1:10

We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the ESC. In addition, a programming card is available, which can be used for even more settings. HIGHLIGHTS:One ESC for all vehicle types (Crawler, Off-road, On-road, Boot)Programmable via jumper and separately available programming card (Item: 2110061)2-3S LiPo capableContinuous load: 80ABEC: 5A / 6.0VProgrammable Features (via programming card): Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Leicht zu programmieren durch Jumper und Programmierkarte im Taschenformat (separat erhätlich - Art. 2110061)Specification:Continuous/short time load: 80A/320AResistance: 0.0014ohmMotor type: Brushed standard motors Battery: 2-3S LiPo / 5-9 cells NiMHBEC 6.0V/5AMotor Limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25,000rpm.Motor Limit 3S LiPo/7-9 cells NiMH: ≥ 18T or <17,000U/min.Cable lengths: BEC: 180mm / Motor: 200mm / Power: 200mmDimensions: 41.5*35*29.5mmWeight: 63.4gScope of delivery:1:10 Brushed Speed Controller V2Adhesive TapeManual

We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)Programmable via jumper and separately available programming card (Item 2110061)2S LiPo operation recommendedMotor ready soldered - plug-n-playProgrammable features (via programming card):Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features ESC:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)Specification ESC:Continuous/short-term load: 80A/320AResistance: 0.0014ohmSuitable motor types: Brushed standard motors Battery recommendation: 2S LiPo / 6 cells NiMHBEC 6.0V/5AMotor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM Measure: 41.5*35*29.5mmPlug system: T-plugWeight: 63.4gSpecification B-Spec Motor:Turns: 14TSpeed: 26.300RPMOutput power: 160WOperating voltage: 7.2-7.4VTechnical Size: 540Motor shaft: Length 12,3mm; Durchmesser: 3,18mm Motor size: Length 53,2mm; Durchmesser: 35,7mm Ball bearings: 2Weight: 165gLieferumfang:1:10 Brushed V2 Speed ControllerThrust B-Spec Brushed MotorAdhesive TapeManual

We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)Programmable via jumper and separately available programming card (Item 2110061)2S LiPo operation recommendedMotor ready soldered - plug-n-playProgrammable features (via programming card):Initial Start Force: 5%* / 13% / 21% / 29% Low V cut-off: 3.1V* / 3.4V / OffCrawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%Max Reverse Force: 50%* / 75% / 100%Start Mode (Punch): Medium* / Strong / Soft Standard Features ESC:Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.Low internal resistance and excellent heat dissipation.Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)Specification ESC:Continuous/short-term load: 80A/320AResistance: 0.0014ohmSuitable motor types: Brushed standard motors Battery recommendation: 2S LiPo / 6 cells NiMHBEC 6.0V/5AMotor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM Measure: 41.5*35*29.5mmPlug system: T-plugWeight: 63.4gSpecification B-Spec Motor:Turns: 17TSpeed: 28.800RPMOutput power: 155WOperating voltage: 7.2-7.4VTechnical Size: 540Motor shaft: Length 12,3mm; Durchmesser: 3,18mm Motor size: Length 53,2mm; Durchmesser: 35,7mm Ball bearings: 2Weight: 165gLieferumfang:1:10 Brushed V2 Speed ControllerThrust B-Spec Brushed MotorAdhesive TapeManual

1:10 Brushless Competition ESC "CATS-10" 160AThe 1:10 Brushless Competition ESC "CATS-10" with 160A from Absima is a high-quality electronic speed controller specifically designed for 1:10 scale competition vehicles. With a continuous current capacity of 160A, it offers excellent performance and reliability for demanding RC racers.

