ESC

XP SC1300-DB Brushless ESC

1:10 Brushed V2 Standard & Crawler ESC 80A waterproof

We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the ESC. In addition, a programming card is available, which can be used for even more settings. HIGHLIGHTS:One ESC for all vehicle types (Crawler, Off-road, On-road, Boot)Programmable via jumper and separately available programming card (Item: 2110061)2-3S LiPo capableContinuous load: 80ABEC: 5A / 6.0VProgrammable Features (via programming card): Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Leicht zu programmieren durch Jumper und Programmierkarte im Taschenformat (separat erhätlich - Art. 2110061)Specification:Continuous/short time load: 80A/320AResistance: 0.0014ohmMotor type: Brushed standard motors Battery: 2-3S LiPo / 5-9 cells NiMHBEC 6.0V/5AMotor Limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25,000rpm.Motor Limit 3S LiPo/7-9 cells NiMH: ≥ 18T or <17,000U/min.Cable lengths: BEC: 180mm / Motor: 200mm / Power: 200mmDimensions: 41.5*35*29.5mmWeight: 63.4gScope of delivery:1:10 Brushed Speed Controller V2Adhesive TapeManual

14T Racing Motor & 80A ESC Thrust B-Spec V2 Combo

We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)Programmable via jumper and separately available programming card (Item 2110061)2S LiPo operation recommendedMotor ready soldered - plug-n-playProgrammable features (via programming card):Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features ESC:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)Specification ESC:Continuous/short-term load: 80A/320AResistance: 0.0014ohmSuitable motor types: Brushed standard motors Battery recommendation: 2S LiPo / 6 cells NiMHBEC 6.0V/5AMotor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM Measure: 41.5*35*29.5mmPlug system: T-plugWeight: 63.4gSpecification B-Spec Motor:Turns: 14TSpeed: 26.300RPMOutput power: 160WOperating voltage: 7.2-7.4VTechnical Size: 540Motor shaft: Length 12,3mm; Durchmesser: 3,18mm Motor size: Length 53,2mm; Durchmesser: 35,7mm Ball bearings: 2Weight: 165gLieferumfang:1:10 Brushed V2 Speed ControllerThrust B-Spec Brushed MotorAdhesive TapeManual

17T Racing Motor & 80A ESC Thrust B-Spec V2 Combo

We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)Programmable via jumper and separately available programming card (Item 2110061)2S LiPo operation recommendedMotor ready soldered - plug-n-playProgrammable features (via programming card):Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features ESC:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)Specification ESC:Continuous/short-term load: 80A/320AResistance: 0.0014ohmSuitable motor types: Brushed standard motors Battery recommendation: 2S LiPo / 6 cells NiMHBEC 6.0V/5AMotor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM Measure: 41.5*35*29.5mmPlug system: T-plugWeight: 63.4gSpecification B-Spec Motor:Turns: 17TSpeed: 28.800RPMOutput power: 155WOperating voltage: 7.2-7.4VTechnical Size: 540Motor shaft: Length 12,3mm; Durchmesser: 3,18mm Motor size: Length 53,2mm; Durchmesser: 35,7mm Ball bearings: 2Weight: 165gLieferumfang:1:10 Brushed V2 Speed ControllerThrust B-Spec Brushed MotorAdhesive TapeManual

1:10 Brushless Competition ESC "CATS-10" 160A

1:10 Brushless Competition ESC "CATS-10" 160AThe 1:10 Brushless Competition ESC "CATS-10" with 160A from Absima is a high-quality electronic speed controller specifically designed for 1:10 scale competition vehicles. With a continuous current capacity of 160A, it offers excellent performance and reliability for demanding RC racers.

