1.0mm - 4.0mm je Seite)Material AluminiumMaße (LxBxH): je 19.0mm x 7.0mm x 1.0mmLochabstand je Distanzscheibe 10.0mm

This USB adapter is only applicable for ABSIMA programmable servos marked with SMART SERVO. suitable for the following programmable Absima servos:ST23DBF Team Spec.ST50DBT Team Spec.LP16DBF Team Spec.LP20DBT Team Spec.ST18DBF Race Spec.ST40DBT Race Spec.LP15DBF Race Spec.LP19DBT Race Spec.LP34DBT Crawler Spec.System Requirements1. operating voltage: USB(5V/500mA).2. operating system: Windows XP/Windows Vista/Windows 7/Windows 8/Windows10 ( 32/64bit).3. application: ABSIMA programmable servos with "SMART SERVO" marking. THE NECCESSARY SOFTWARE CAN BE FOUND HERE ABOVE IN THE "DOWNLOAD" TABParameter Einstellungen: 1. Servo-Angle: set the servo rotation angle.2. Servo-Neutral: Adjust the servo neutral position Note: If the transmitter rotates to the neutral position and the servo does not stay in the appropriate position, you can change this value to adjust the servo horn. This is equivalent to trimming the transmitter channel. 3. PWM Power: Set the servo output power. The higher the output power, the higher the servo torque and the speed, but also the power consumption is higher.4. Damping factor: Set the damping of the servo.5. Sensitivity: Set the deadband (sensitivity) of the servo.6. Soft Start: Slow recovery when the servo is turned on. As soon as the servo is switched on, it will rotate smoothly to the position of the current input signal. Note: This function is used to prevent damage caused by incorrect mounting of the servo when switching on.7. Inversion: Setting of normal and reverse rotation of the servo.8. Narrow Band: FUTABA SR-Modus9. SANWA SSR: SANWA SSR-Modus. Note: Enable this function to support the SANWA SSR high speed mode. The servo angle may not be accurate, it needs to be readjusted.10. Lose PPM Protection: Signal loss protection, there are three functions to choose from: a. Release: Non-Protection b. Maintain position: Remains in the position before the signal loss c. Neutral position: Back to neutral position (1500uS position)11. Overload protection: Set the servo blocking protection. There are three levels, which are activated by ticking: Stage 1: Set the start time and power value of the primary protection. Stage 2: Setting the start time and power value of the secondary protection. Stage 3: Setting the start time and the power of the tertiary protection. Note: The left side is used to set the protection start-up time, the right side is used to set the output power after the start-up protection is activated.12. Servo-Informationen: Servo-informationen. including servo model, version date and firmware-name. Servo Name: Servo-Model Manufacture: Date of servo version Firmware: Servo firmware name THE NECCESSARY SOFTWARE CAN BE FOUND HERE ABOVE IN THE "DOWNLOAD" TAB

Programming Box for Crawler PRO ESCThe programming box allows easy and precise adjustment of the Crawler PRO ESC. With this box, you can conveniently adjust 13 different parameters with a total of 66 values to optimally configure your crawler's driving behavior.

Programming Box for "CAT" ESC 1:8 / 1:10The Absima programming box allows for quick and effortless programming of your "CAT" electronic speed controller (ESC) for 1:8 and 1:10 scale models. Featuring a user-friendly LCD interface, you can fine-tune your settings both on the track and in your workshop. Compact and portable, it is the ideal companion for any RC enthusiast.Technical Specifications:Size: 115 x 55 x 18.5 mmWeight: 73.5 gESC Connection: FutabaPower Connection: FutabaInput Voltage: 5 - 12.6 V

Safety First !!!! Absima LiPo batteries maintain an extremely high quality standard and thus offer perfect safety. At the same time, performance is not neglected; Absima LiPo batteries deliver what they promise. Range of application: Battery for ABSIMA remote controls. ATTENTION: The radio needs a low voltage cut-off. Otherwise the battery may be damaged. Compatible with:2000008 6-Channel Radio "CR6P"2000009 6-Channel Radio"CR6S"Features: Plug system: BECCapacity: 1200 mAhVoltage: 7.4 VoltBalancer plug system: XHCase type: SoftcaseMeasure (LxWBxH): 51 x 35 x 16 mm