The Team Corally CERIX II RS-160 "RACING FACTORY" electronic speed controller for sensored and sensorless motors is being fine tuned for the today's high power brushless motors. Everything can be set-up on these controllers to provide you the best functionality and performance.The CERIX II RS-160 "RACING FACTORY" is manufactured with the highest grade components to ensure the lowest possible internal resistance resulting in a optimised performance. The CERIX II RS-160 "RACING FACTORY" controller give the 1/10 On-Road and 1/10 Off-Road competition racer what he needs. You will experience the best controllability of your 1/10 Racing Cars, no matter you use it with Spec or Modified motorsFeatures:- For sensored and sensorless motors- Manufactured with the highest grade components- Ultra compact design- Aluminum case for improved heat dissipation- Built in Capacitors- Built in power switch- Advanced boost and turbo timing system for improved acceleration performance- Enhanced throttle and brake control function.- 10 programmed profiles can be stored in the ESC- Adjustable BEC voltage 6.0V 5A or 7.4V 5A Current- Powerful TC Link software to test motor timing and advise the best ESC timing settingProgramming Features:General Settings- Running Mode- Cut-off Voltage- Overheat protection- Motor Rotation- Reverse SpeedThrottle Control- Dead Band- Punch Rate SW- Point- Punch Rate 1- Punch Rate 2- Throttle CurveBrake Control- Initial Brake- Drag Brake- Brake Strength- Brake Rate Control- Brake CurveBoost Function- Boost Timing- Start RPM- End RPM- Boost Constraint- Boost SlopeTurbo Timing- Turbo Timing- Activation Method- Turbo Delay- Start RPM- Turbo SlopePower Specs:Application: 1/10 Touring - 1/10 Pan Car - 1/10 Off-Road - CrawlersCont. Current (A): 160ABurst (A): 800ANr of Li-xx Cells: 2 - 3SBEC: 6V 5A or 7.4V 5AMotor Type: Sensored - SensorlessMotor Limits:2S Li-Po=> 3.5T - 1/10 On-Road=> 5.5T - 1/10 Off-Road3S Li-Po=> 5.5T - 1/10 On-Road=> 8.5T - 1/10 Off-RoadResistance: 0.00018 ohmDimensions: 37x33x22mm (30mm Fan)Weight: 43g (51g Fan)

Content current: 120ABurst current: 760ASuitable for: 1:10 and 1:12 RC CarMotor type: 540 Sensor BrushlessNiMh: 5-10 CellLipo/LiFE/Li-Ion: 2-3 CellBEC output: 3A@5VSize: 41,5x37x21mmWeight: 102g

Cont. Current: 120ABurst Current: 760ASuitable: 1:10 Short Course CarMotor Type: 2 Pol senorless Brushless Motor up to 5150kVNiMh: 5-12 CellLipo/LiFE/Li-Ion: 2-4 CellBEC Output: 6.0/7.4V 7ASize: 51x37x33mmWeight: 90g

The second generation of the Ezrun Max10 ESCs with 140A brings with it a variety of innovations and optimizations that make driving 1/10 short courses and trucks even more enjoyable. For example, the improved sensor mode with accompanying waterproof cable provides great throttle response - especially when paired with an Ezrun 3652/3665 G3 motor. Compared with the previous generation, MAX10 G2 also has stronger power and more stable output power. At the same time, of course, this brings excellent linearity even at low speeds.In terms of heat development, no other ESC can beat the MAX10 G2 so quickly. Thanks to an innovative protection system, the capacity of the capacitors has also been increased by 74% and are at the same time protected against overheating. Ultimately, this ensures better power transmission from the battery to the controller and overcharging is less likely than before.Technical SpecificationsType: 1/10 Brushless SensoredCurrent (cont./peak): 140A / 880AInput Voltage: 2-4S LiPoBEC: 6V/7.4V, 5AMotor Types: Brushless Motors (with/without sensor)Motor Limits: 3S LiPo: KV<=4000 - 3665er Motor4S LiPo: KV<=2600 - 4268er MotorFan: Yes, powered by BECFan Size: 30x30x10mmProgramming: LED Program CardLCD Program Box (G2)OTA Program ModuleSeperate Programming PortWaterproof: YesInput: XT60Output: 4.00mm Gold (female)Dimensions: 53x39.5x37.2mmWeight: 120gApplication: 1/10 Short Course Truck, Truck and Monster TruckOptional Accessories:HW30501003 LED Program CardHW30502001 LCD G2 Program BoxHW30850400 OTA Program Module

Sensored ESCWaterproof: noCont.Current: 60APeak Current: 380ACar Applicable:1/10 & 1/12 On-road / Off-road/ F1 / Drift car raceStreet race for fun / Club racing /STOCK race with 0 timing /Drift car raceMotor Limit:For 2S Lipo or 4-6 cells NiMH:- >=8.5T(1/10 On-road),- >=13.5T(1/10 Off-road)For 3S Lipo or 8-9 cells NiMH:- >=13.5T(1/10 On-road),- >=17.5T(1/10 Off-road) Battery: 4-9 cells NiMH, 2-3S LipoBEC Output: 6V@2A (Linear Mode), (The cooling fan gets its power supply from the built-in BEC)Size: 33x28x31.5mm with cooling fanWeight: 59g, (with wires, without cooling Fan)