1:8 Revoc II XTR 160 2-6S ESC red

The Team Corally REVOC II XTR 160 "RACING FACTORY" electronic speed controller for sensored and sensorless motors are being fine tuned for the today's high power brushless motors. Everything can be set-up on these controllers to provide you the best functionality and performance.The REVOC II XTR 160 "RACING FACTORY" manufactured with the highest grade components to ensure the lowest possible internal resistance resulting in a optimised performance. These controllers give the competition racer what he needs. You will experience the best controllability of your RC car, no matter you use it in a on-road or off-road car.Features:- For sensored and sensorless motors- Manufactured with the highest grade components- Ultra compact design- Aluminum case for improved heat dissipation- Waterproof power switch- Advanced boost - turbo timing system for improved acceleration performance- Enhanced throttle - brake control function.- 10 programmed profiles can be stored in the ESC- High power 5A BEC- Powerful TC Link software to test motor timing and advise the best ESC timing settingProgramming Features:General Settings- Running Mode- Cut-off Voltage- Overheat protection- Motor Rotation- Reverse SpeedThrottle Control- Dead Band- Punch Rate SW- Point- Punch Rate 1- Punch Rate 2- Throttle CurveBrake Control- Initial Brake- Drag Brake- Brake Strength- Brake Rate Control- Brake CurveTurbo Timing- Turbo Timing- Turbo Delay- Turbo SlopePower SpecsApplication: 1/8 Off-Road - 1/8 On-RoadCont. Current (A): 160ABurst (A): 900ANr of Li-xx Cells: 2-6SBEC: 6V 5AMotor Type: Sensored - SensorlessMotor Limits:2S - 4S=< 3000 KV - 4-6 Poles2S - 6S=< 2200 KV - 2-4 PolesResistance: 0.00020 ohmDimensions: 58x42x36mmWeight: 117g (without power leads)

1:8 Revoc II XTR 160 2-6S ESC silver

The Team Corally REVOC II XTR 160 "RACING FACTORY" electronic speed controller for sensored and sensorless motors are being fine tuned for the today's high power brushless motors. Everything can be set-up on these controllers to provide you the best functionality and performance.The REVOC II XTR 160 "RACING FACTORY" manufactured with the highest grade components to ensure the lowest possible internal resistance resulting in a optimised performance. These controllers give the competition racer what he needs. You will experience the best controllability of your RC car, no matter you use it in a on-road or off-road car.Features:- For sensored and sensorless motors- Manufactured with the highest grade components- Ultra compact design- Aluminum case for improved heat dissipation- Waterproof power switch- Advanced boost - turbo timing system for improved acceleration performance- Enhanced throttle - brake control function.- 10 programmed profiles can be stored in the ESC- High power 5A BEC- Powerful TC Link software to test motor timing and advise the best ESC timing settingProgramming Features:General Settings- Running Mode- Cut-off Voltage- Overheat protection- Motor Rotation- Reverse SpeedThrottle Control- Dead Band- Punch Rate SW- Point- Punch Rate 1- Punch Rate 2- Throttle CurveBrake Control- Initial Brake- Drag Brake- Brake Strength- Brake Rate Control- Brake CurveTurbo Timing- Turbo Timing- Turbo Delay- Turbo SlopePower SpecsApplication: 1/8 Off-Road - 1/8 On-RoadCont. Current (A): 160ABurst (A): 900ANr of Li-xx Cells: 2-6SBEC: 6V 5AMotor Type: Sensored - SensorlessMotor Limits:2S - 4S=< 3000 KV - 4-6 Poles2S - 6S=< 2200 KV - 2-4 PolesResistance: 0.00020 ohmDimensions: 58x42x36mmWeight: 117g (without power leads)

Cerix II RS-160 Racing Factory 2-3S ESC

The Team Corally CERIX II RS-160 "RACING FACTORY" electronic speed controller for sensored and sensorless motors is being fine tuned for the today's high power brushless motors. Everything can be set-up on these controllers to provide you the best functionality and performance.The CERIX II RS-160 "RACING FACTORY" is manufactured with the highest grade components to ensure the lowest possible internal resistance resulting in a optimised performance. The CERIX II RS-160 "RACING FACTORY" controller give the 1/10 On-Road and 1/10 Off-Road competition racer what he needs. You will experience the best controllability of your 1/10 Racing Cars, no matter you use it with Spec or Modified motorsFeatures:- For sensored and sensorless motors- Manufactured with the highest grade components- Ultra compact design- Aluminum case for improved heat dissipation- Built in Capacitors- Built in power switch- Advanced boost and turbo timing system for improved acceleration performance- Enhanced throttle and brake control function.- 10 programmed profiles can be stored in the ESC- Adjustable BEC voltage 6.0V 5A or 7.4V 5A Current- Powerful TC Link software to test motor timing and advise the best ESC timing settingProgramming Features:General Settings- Running Mode- Cut-off Voltage- Overheat protection- Motor Rotation- Reverse SpeedThrottle Control- Dead Band- Punch Rate SW- Point- Punch Rate 1- Punch Rate 2- Throttle CurveBrake Control- Initial Brake- Drag Brake- Brake Strength- Brake Rate Control- Brake CurveBoost Function- Boost Timing- Start RPM- End RPM- Boost Constraint- Boost SlopeTurbo Timing- Turbo Timing- Activation Method- Turbo Delay- Start RPM- Turbo SlopePower Specs:Application: 1/10 Touring - 1/10 Pan Car - 1/10 Off-Road - CrawlersCont. Current (A): 160ABurst (A): 800ANr of Li-xx Cells: 2 - 3SBEC: 6V 5A or 7.4V 5AMotor Type: Sensored - SensorlessMotor Limits:2S Li-Po=> 3.5T - 1/10 On-Road=> 5.5T - 1/10 Off-Road3S Li-Po=> 5.5T - 1/10 On-Road=> 8.5T - 1/10 Off-RoadResistance: 0.00018 ohmDimensions: 37x33x22mm (30mm Fan)Weight: 43g (51g Fan)