Safety First !!!! Absima LiPo batteries maintain an extremely high quality standard and thus offer perfect safety. At the same time, performance is not neglected; Absima LiPo batteries deliver what they promise. Range of application: Battery for ABSIMA remote controls. INCLUDING LOW VOLTAGE CUT-OFF to avoid a deep discharge! Compatible with:2000001/2000101 2-Channel Radio "CR2SV2"2000002/2000102 3-Channel Radio"CR3P"2000103 4-Channel Radio"CR4S"Features: Plug system: JR/FUTCapacity: 1200 mAhVoltage: 7.4 VoltBalancer plug system: XHCase type: SoftcaseMeasure (LxWBxH): 50 x 35 x 15 mmWeight: approx. 50 g

Ideal to use the ESS-One sound modules in a Traxxas model.

3 mode servo checker for 1-3 servos or ESC.Features:Manual Mode - Check reaction times by varying dial positionNeutral Mode - Re-set servo to its neutral point.Automatic Mode - 'Window Wiper' tests servos maximum throw

Servo discs for precise mounting and even distribution of the force applied to your servo housing to prevent damage. Threaded spacers allow pre-assembly so that washers are not lost during assembly!

Input voltage: DC/4.8-6VPulse length: 800-2200µsUp to 4 servos can be connected simultaneously and tested synchronouslyDigital display of pulse ratesEasy servo center finding by automatic centering to 1500µs3 modes adjustable:1. S-1 manual mode2. S-2 automatic centering3. S-3 auto run, min-max (repeated)Clocking for digital and analog servos adjustable1. 50Hz anaolog servos2. 125Hz digital servos3. 250Hz digital highspeed servos

Prove anywhere and anytime with your smartphone how fast your RC car, plane or helicopter really is. With this small device, SKYRC gives the speed and other parameters directly to your Smartphone. Simply download the app, attach the Performance Analyzer and you are ready to go!The popularity of Global Navigation Satelite System devices inspired SkyRC to design this gadget at about 38g. The Speed Meter is the result of SkyRCs ongoing development efforts, boasting an ultra compact GPS module with hidden antenna design, the high-sensitivity GPS receiver chip can do quick positioning, a robust controller IC to keep recording speed and altitude in real time. The collected data gets transfered to your Phone with the next Blutooth connection.This gadget is ideal for RC racing/flying and casual biking, driving and long journey. The user is able to easily get insights of the Acceleration, G-force, Speed, Time, Distance, High and Vertical Velocity. So this is the perfect tool to become a top driver or pilot! Features3 different Modes for every opportunity (Drag Race, Track Race, Flying Mode)Built-in 1M flash (for up to 50 data records)Built-in rechargeable, LiPo bettery 200mAh (for more than 5 hours)In the App recorded data turns into useful analysisGPS Coordinator Support both Metric and Imperial system of measurementsTechnical Data:Receiver: L1, 1575.42 MHZUpdate frequency: 10 Hz.Antenna type: Built-inSatellite signal reception sensitivity: -167dBmDimensions: 39x40x16mmWeight: 38gOperating temperature: 0° to +40°Storage temperature: -10° to +70°

In addition to all the advantages of the GC301, the GC401 offers three selectable sensor modes depending on the route profile. The desired mode is simply preselected by pressing a button.When driving, the GC401 actively intervenes in the steering when the vehicle begins to slip or drift, providing more precise, stable and controllable steering.Features3 selectable sensor modesL-DRIVE: Ideal for small and winding roadsS-DRIVE: Standard modeH-DRIVE: For tracks with long straights and large curve radiiSensitivity adjustable via transmitter (3rd channel)Technical dataGyro sensor: vibration structure gyroOperating voltage: 4.0V-8.4VCurrent consumption: 25mAOperating temperature: -10ºC to +45ºCDimensions: 21x21x11mmWeight: 3.6g