Die QuicRun Serie von HobbyWing beinhaltet Brushed und Brushless Antriebssysteme. Bei den Brushless Systemen gibt es zudem sensorlose als auch sensor basierende Antriebe, somit bietet diese Serie für jeden Bedarf eine passende Lösung an. Die Serie ist zudem sehr kostengünstig und richtet sich in erster Linie an Anfänger und Fortgeschrittene Piloten. Sie überzeugt zudem durch die herausragende bekannte Qualität der Hobbywing Produkte als auch durch die unkomplizierte Inbetriebnahme.Eigenschaften- Wasser- & Staubgeschützt für den Einsatz bei jedem Wetter(Hinweis: Entfernen Sie den Lüfter vor der Benutzung mit Wasser, Reinigen und trocken Sie den Regler gleich nach der Benutzung um Schäden zu vermeiden.) - Proportionale Bremse mit einstellbarer max. Bremskraft sowie Automatik-Bremse- 9 verschiedene Beschleunigungsprogramme von "soft" bis sehr "aggressiv" können je nach Modell und Strecke gewählt werden.- Diverses Schutzfunktionen:- - Niederspannungsschutz für Akkus- - Thermischer Überhitzungsschutz- - Gassignal Verlustschutz- Einfache Programmierung über einen "Set" Knopf am Regler- Kompatibel mit der optionalen "LED Program Card" für eine noch einfachere Programmierung immer und überall.SpecificationsKonst. / Kurzzeitige Belastung: 30A/180AInnenwiederstand: 0.002OhmMotor Type Unterstützung: Sensorless Brushless MotorenAnwendung: 1/18 & 1/16 On-road/Off-road Buggy/MonsterMotor LimitFür 2S Lipo oder 6 Zellen NiMHOn-road: Motoren der 2435 Größe oder kleiner mit KV < 8000Off-road/Buggy/Monster: Motoren der 2453 Größe oder kleiner mit KV < 5000Für 3S Lipo oder 9 Zellen NiMHOn-road: Motoren der 2453 Größe oder kleiner mit KV < 5500Off-road/Buggy/Monster: Motoren der 2453 Größe oder kleiner mit KV < 3500Akkus: 4-9 Zellen NiMH2-3S LiPoBEC Ausgang: 6V / 1A (Linear Mode)Abmessungen (LxBxH): 36 x 28 x 16mmGewicht: 38g Externer Programmieranschluss: NeinArbeitsspannung des Lüfters: Ohne Lüfter

Spannungsbereich: 2-3S Lipo oder 5-9 NiMHMotor Limit: - 2S Lipo oder 6 Zellen NiMH: 540, 550 Baugröße Motor: >=12T oder U/Min < 30000 @7.2V - 3S Lipo oder 9 Zellen NiMH: 540, 550 Baugröße Motor: >=18T oder U/Min < 20000 @7.2VInnenwiederstand: Vorwärts 0.001O / Rückwärts 0.002OBEC Ausgang: 2A / 5V (Linear Mode)PWM Frequenz: 1KHzAbmessungen: 36,5 x 32 x 18Gewicht: 39gLüfter: OhneDer Regler kann über Jumper programmiert werden.Betriebsmodi: - Vorwärts / Bremse / Rückwärts - Vorwärts / Bremse - Vorwärts / Rückwärts (auch Crawler Mode genannt) Akku Type: LiPo / NiMH

Hobbywing QuicRun WP 1080 G2 Crawler ESCFour running modes are available - Fits a variety of control habits and control needs:Forward with brakesForward & reverse with brakesForward & reverseReal car running modeThe first ”Real Car Mode”The direction of the motor is switchable in real time by using the idle channel on the transmitter. Pull the trigger for "forward" Push the trigger for "brake" Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver) This new feature will provide the user with a unique experience unlike any other.Multiple, easy to set parameters15 Programmable Items let's drivers easily tune their vehicle with the LED Programming Box connected to the programming port.Temperature control upgradeThe New design reduces operating temperatures of the ESC by about 15 degrees improving reliability. The ESC also has a fan mount to meet additional cooling needsBEC UpgradeThe BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market.IP67 ProtectionIP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces.Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging.Features:Fully waterproof design for all conditions. (Note: please clean and dry it after use for avoiding rusty connectors)HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the CNC-machined aluminum reticular heat sink for great heat dissipation.High reliable electronic switch design prevents mechanical switch failure due to dirt, water, dust and etc.Tunable drag brake and drag brake rate for different vehicles, tracks and control feel. Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel.Innovative real car mode, make the downhill control of the vehicle more stable, and provide new fun for the car.It has the function of using transmitter (AUX channel) to adjust the drag brake force in real time, and switch the drag brake force anytime and anywhere according to the demand.Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection.Separate programming port to easily connect the LED program card to the ESC.Single-button ESC programming and factory reset.ESC programming via Hobbywing LED program cardSpecifications:Type: 1/10, Brushed, Waterproof ESCCont./Peak Current: 80A/400AInput Voltage: 2-3S Lipo / 5-9S NiMHBEC Output: 6/7.4/8.4V @ 4 (6A Peak)Input Wires: 14AWG-200mmOutput Wires: 14AWG-200mmInput Connector: XT60Output Connectors: 4.0mm Bullet Connectors (Female)Size: 37.2x31.9x18.4mmWeight: 70.2g (w/Wires)Motors: 540 & 550 Size Brushed MotorsVehicles: 1/10 Rock CrawlersFirmware Upgrade: Not SupportedESC Programing via:SET Button on ESC: SupportedLED Program Box: SupportedLCD G2 Program Box: Not SupportedOTA Programmer: Not SupportedProgram Port: Separate