TOROX 185 Brushless ESC 3-6S

Max. Cont. Current (A): 185 AMax. Current (A): 950 AInput Voltage (V) min. - max.: 11.1-22.2Nr of Li-xx Cells: 3-6SNr of Ni-xx Cells: 9-18 Cell NiMHMotor Type: Sensored / Sensorless Brushless Motor (only in sensorless mode)Motor Limit: 4S LiPo = 3000 Kv (5892 size motor) and 6S LiPo = 2400 Kv (5892 size motor)BEC Voltage (V): 6-7.4 V programmableBEC Current (A): 6 ALength (mm): 60.0 mmWidth (mm): 48.0 mmHeight (mm): 36.2 mmWeight incl. wire (g): 189 gProgrammable: YesProgramming Card: Hobbywing LED (optional)Throttle Mode: Forward / Reverse programmable Reverse lockoutDrag Brake: 0-16% programmableBattery Mode: NiMH/LiPo programmableLipo Cut off: programmableThermal Protection Temperature: 105°C / 125°C programmableWater Protection: YesCooling Fan: 30x30x10 mmConnector (Motor): 6.5 mm femaleConnector (Battery): XT90-connectorBattery wire size: 10 AWGCar Type Use: 1/8th scale

Samurai Pro 120A 2-3S waterproof ESC

Content current: 120ABurst current: 760ASuitable for: 1:10 and 1:12 RC CarMotor type: 540 Sensor BrushlessNiMh: 5-10 CellLipo/LiFE/Li-Ion: 2-3 CellBEC output: 3A@5VSize: 41,5x37x21mmWeight: 102g

Samurai Pro-SCT 120A/2-4S ESC Waterproof

Cont. Current: 120ABurst Current: 760ASuitable: 1:10 Short Course CarMotor Type: 2 Pol senorless Brushless Motor up to 5150kVNiMh: 5-12 CellLipo/LiFE/Li-Ion: 2-4 CellBEC Output: 6.0/7.4V 7ASize: 51x37x33mmWeight: 90g

Ezrun MAX10 G2 ESC 140A 2-4s LiPo BEC 5A

The second generation of the Ezrun Max10 ESCs with 140A brings with it a variety of innovations and optimizations that make driving 1/10 short courses and trucks even more enjoyable. For example, the improved sensor mode with accompanying waterproof cable provides great throttle response - especially when paired with an Ezrun 3652/3665 G3 motor. Compared with the previous generation, MAX10 G2 also has stronger power and more stable output power. At the same time, of course, this brings excellent linearity even at low speeds.In terms of heat development, no other ESC can beat the MAX10 G2 so quickly. Thanks to an innovative protection system, the capacity of the capacitors has also been increased by 74% and are at the same time protected against overheating. Ultimately, this ensures better power transmission from the battery to the controller and overcharging is less likely than before.Technical SpecificationsType: 1/10 Brushless SensoredCurrent (cont./peak): 140A / 880AInput Voltage: 2-4S LiPoBEC: 6V/7.4V, 5AMotor Types: Brushless Motors (with/without sensor)Motor Limits: 3S LiPo: KV<=4000 - 3665er Motor4S LiPo: KV<=2600 - 4268er MotorFan: Yes, powered by BECFan Size: 30x30x10mmProgramming: LED Program CardLCD Program Box (G2)OTA Program ModuleSeperate Programming PortWaterproof: YesInput: XT60Output: 4.00mm Gold (female)Dimensions: 53x39.5x37.2mmWeight: 120gApplication: 1/10 Short Course Truck, Truck and Monster TruckOptional Accessories:HW30501003 LED Program CardHW30502001 LCD G2 Program BoxHW30850400 OTA Program Module