The QuicRun 0880 Dual Brushed ESC has two sets of output wires for simultaneously connecting to two motors which are used synchronously. Its very convenient for vehicles which are driven by two motors.The waterproof and dust-proof design allows the QuicRun 0880 Dual Brushed ESC to be used in all weather conditions without any issue of damage caused to the ESC from water or debris.The adjustable PWM frequency combined with advanced DEO/freewheeling technology guarantees users great throttle linearity and driving feel. Multiple Programmable Items which features 15 programmable parameter is applicable to various vehicles and tracks.Features:- Control of 2 motors simultaneously- Strong BEC with 6V/4A- Water and dust proof- 15 programmable parameter items- PWM frequency adjustable- DEO/freewheeling technology for great throttle linearity and driving feeling- Separate programming port- Compact design Technical Specification:Typ and motor size: Brushed 540/550/775Current const./peak: 80A/400ACells: 2-4s LiPo / 5-12 Zellen NiMHMotor Limit 540/550: 2s LiPo, 6s NiMH: > 12T or < 30000 RPM3s LiPo, 9s NiMH: > 18T or < 20000 RPM4s Lipo, 12s NiMH: > 24T or < 15000 RPMWhen driving 2 motor, the Turns oft teh motors need to be increased accordingly.BEC: Switch Mode: 6V/4AInput connector: NoOutput connector: Bullet 4mm (female)Dimension: 45.9x34.7x26.5mmWeight: 75gWaterproof: YesApplicable: 1/8, 1/10 Rock CrawlerScope of Delivery:1x ESC1x Sticker1x ManualOptional Accessory:1x HW30501003 LED-Programm box

The new Pearl Evolution version 2 speed control and the Pure Evolution 8.5T brushless modified motor combine the two times World Championship winning brushless technology in an unbeatable combo of world class level modified racing! Step into the powerful world of brushless driving fun with NOSRAM! As a leading manufacturer of r/c speed controls and motors, NOSRAM can already look back upon years of expe-rience and multiple race victories around the world with brushless technology. NOSRAM brushless systems are the leading technology featuring extraordinary power and super smooth throttle response! Our brushless combos offer best performance at an attractive price! Get Started – the future is now! Key features Pearl Evolution version 2 • dual xps.mod software: independent adjustment of "feel" and "boost" • usb software updateability • revolutionary superBEC: constant 6V/3A output with 3.0V to 7.4V batteries • extra small size: 30.5x34mm Key features Pure Evolution • dismountable • EasySolderDesign • PreciSensorTM system• reproducible timing

Razer ten 60A ESC:Ob 1/10 on-road or 1/10 off-road, the Razerten 60A is always the first choice when reliability, efficiency and durability are paramount. A variety of settings and programming options leave nothing to be desired.All cables are already wired to the controller ready for connection, no soldering necessary. - Battery connection: T-connector,- Motor connection: 4mm sockets- Fully water and dust proof- ON/OFF switch with setup button- S-BEC with 6V and 3A peak current- Plug and Play, battery and motor connectors already soldered- Multiple protection devices: Undervoltage cut-off, thermal protection and protection in case of signal loss.- Easy programming via setup button- Separate programming port, easy connection of LED program card (optional)Technical data:Constant/peak current: 60A / 390AType: SensorlessMotor limit: 2s Onroad: 3650 motor, >=5.5T2s Offroad: 3650 motor, >=8. 5T3s Onroad: 3650 motor, >=9T3s Offroad: 3650 motor, >=13Tinternal resistance: 0.0012 OhmLiPo / NiMH battery pack: 2-3s LiPo / 6-9 cells NiMHS-BEC: 6V/3Aprogramming port: YesDimensions LxWxH: 48. 5x38x32mmWeight: 90gApplication: 1/10 On- and OffroadScope of delivery:1x controller ready wired with battery plug and motor connection1x manual