Ezrun MAX8 G2 ESC Sensorless 160A 3-6s LiPo BEC 6A

The Ezrun MAX8 G2 ESC is the next evolutionary step for all 1:8 on-roaders and trucks and is just as coveted as its predecessor. The dynamic specifications perfectly meet the modern needs of performance-hungry drivers. Strong output power along with excellent low-speed linearity in full-sensored mode are the top selling points for the Ezrun MAX8 G2.Thanks to the built-in 32° turbo timing, You can even increase the maximum speed by 25% if a suitable motor such as the Ezrun 4278SD is being used. Enjoy the ride and defy all weather conditions. Because the implementation of the IP-67 standard in the design also makes the ESC extremely dustproof and waterproof. However, You only get full safety when using a motor that can be connected via the newly designed sensor cable. Equipped with a smart technology developed by Hobbywing, the MAX8 G2 can also further effectively increase performance at a low temperature. A whole 25°C less than the regular MAX8 controller is possible.FeaturesGreat flexibility & versatilityNew sensor cable designSuitable for all weather conditionsAdvanced and safe electronic switchSuper built-in BECLarge built-in capacitorsReal-time data & data recording possibleLarge area of applicationPlug & playAlmost maintenance freeTechnical Specifications:Current cont./peak: 160A/1050AMotor Type: Brushless, Sensored and SensorlessMotor Limits Brushless: 4S Lipo: KV=3000; 6S Lipo: KV=24004278 sized MotorLiPo: 3-6S LiPoBEC Output: 6V / 7.4V / 8.4V with 10A (adjustable)Fan: Yes (powered with the internal BEC)Programming Input: Fan-InputESC Programming: LCD G2 Program BoxLED Program BoxOTA Programming ModuleDimensions: 60x48x40.5mmWeight: 192gApplications: 1/8 On-Road, Short Course Truck and Monster Truck

EzRun Max8 G2S ESC 3-6S/160A

The Ezrun MAX8 G2S controller is just as powerful as the MAX8 G2. Suitable for all 1:8 scale on-roaders and trucks and just as versatile in its programming options. The only difference is in the programming itself, because the G2S has an integrated Bluetooth signal, making any accessories superfluous for programming. All that is needed now is a smartphone with the Hobbywing app "HWLink2”.The dynamic specifications of the controller perfectly meet the modern needs of performance-hungry drivers. The strong output power together with the excellent linearity at low speed in full-sensored mode are the top arguments in favor of the Ezrun MAX8 G2S. Thanks to the built-in 32° turbo timing, you can even increase the maximum speed by 25% if you use a suitable motor such as the Ezrun 4278SD. Enjoy the ride and defy all weathers. The implementation of the IP-67 standard in the design also makes the controller extremely dust and waterproof. However, you only get full safety when using a motor that can be connected via the newly developed sensor cable. Equipped with a smart technology developed by Hobbywing, the MAX8 G2S can also effectively increase performance at a low temperature. As much as 25°C less than the regular MAX8 controller is possible, making failures less likely.Technical dataType: Brushless, SensoredCurrent (continuous/short): 160A / 1050AInput voltage: 3-6S LiPoBEC: 6V / 7.4V / 8.4V at 6A (switch mode)Motor types: Brushless motors (with and without sensor)Motor limit: 4S: <=3000kV6S: <=2400kV, 4278 motorFan: Yes, operated via the BECConnections: XT90 connector6.0mm bullet socketProgramming: iOS / Android smartphoneDimensions: 60 x 48 x 40.5mmWeight: 192gSuitable vehicles: 1/8 on-road, short course truck, monster truckContentsEzrun MAX8 G2S controllerManual (English) Stickers & mounting accessories

Ezrun MAX5 ESC

Ezrun MAX5 ESC Sensorless 200 Amp, 3-8s LiPo, BEC 6A

Ezrun MAX5 HV G2 ESC

Hobbywing Ezrun MAX5 HV G2 ESC Sensorless 250 Amp, 6-12s LiPo, BEC 8A The EzRun MAX5 HV G2 is an impressive brushless ESC with high-voltage capability. With support for up to 12s LiPo and a maximum output current of 250A, it delivers explosive power and excellent linearity. Thanks to intelligent freewheel technology, the controller remains relaxed and cool even during demanding driving manoeuvres. This controller is protected against water and dust according to the IP 67 standard. Of course, this also makes the MAX5 HV G2 suitable for use in all weather conditions and allows it to operate on various surfaces such as mud, sand, ice, snow and water without damaging the power unit. With a powerful built-in BEC, anti-spark design and multi-directional protection, this ESC offers advanced functions and high safety. The EzRun MAX5 HV G2 is the ideal choice for RC enthusiasts looking for maximum potential and reliability. The operational status can even be monitored by recording and storing real-time data. And the upgrade of the sensor cable interface greatly improves the protection and waterproof performance of the ESC. With perfect compatibility with Hobbywing's EzRun 56118 SD G2 motor, this power system offers an unbeatable team for optimal performance and protection against overheating.Features Now with even more performance than its predecessor Water-proof and dust-proof for all-weather races. (Note: please uninstall the cooling fan before using this ESC in water; Clean and dry it soon after the use for avoiding the connectors get rusty.)  Built-in ultra-strong switching mode BEC to address a wide variety of servos. Includes turbo timing adjustment. Especially recommended with the right motor (e.g. EZRUN 56118SD G2). Multiple protections: battery low voltage protection, ESC and motor overheat protection, signal loss protection, current protection. Supports LED program box, LCD-G2 program card and the OTA programming module to set the controller parameters more easily. Data logging function to view various running data on HW LINK app using OTA Bluetooth module. Supports controller firmware upgrade (requires multi-function LCD-G2 program box or OTA programming module to purchase). 12 adjustable parameters. Technical Specifications Type: 1/5 Brushless Sensored Current (cont./peak): 120A / 760A Input Voltage: 6-12S LiPo BEC: 6V/7.4V/8.4V @8A (Switch Mode) Motor Types: Brushless Motors (with/without sensor) Motor Limits: - 8S Lipo: KV <= 1200 - 12S Lipo: KV <= 800 56118 size motor Fan: Yes, powered by BEC Programming: LED Program CardLCD Program Box (G2)OTA ProgrammerSeperate Programming Port Waterproof: Yes Input:   Output: 8.00mm Bullet Connector (female) Dimensions: 94.5x59.4x50.9mm Weight: 428.5g Application: 1/5 Buggy, Truck Delivery: Ezrun MAX5 HV G2 ESC Optional Accessories: HW30501003 LED Program Card HW30502001 LCD G2 Program Box HW30850400 OTA Programmer

Ezrun MAX6 ESC

Ezrun MAX6 Regler Sensorless 160A 3-8s LiPo BEC 6A

QuicRun 10BL60 60A Sensored ESC

Sensored ESCWaterproof: noCont.Current: 60APeak Current: 380ACar Applicable:1/10 & 1/12 On-road / Off-road/ F1 / Drift car raceStreet race for fun / Club racing /STOCK race with 0 timing /Drift car raceMotor Limit:For 2S Lipo or 4-6 cells NiMH:- >=8.5T(1/10 On-road),- >=13.5T(1/10 Off-road)For 3S Lipo or 8-9 cells NiMH:- >=13.5T(1/10 On-road),- >=17.5T(1/10 Off-road) Battery: 4-9 cells NiMH, 2-3S LipoBEC Output: 6V@2A (Linear Mode), (The cooling fan gets its power supply from the built-in BEC)Size: 33x28x31.5mm with cooling fanWeight: 59g, (with wires, without cooling Fan)

QuicRun WP16BL30 Brushless ESC 30A for 1:16

Die QuicRun Serie von HobbyWing beinhaltet Brushed und Brushless Antriebssysteme. Bei den Brushless Systemen gibt es zudem sensorlose als auch sensor basierende Antriebe, somit bietet diese Serie für jeden Bedarf eine passende Lösung an. Die Serie ist zudem sehr kostengünstig und richtet sich in erster Linie an Anfänger und Fortgeschrittene Piloten. Sie überzeugt zudem durch die herausragende bekannte Qualität der Hobbywing Produkte als auch durch die unkomplizierte Inbetriebnahme.Eigenschaften- Wasser- & Staubgeschützt für den Einsatz bei jedem Wetter(Hinweis: Entfernen Sie den Lüfter vor der Benutzung mit Wasser, Reinigen und trocken Sie den Regler gleich nach der Benutzung um Schäden zu vermeiden.) - Proportionale Bremse mit einstellbarer max. Bremskraft sowie Automatik-Bremse- 9 verschiedene Beschleunigungsprogramme von "soft" bis sehr "aggressiv" können je nach Modell und Strecke gewählt werden.- Diverses Schutzfunktionen:- - Niederspannungsschutz für Akkus- - Thermischer Überhitzungsschutz- - Gassignal Verlustschutz- Einfache Programmierung über einen "Set" Knopf am Regler- Kompatibel mit der optionalen "LED Program Card" für eine noch einfachere Programmierung immer und überall.SpecificationsKonst. / Kurzzeitige Belastung: 30A/180AInnenwiederstand: 0.002OhmMotor Type Unterstützung: Sensorless Brushless MotorenAnwendung: 1/18 & 1/16 On-road/Off-road Buggy/MonsterMotor LimitFür 2S Lipo oder 6 Zellen NiMHOn-road: Motoren der 2435 Größe oder kleiner mit KV < 8000Off-road/Buggy/Monster: Motoren der 2453 Größe oder kleiner mit KV < 5000Für 3S Lipo oder 9 Zellen NiMHOn-road: Motoren der 2453 Größe oder kleiner mit KV < 5500Off-road/Buggy/Monster: Motoren der 2453 Größe oder kleiner mit KV < 3500Akkus: 4-9 Zellen NiMH2-3S LiPoBEC Ausgang: 6V / 1A (Linear Mode)Abmessungen (LxBxH): 36 x 28 x 16mmGewicht: 38g Externer Programmieranschluss: NeinArbeitsspannung des Lüfters: Ohne Lüfter

Xerun XR8 Pro G3 Brushless ESC

Xerun XR8 Pro G3 Brushless ESC 200A, 2-4s LiPo, BEC 6A

QuicRun 1625 Brushed ESC 25A 1:16 1:18

The QuicRun series of products include brushed power systems, sensored brushless power systems and sensorless brushless power systems. They are very cost-effective, and specially for beginners and intermediate-level drivers. This series not only continue the outstanding quality of HOBBYWING products, but also simplify the operation. Users can directly use them without any complicated adjustments.FeaturesWater-proof and dust-proof, suitable for all-weather condition races.Small size with built-in capacitor module.Fwd/Rev/Br running mode fits for various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).Great current endurance capability.Switch mode built-in BEC has powerful output.Automatic throttle range calibration, easy to use.Easy to set the ESC parameters with jumpers.SpecificationsFwd. Cont. / Peak Current: 25A / 100ARev. Cont. / Peak Current: 25A / 100AVoltage Range: 2-3S Lipo or 5-9 NiMHCars: 1/18 & 1/16Applicable:Touring CarBuggyShort Course TruckMonsterTruggyMotor Limit:2S Lipo or 6 cells NiMH: 280, 370, 380 Size Motor: = RPM<30000 @7.2V3S Lipo or 9 cells NiMH: 280, 370, 380 Size Motor: = RPM<20000 @7.2VResistance: Fwd 0.003O / Rev 0.003OBEC Output: 1A/5V (Linear Mode)PWM Frequency: 1KHzDimension / Weight: 34*24*14 / 23,5gCooling Fan: NoThe battery type can be programmed by jumper.Battery Type: Lipo / NiMH

QuicRun 1060 Brushed ESC 60A 1:10

Spannungsbereich: 2-3S Lipo oder 5-9 NiMHMotor Limit: - 2S Lipo oder 6 Zellen NiMH: 540, 550 Baugröße Motor: >=12T oder U/Min < 30000 @7.2V - 3S Lipo oder 9 Zellen NiMH: 540, 550 Baugröße Motor: >=18T oder U/Min < 20000 @7.2VInnenwiederstand: Vorwärts 0.001O / Rückwärts 0.002OBEC Ausgang: 2A / 5V (Linear Mode)PWM Frequenz: 1KHzAbmessungen: 36,5 x 32 x 18Gewicht: 39gLüfter: OhneDer Regler kann über Jumper programmiert werden.Betriebsmodi: - Vorwärts / Bremse / Rückwärts - Vorwärts / Bremse - Vorwärts / Rückwärts (auch Crawler Mode genannt) Akku Type: LiPo / NiMH

Quicrun WP 1080 G2 brushed

Hobbywing QuicRun WP 1080 G2 Crawler ESCFour running modes are available - Fits a variety of control habits and control needs:Forward with brakesForward & reverse with brakesForward & reverseReal car running modeThe first ”Real Car Mode”The direction of the motor is switchable in real time by using the idle channel on the transmitter. Pull the trigger for "forward" Push the trigger for "brake" Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver) This new feature will provide the user with a unique experience unlike any other.Multiple, easy to set parameters15 Programmable Items let's drivers easily tune their vehicle with the LED Programming Box connected to the programming port.Temperature control upgradeThe New design reduces operating temperatures of the ESC by about 15 degrees improving reliability. The ESC also has a fan mount to meet additional cooling needsBEC UpgradeThe BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market.IP67 ProtectionIP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces.Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging.Features:Fully waterproof design for all conditions. (Note: please clean and dry it after use for avoiding rusty connectors)HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the CNC-machined aluminum reticular heat sink for great heat dissipation.High reliable electronic switch design prevents mechanical switch failure due to dirt, water, dust and etc.Tunable drag brake and drag brake rate for different vehicles, tracks and control feel. Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel.Innovative real car mode, make the downhill control of the vehicle more stable, and provide new fun for the car.It has the function of using transmitter (AUX channel) to adjust the drag brake force in real time, and switch the drag brake force anytime and anywhere according to the demand.Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection.Separate programming port to easily connect the LED program card to the ESC.Single-button ESC programming and factory reset.ESC programming via Hobbywing LED program cardSpecifications:Type: 1/10, Brushed, Waterproof ESCCont./Peak Current: 80A/400AInput Voltage: 2-3S Lipo / 5-9S NiMHBEC Output: 6/7.4/8.4V @ 4 (6A Peak)Input Wires: 14AWG-200mmOutput Wires: 14AWG-200mmInput Connector: XT60Output Connectors: 4.0mm Bullet Connectors (Female)Size: 37.2x31.9x18.4mmWeight: 70.2g (w/Wires)Motors: 540 & 550 Size Brushed MotorsVehicles: 1/10 Rock CrawlersFirmware Upgrade: Not SupportedESC Programing via:SET Button on ESC: SupportedLED Program Box: SupportedLCD G2 Program Box: Not SupportedOTA Programmer: Not SupportedProgram Port: Separate

QuicRun 0880 Dual Brushed ESC 80A 1:10

The QuicRun 0880 Dual Brushed ESC has two sets of output wires for simultaneously connecting to two motors which are used synchronously. Its very convenient for vehicles which are driven by two motors.The waterproof and dust-proof design allows the QuicRun 0880 Dual Brushed ESC to be used in all weather conditions without any issue of damage caused to the ESC from water or debris.The adjustable PWM frequency combined with advanced DEO/freewheeling technology guarantees users great throttle linearity and driving feel. Multiple Programmable Items which features 15 programmable parameter is applicable to various vehicles and tracks.Features:- Control of 2 motors simultaneously- Strong BEC with 6V/4A- Water and dust proof- 15 programmable parameter items- PWM frequency adjustable- DEO/freewheeling technology for great throttle linearity and driving feeling- Separate programming port- Compact design Technical Specification:Typ and motor size: Brushed 540/550/775Current const./peak: 80A/400ACells: 2-4s LiPo / 5-12 Zellen NiMHMotor Limit 540/550: 2s LiPo, 6s NiMH: > 12T or < 30000 RPM3s LiPo, 9s NiMH: > 18T or < 20000 RPM4s Lipo, 12s NiMH: > 24T or < 15000 RPMWhen driving 2 motor, the Turns oft teh motors need to be increased accordingly.BEC: Switch Mode: 6V/4AInput connector: NoOutput connector: Bullet 4mm (female)Dimension: 45.9x34.7x26.5mmWeight: 75gWaterproof: YesApplicable: 1/8, 1/10 Rock CrawlerScope of Delivery:1x ESC1x Sticker1x ManualOptional Accessory:1x HW30501003 LED-Programm box